SOLICITATION NOTICE
J -- Polar Class (WAGB) Controllable Pitch Propeller (CPP) HUB Assembly Maintenance
- Notice Date
- 8/29/2011
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- HSCG85-11-R-PTRC96
- Archive Date
- 12/26/2011
- Point of Contact
- Amy A. Kelm, Phone: 2062176767
- E-Mail Address
-
amy.a.kelm@uscg.mil
(amy.a.kelm@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a Presolicitation Notice for POLAR CLASS (WAGB) CONTROLLABLE PITCH PROPELLER (CPP) HUB ASSEMBLY Maintenance. A base plus four-option years Indefinite Delivery, Indefinite Quantity supply contract is planned. Work will be accomplished at a contractor's facility during the base contract year of 01February2012 to 31January2013. Work during subsequent contract option years will be performed at the contractor's facility at the Government's discretion. The Coast Guard will be issuing a solicitation on or about the end of October 2011. It will be set-aside 100% for small business concerns. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. Note that small business concerns for set-asides are reminded that it is required that at least fifty (50) percent of the cost of personnel for contract performance be spent for employees of the concern (52.219-14,"Limitations on Subcontracting"). EXPECTED PERIOD OF PERFORMANCE: The contract is for an expected period of performance of a base year plus four option years; starting 01Febraury2012 and ending 31January2017. The base year is from 01February2012 to 31January2013. WORK DETAIL Work will include, but not be limited to the following: CPP Hub Assembly Overhaul (180 Days), CPP Adjusting Crank Renewal, Blade Machining, Locknut and Link Pin Fabrication, and Op-Rod Machining, CPP Trunnion Bushing Renewal, CPP Trunnion Diameter Restoration and Hub Transportation. HUB DETAIL Number of Hubs installed on each Cutter 3 (Total Hubs = 9) Right Hand/Clockwise Rotation as viewed from astern (Center & Stbd) 6 Left Hand/Counter Clockwise Rotation as viewed from astern (Port) 3 Hub Assembly Diameter 16' Hub Assembly & Shipping Stand Weight Approx 43 tons Number of Blades per Hub 4 Blade Weight Approx 6000# Hub Diameter 69" Shaft Speed 105 RPM Free Route 175 RPM Icebreaking Power 3,000 HP @ 105 RPM Shaft Speed 20,000 HP @175 RPM Shaft Speed GEOGRAPHIC RESTRICTION The following restriction is applicable to this procurement: Your facility for accomplishing the work shall be within 200 road miles of NESU Seattle at 1519 Alaskan Way S. Seattle, WA 98134. TECHNICAL AND LICENSING BARRIERS/LIMITS: a) Past performance clearly demonstrating work successfully performed of the same or similar type. b) A facility that has the equipment and skilled labor force to perform the work. c) All welding shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Thank you for your interest in this procurement.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG85-11-R-PTRC96/listing.html)
- Record
- SN02554063-W 20110831/110829235920-fb22a7dab1ea24435c3745f86381a4fc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |