Loren Data's SAM Daily™

FBO DAILY ISSUE OF JUNE 08, 2011 FBO #3483
MODIFICATION

70 -- RFID MOUNTING HARDWARE - Amendment 1

Notice Date

6/6/2011
 

Notice Type

Modification/Amendment
 

NAICS

335932 — Noncurrent-Carrying Wiring Device Manufacturing
 

Contracting Office

Defense Logistics Agency, DLA Acquisition Locations, DLA Distribution, J Avenue, DDC J7-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
 

ZIP Code

17070-5001
 

Solicitation Number

SP3300-11-Q-0129
 

Archive Date

6/23/2011
 

Point of Contact

Patrick S. VanSant, Phone: 7177704092
 

E-Mail Address

patrick.vansant@dla.mil
(patrick.vansant@dla.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

Amendment 0001 General information: Document Type: Combined Synopsis Solicitation Solicitation Number: SP3300-11-Q-0129 Posted date: 16 May 2011 Opening Response Date: 16 May 2011 Question Period Close: 24 May 2011 Closing Response Date: 08 June 2011 Archive Date: 14 June 2011 Classification Code: 70- General Purpose Information technology Equipment NAICS Code: 335932- Noncurrent-Carrying Wiring Device Manufacturing Contracting Office: Defense Logistics Agency, Acquisition Operations, DLA Distribution, 2001 Mission Drive, Bldg 404, J7-AB, New Cumberland, PA 17070-5000, United States Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number for this notice is SP3300-11-Q-0129. This is 100% small business set-aside procurement for a contractor that can provide brand name Jamison Door Company RFID Mounting hardware or equivalent. Standard commercial warranty should be included in all offers for the RFID Mounting Hardware. The associated NAICS code is 335932. The size standard is 500 employees for this NAICS Code. This procurement is for the purchase of RFID MOUNTING HARDWARE for DLA Information Operations at DLA Distribution. The "Line Items" (attachment 1) lists the brand name Jamison Door Company Part Numbers for the RFID Mounting Hardware. If offeror chooses to submit a quotation for equivalent RFID Mounting Hardware it must conform to the attached "Salient Characteristics" (attachment 2). See Continuation Sheet for Supplies and Services (Attachment 1). Offerors shall provide the unit price for each component and the total amount, inclusive of shipping costs (FOB Destination). Supplies shall be shipped to the locations shown below, exact shipping addresses will be provided in the final award, or can be obtained from the Contract Specialist POC. Delivery Site: DLA/J6NIT Building 1 Section 8 S Avenue New Cumberland, PA, 17070 Note: All offers should include the anticipated delivery date. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. The method of payment for supplies under this order is by the Acquisition Operations Office via the Government Purchase Card (VISA). This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-51 effective 02 May 2011and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20110511 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2011-11. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. The following FAR, DFARS, and DLAD clauses and provisions apply to this acquisition. The full text version of these clauses and provisions may be viewed at http://farsite.hill.af.mil/. FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (e) multiple offers and (h) multiple awards. NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. 52.211-6 -- Brand Name or Equal (Aug 1999) (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of Provision) DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity's Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an "Agency Level Protest under Executive Order No. 12979." (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer's decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) OFFER SUBMISSION INSTRUCTIONS-Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number (2) Solicitation number (3) Unit Price and extended prices for all CLINS (4) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code (5) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation) (6) Offerors providing an item other than the brand name (Jamison Door Company) should include product literature that demonstrates the ability of the item to meet all the salient characteristics. (See attachment 1) 2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award. FAR 13.106-2 Evaluations of Quotations or Offers - Quotes will be evaluated in accordance with FAR 13.106. The Government intends to award a Firm-Fixed Price commercial contract resulting from this notice on an all or none basis to the responsible offeror whose offer is the lowest price and has demonstrated compliance with the stated salient characteristics and can meet the stated delivery requirements. To demonstrate compliance with the stated minimum requirements offerors must submit the information required by FAR 52.211-6(b) detailed in this notice. FAR 52.212-4 Contract Terms and Conditions-Commercial Items, Addenda to 52.212-4; the following clauses apply: FAR 52.247-34 FOB Destination FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders-Commercial Items (in paragraph (b)) the following clauses apply: FAR 52.219-6 Notice of Small Business Set-Aside FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies FAR 52.222-21 Prohibition of Segregated Facilities FAR 52.222-22 Previous Contracts and Compliance Reports FAR 52.222-25 Affirmative Action Compliance FAR 52.222-26 Equal Opportunity FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.222-50 Combating Trafficking in Persons FAR 52.225-13 Restriction on Certain Foreign Purchases FAR 52.232-36 Payment by Third Party FAR 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. The following additional clauses/provisions apply: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials DFARS 252.247-7023 Transportation of Supplies by Sea (ALT III) DFARS 252.212-7000 Offeror Representations and Certifications - Commercial Items DLAD 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) Offerors must submit a completed copy of FAR 52.212-3 Offeror Representations and Certifications-Commercial Items with the price offer or may complete the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal will render an offeror ineligible for award. The following FAR, DFARS, and DLAD clauses and provisions apply to this acquisition. The full text version of these clauses and provisions may be viewed at http://farsite.hill.af.mil/. All questions and inquiries should be addressed via email by COB 24 May 2011 to patrick.vansant@dla.mil Request for Quote Number SP3300-11-Q-0129. Pricing and representations/certifications are required NLT 11:00 AM EDT ON 08 JUNE 2011. This information should be submitted to above email address or faxed to 717-770-7591. Contractors must be capable of accepting payment by government credit card for this procurement. ALL SOURCES MUST BE REGISTERED IN THE CENTRAL CONTRACT REGISTRATION DATABASE, http://www.ccr.gov/, or an award cannot be processed.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP3300-11-Q-0129/listing.html)
 

Place of Performance

Address: Building 1 Section 8, S Avenue, New Cumberland, Pennsylvania, 17070, United States

Zip Code: 17070
 

Record

SN02465255-W 20110608/110606234912-45ce365428f08ddfd54142bedaa01b9a (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |