SOLICITATION NOTICE
A -- Thin porous metal sheets
- Notice Date
- 5/27/2011
- Notice Type
- Presolicitation
- NAICS
- 325998
— All Other Miscellaneous Chemical Product and Preparation Manufacturing
- Contracting Office
- Department of Energy, Pacific Northwest National Laboratory - Battelle (DOE Contractor), PNNL Licensing, PO Box 999, MSIN K1-73, Richland, Washington, 99354
- ZIP Code
- 99354
- Solicitation Number
- IPID_16158_CIP
- Archive Date
- 7/12/2011
- Point of Contact
- Eric C Lund, Phone: 509/375-3764, Connie Mitzel-Faulk, Phone: 5093753847
- E-Mail Address
-
eric.lund@pnl.gov, connie.mitzel-faulk@pnl.gov
(eric.lund@pnl.gov, connie.mitzel-faulk@pnl.gov)
- Small Business Set-Aside
- N/A
- Description
- Pacific Northwest National Laboratory (PNNL), operated by Battelle Memorial Institute under contract to the U.S. Department of Energy, solicits interest from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. PNNL may also be available to licensee(s) to assist in further research and development of the technology under a sponsored research agreement or CRADA program. THE TECHNOLOGY: A method to make thin porous metal sheets. The thin, porous metal sheets are less than or equal to approximately 200 microns thick, have a porosity between 25% and 75% by volume, and have pores with an average diameter less than or equal to approximately 2 micron. The thin, porous metal sheets can be fabricated by preparing a slurry having between 10 and 50 wt% solvent and between 20 and 80 wt% powder of a metal precursor. The average particle size in the metal precursor powder should be between 100 nm and 5 micron. For all inquiries, please reference IPID 16158 CIP NOTE: THIS IS NOT A PROCUREMENT. Any company interested in licensing this technology must respond with a letter of interest (may be submitted by e-mail) no later than thirty (30) days from the publication date of this Notice summarizing the company's business and technical expertise and motivation for pursuing this opportunity. Companies deemed appropriate will be provided with further information on the technology. Such information may require an executed Nondisclosure Agreement. Respondents wishing to enter into negotiations for a commercial license will be required to submit a business plan for the commercialization of the technology prior to licensee(s) selection and negotiations. Please send letters of interest to the attention of the POC identified within this Notice, referencing IPID 16158 CIP.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/PNNL/LIC/IPID_16158_CIP/listing.html)
- Record
- SN02459481-W 20110529/110527234620-4801acd6baf2a88ef5b8621381ae67e0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |