SPECIAL NOTICE
65 -- Sole source for AudioMetric Booth.
- Notice Date
- 8/3/2011
- Notice Type
- Special Notice
- NAICS
- 334510
— Electromedical and Electrotherapeutic Apparatus Manufacturing
- Contracting Office
- Medcom Contracting Center North Atlantic, ATTN: MCAA NA Bldg T20, 6900 Georgia Avenue NW, Washington, DC 20307-5000
- ZIP Code
- 20307-5000
- Solicitation Number
- W91YTZ11T0089
- Archive Date
- 11/1/2011
- Point of Contact
- mary.a.martin, 910-643-1978
- E-Mail Address
-
Medcom Contracting Center North Atlantic
(mary.a.martin@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a notice of the Government's intent to solicit, negotiate and award a sole source contract to Grason-Stadler. The requirement is for the purchase and installation of a AudioMetric Six Man Booth for the Department of Preventive Medicine, Army Hearing Program located at Womack Army Medical Center (WAMC), Fort Bragg, NC 28310. The proposed requirement and certification of sound proof OSHA requirements. This includes perimeter around the booth and test locations. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. No compatibles or substitutes accepted. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received after the date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Parties interested in the future announcements shall provide detailed information of their capabilities and certification to clearly meet requirements stated below. Outside dimensions:7 feet 6 inches by 8 feet 10 inches, 7 feet 10 inches tall OUTER DIMENSIONS 6 person testing booth * Overall internal measuring 6'-2" x 7'-6" All utilities are roof mounted Total estimated design weight: 3249 lbs Floor Panel construction: Architectural (p-75), with 11Ga. Solid steel top surface Interior wall panel construction Noise Lock V (P-150-I) Interior roof panel construction Noise Lock VI (P-152) Interior wall surface are 22 Ga. Stucco embossed perforated steel Interior roof surface are 22 Ga stucco embossed perforated steel Exterior wall surface are 14 Ga. Stucco embossed solid steel Exterior roof surface surface are 16 Ga. Solid steel Finish: Baked acrylic enamel paint (color: Khaki Shade) Floor covering: industrial nylon carpet (color: Brown Fawn) Note: 3/8" thick underlayment and 2 1/2" H black cove base molding included Door(s): (1) 2'-9 ' wide x 6'-0 ' high clear opening, STC-61, cam-lift, split-frame with push plate and pull handles Dimensions locating door(s) are shown to the clear opening Window(s): (1) aluminum frame double glazed with " and " thick laminated safety glass (es) (size: 2'-6"x2'-10") Vibration isolator rails to be provided 4" Minimum clearance is required between the exterior of testing booth and host facility walls/ceiling Maximum panel width: 3'11 5/8" Maximum panel length: 8'-1 " Maximum panel thickness: 7" Customer to ensure adequate site access Ventilation: 140 CFM system comprised of integrated spasaver exhaust/inlet ceiling silencer panels and 120V, 60HZ, 14W inlet fans Electrical: (2) 120V recessed incandescent light fixture(s) (2) 120V toggle switches (es) (1) 120V hospital grade duplex receptacles (1) 120V quad receptacle box with power cord (roof mounted) (1) JP-81 aluminum jack panel(s) comprised of: (12) Switchcraft # 12b jacks (inside/exam and outside/control) (2) USB connectors (Type A inside/exam and Type B outside/control (1) 2"I.D. snap bushings with plugs (inside/exam and outside/control (Lot) boxes, connectors, etc. as required for complete installation Note: -Customer to provide 120V, 60HZ power to (1) roof mounted quad receptacle box power cords All electrical is wired per 2002 National Electrical Code NOISE REDUCTION, dB** 1/1 Octave Band Center Frequency, Hz.1252505001K2K4K8KNIC 800a / Single Wall Plus Series3750576771757460 Booth to be sold and installed by local company (within 100 miles) for proper site coordination and field visits to ensure proper installation. This is also to include proper support post installation should any service be required. Responses via email ONLY to Mrs. Mary Martin at mary.a.martin@us.army.mil no later than 12 August 2011 @ 3:00 PM EST. No telephonic request will be honored.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/MEDCOM/DADA15/W91YTZ11T0089/listing.html)
- Record
- SN02520791-W 20110805/110804000007-9c0bb33a307b76e065da5991e584d233 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |