PRESOL | 43 | Electronic Spray Paint System - Combined Synopsis Solicitation - SP330011Q1014

FBO DAILY ISSUE OF AUGUST 31, 2011 FBO #3567
SOLICITATION NOTICE

43 -- Electronic Spray Paint System - Combined Synopsis Solicitation - SP330011Q1014

Notice Date: 8/29/2011
Notice Type: Combined Synopsis/Solicitation
NAICS: 333912 — Air and Gas Compressor Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Distribution, J Avenue, DDC J7-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
ZIP Code: 17070-5001
Solicitation Number: SP330011Q1014
Point of Contact: Hilbert Caesar, Phone: 7177705516
E-Mail Address: hilbert.caesar@dla.mil
(hilbert.caesar@dla.mil)
Small Business Set-Aside: N/A
Description: Combined Synopsis (RFQ) - SP330011Q1014 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP330011Q1014. This is a Request for Quote (RFQ) and the solicitation number is SP330011Q1014. This solicitation is issued as UNRESTRICTED. The requirement consists of the following: This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-53 effective 4 Aug 2011 and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20110725 and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2011-19. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. This is a BRAND NAME or EQUAL acquisition; in accordance with FAR 52.211-16, a list of the salient physical, functional, or performance characteristics that "equal" products must meet are listed below. Line Item 0001 - (One (1) Wagner Flex Control Plus Paint System) Electronic Proportioning Spray Paint System (Includes an Electrostatic Gun) or "Equal To" with the following salient characteristics: Total Price: tiny_mce_marker _________________ Line item 0002 - Electrostatic Gun (Option) Total Price: tiny_mce_marker _________________ Note - Electrostatic Gun referenced in line one (1) is separate from that of line item two (2). Pricing shall be FOB Destination This procurement is for the purchase and upgrade of one (1) electronic proportioning spray paint dispensing system and additional equipment as described herein. The contractor shall provide all necessary supervision, labor, and materials to assemble and install the system to operational status. Contractor shall ensure all equipment furnished are from the manufacturer's most current production, meet current industry safety standards, conform to the best quality of materials, and workmanship. Accessories not specifically mentioned herein, that are necessary for the readiness of the system, shall be included, and named. The system shall be constructed so when it is installed, connected to power, and compressed air, it shall be easily accessible for adjustment, replacement, and repair. All transportation/shipping and installation/set-up shall be provided by the contractor. All equipment provided must meet the minimum characteristics listed below. SALIENT CHARACTERISTICS Minimum Requirements: a. The electronic proportioning spray paint dispensing system shall be equivalent to the Wagner Flex Control Plus Paint System or greater b. The spray paint unit shall be a manual wall mounted system installed near existing paint booth with the hose, spray gun, and remote keypad controller mounted inside paint booth. The spray paint gun shall be of the electrostatic type. c. The spray paint dispensing system shall be capable of dispensing five (5) or more different colors with one (1) flush system to handle washouts of water base and solvent based paints d. Spray paint dispensing system shall be capable of dispensing solvent based paints, epoxies, primers, and varnishes e. Mixing ratios shall be 1:1 and up to 50:1 f. The spray paint system shall deliver no less than.8 GPM g. Fluid ratios shall be controlled to +/- 1% with an alarm should ratios become out of range h. Shall contain pot life and mixing ration alarms for each installed paint gun i. The spray paint dispensing system shall utilize a touch screen computerized system to dispense paint mixtures and level control j. Valves and circulated ports must be color coded and must have a minimum of one port for the resin, one for the catalyst, and one for the solvent to both the A & B sides k. The spray paint dispensing system shall pump materials with viscosities ranging from 20-10,000 Mpas and record the flow rates of both A & B components l. The paint dispensing system shall operate at ambient temperatures between 41 to 122 degrees Fahrenheit m. Spray paint dispensing system shall be capable of dispensing premeasured/premixed amount of paint by a port other than the application spray gun n. Spray paint dispensing system shall be capable of using CARC paint with a dehumidifying system o. The spray paint dispensing system shall include one each component valves for resin, catalyst, and solvent and allow for expansion p. The software shall have the option for password protected alarm override to require POC approval to reset critical alarms q. The gear meters on the spray paint dispensing system shall be equipped with ball bearing for systems that used for water-based epoxy primers Options: One (1) additionally priced Electrostatic Gun as a second line item (labeled optional). The government may or may not award this item, which will depend on the availability of funds. Accessories - Contractor shall provide all accessories necessary for the connectivity / operation of the unit specified above. Colors - N/A Warranty Coverage - Warranty coverage shall be manufacturer's standard warranty but not less than one year parts and labor. Operator, Parts and Service Manual(s) and Training -The Contractor shall provide training to DLA Hill, Utah employees. All training shall be conducted by individuals well qualified in training matters, and the operation and maintenance of the contractor's furnished equipment. DLA Hill, Utah will determine the number of employees to be trained. Installation: Northeast corner of Building 1160. For exact address, see (Ship to/Delivery Address below). Clean-up - Contractor shall at all times keep the work area, including storage areas, free from accumulations of waste materials. Before completing the work, the Contractor shall remove from any rubbish, tools, scaffolding, equipment, and materials that are not the property of the Government. Upon completion of work, the Contractor shall ensure the area is in a clean, neat, and orderly condition. Requirements after the award of the contract: a. The contractor shall provide a set of spray paint dispensing system installation drawings to DDHU personnel at least 45 days prior to the scheduled delivery of the spray system. Drawings are to be submitted through the Contract Administrator at DDC HQ's. The drawings shall include all peripheral equipment and utility hook-ups for installed equipment. The drawings will be reviewed by DDHU personnel to determine the installed requirements and to finalize the installation site plans. b. The contractor shall ship, off-load, install and test the spray system at Hill AFB, Utah. The contractor shall instruct the carrier that the spray system shall be off-loaded only under the supervision of a representative of the contractor. The spray dispensing system shall remain the property of the contractor until it is accepted by DDHU personnel. All cost associated with the manufacturer, shipping, installation, testing, training, and preparation of the spray system for final acceptance at Hill AFB shall be the responsibility of the contractor. c. The contractor shall be responsible to furnish all tools and equipment required to install the spray paint dispensing system. The Government shall furnish no tools or equipment. d. The contractor shall supply and deliver with the spray paint dispensing system three original copies each of "as built" standard manuals containing all necessary electrical wiring diagrams, operators manuals, parts list, preventive maintenance instructions and manuals (drawings of spray paint dispensing system components and all other instructions for operation and maintenance of the spray paint dispensing system) Training and technical support requirements: e. Technical assistance shall be provided during installation and start-up. During start-up period, on-site training shall be provided to instruct DDHU personnel in the use, operation, and maintenance of the spray paint dispensing system. Technical assistance shall be provided with a 24-hour response time during the period of time of the manufacturer's warranty. Inspection and Run-off test requirements: The spray paint dispensing system shall pass the following tests or it shall be rejected: f. Ratio checks of A and B sprayers of 1:1, 2:1, 4:1, and 50:1 g. Two weeks of normal operation without downtime other than required cleaning and standard maintenance. h. Spray paint dispensing system shall meet all local, state, federal, and OSHA requirements for safe operation Government's responsibilities: i. Assisting the contractor onto the base and to the correct area. j. Assisting the contractor with obtaining proper badges and vehicle passes. k. Provide storage area for equipment prior to installation, and an area for equipment to be permanently located. l. Compliance with all city, state, and federal codes m. Ensure power and air supply is available to the paint dispensing system n. Make sure area is clean and any materials stored in this location are removed prior to arrival of the new equipment. o. Final approval of all the work being performed by the contactor. Delivery/Installation/Set-up/ Training: 60 days after receipt of award. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. SHIP TO: DEFENSE LOGISTICS AGENCY DLA DISTRIBUTION HILL, UTAH (DDHU) 6149 WARDLEIGH RD, BLDG 1160 HILL AFB, UTAH 84056-5702 Offerors shall provide the total price inclusive of all costs. If providing an "OR EQUAL" product, offerors must submit technical information which demonstrates that the item offered meets the minimum salient characteristics. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. The method of payment for supplies under this order is by the Acquisition Operations Office via the Government Purchase Card (VISA). The following FAR, DFARS, and DLAD clauses and provisions apply to this acquisition. The full text version of these clauses and provisions may be viewed at http://farsite.hill.af.mil/. SOLICITATION PROVISIONS: FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (e) multiple offers and (h) multiple awards. NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. FAR 52.211-6 -- Brand Name or Equal (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- Meet the salient physical, functional, or performance characteristic specified in this solicitation; Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) OFFER SUBMISSION INSTRUCTIONS-Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number (2) Solicitation number (3) Completed Representations and Certifications located at 52.212-3 and DFARS 252.212-7000 included in this solicitation (4) Unit Price and extended prices for all CLINS (5) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code (6) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation) (7) Descriptive literature for submissions of "equal" products to demonstrate the item meets the minimum salient characteristics found in this notice. Descriptive Literature: a. "Descriptive Literature" means information (e.g., cuts, illustrations, drawings, brochures) that is submitted as a part of a proposal. Descriptive Literature is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as (1) design; (2) materials; (3) components; (4) performance characteristics; and (5) methods of manufacture, assembly, construction or operation. The term includes only information required to determine the technical acceptability of the offered product. It does not include other information such as that used in determining the responsibility of a prospective contractor or for operating or maintaining equipment. b. Descriptive Literature, required elsewhere in this solicitation, must be (1) identified to show the item(s) of the offer to which it applies and (2) received by the time specified in this solicitation for receipt of offers. c. The failure of descriptive literature to show that the product offered conforms to the requirements of this solicitation may result in rejection of the offer. FAR 13-106-2 Evaluations of Quotations or Offers - Quotes will be evaluated in accordance with FAR 13.106. Evaluation - Award will be made to the lowest price technically acceptable contractor on all CLINS. The following criteria shall be used to establish technical acceptability: Submission of descriptive literature which clearly indicates that the equipment quoted meets all the Salient characteristics as stated in the combined synopsis/solicitation. Copies of Web Pages are not acceptable for technical evaluation, you must submit technical characteristics. Any contractor who has submitted technically acceptable information will then have its quote evaluated for price. Technical information shall be evaluated for acceptability (only) on a pass/fail basis and will not be rated. Any offeror who has been determined acceptable (pass) on their technical information will then have its quote evaluated for price. 52.217-4 - Evaluation of Options Exercised at Time of Contract Award (Jun 1988) Except when it is determined in accordance with FAR 17.206(b) not to be in the Government's best interests, the Government will evaluate the total price for the basic requirement together with any option(s) exercised at the time of award. (End of Provision) Pricing and descriptive literature (for "equal" submissions) are required NLT 4:00 PM EST ON 16 SEPTEMBER 2011. This information should be submitted to Hilbert Caesar at the following email address: Hilbert.Caesar@dla.mil or faxed to 717-770-7591 (EMAIL IS PREFERRED). Contractors must be capable of accepting payment by government credit card for this procurement. ALL SOURCES MUST BE REGISTERED IN THE CENTRAL CONTRACT REGISTRATION DATABASE, http://www.ccr.gov/, or an award cannot be processed. DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity's Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an "Agency Level Protest under Executive Order No. 12979." (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer's decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) FAR 52.212-4 - Contract Terms and Conditions-Commercial Items (JUN 2010), addenda to 52.212-4; the following clauses apply: FAR 52.247-34 - FOB Destination (NOV 1991) DLAD 52.247-9012 - REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) 52.217-7 - Option for Increased Quantity - Separately Priced Line Item (Mar 1989) The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor at time of award. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree. (End of Clause) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders-Commercial Items (AUG 2011) in paragraph (b) the following clauses apply: FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) FAR 52.222-3 Convict Labor (JUN 2003) FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (JUL 2010) FAR 52.222-21 Prohibition of segregated facilities (FEB 1999) FAR 52.222-26 Equal Opportunity (MAR 2007) FAR 52.222-36 Affirmative Action for Workers with Disabilities (OCT 2010) FAR 52.223-18 Contractor Policy to Ban Text Messaging While Driving (AUG 2011) FAR 52.225-13 Restriction on Certain Foreign Purchases (JUN 2008) FAR 52.232-36 Payment by Third Party (FEB 2010) FAR 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (AUG 2011) The following additional clauses/provisions apply: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (JAN 2009) DFARS 252.209-7001 Disclosure of ownership or control by the Government of a Terrorist Country (JAN 2009) DFARS 252-225-7035 BUY AMERICAN ACT-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE ALT 1 (DEC 2010) DFARS 252.225-7036 Buy American Act-Free Trade Agreement-Balance of Payments Program ALT I (DEC 2010) DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) DFARS 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) DFARS 252.243-7002 Request for Equitable Adjustment (MAR 1998) DFARS 252.247-7023 Transportation of Supplies by Sea ALT III (MAY 2002) (End of Clause) 52.212-3 - Offeror Representations and Certifications -- Commercial Items (May 2011) An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision-- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Inverted domestic corporation," as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Coe at 26 U.S.C. 7874. "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov.After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror prepresents that- (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate in reference to the WOSB concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern or concerns that are participating in the joint venture: _________.] Each WOSB concern participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [_] is, [_] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate in reference to the EDWOSB concern or concerns that are participating in the joint venture. The offeror shall enter the name or names of the EDWOSB concern or concerns that are participating in the joint venture: _____________. Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either- (A) It [_] is, [_] is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the CCR Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It [_] has, [_] has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.] (11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act - Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Supplies." (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and ‘United States' are defined in the clause of this solicitation entitled "Buy American Act--Free Trade Agreements--Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.: ___________________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.: Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed End Product Listed End Product: Listed Countries of Origin: (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] (1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.] (3) Taxpayer Identification Number (TIN). [_] TIN:_____________________. [_] TIN has been applied for. [_] TIN is not required because: [_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [_] Offeror is an agency or instrumentality of a foreign government; [_] Offeror is an agency or instrumentality of the Federal Government; (4) Type of organization. [_] Sole proprietorship; [_] Partnership; [_] Corporate entity (not tax-exempt); [_] Corporate entity (tax-exempt); [_] Government entity (Federal, State, or local); [_] Foreign government; [_] International organization per 26 CFR 1.6049-4; [_] Other ____________________. (5) Common parent. [_] Offeror is not owned or controlled by a common parent: [_] Name and TIN of common parent: Name ____________________________________ TIN ______________________________________ (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. (2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Sanctioned activities relating to Iran. (1) Unless a waiver is granted or an exception applies as provided in paragraph (o)(2) of this provision, by submission of its offer, the offeror certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act of 1996. (2) The certification requirement of paragraph (o)(1) of this provision does not apply if-- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (End of Provision) Alternate I (Apr 2011). As prescribed in 12.301(b)(2), add the following paragraph (c)(12) to the basic provision: (12) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) or (c)(10) of this provision.) [The offeror shall check the category in which its ownership falls]: ____ Black American. ___ Hispanic American. ___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, U.S. Trust Territory or the Pacific Islands (Republic of Palau), Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ___ Individual/concern, other than one of the preceding. All questions and inquiries should be addressed via E-mail to Hilbert.Caesar@dla.mil, Request for Quote Number SP330011Q1014.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP330011Q1014/listing.html)
Place of Performance: Address: DEFENSE LOGISTICS AGENCY, DLA DISTRIBUTION HILL, UTAH (DDHU), HILL AFB, Utah, 84056-5702, United States; Zip Code: 84056-5702
Record: SN02553787-W 20110831/110829235638-c01b7deefd2791061b5b36637789ef3f (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

43 -- Electronic Spray Paint System - Combined Synopsis Solicitation - SP330011Q1014