SOURCES SOUGHT
17 -- Moriah Wind System
- Notice Date
- 5/25/2011
- Notice Type
- Sources Sought
- NAICS
- 334290
— Other Communications Equipment Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department, Hwy. 547 Attn:B562-3C, Lakehurst, New Jersey, 08733-5083
- ZIP Code
- 08733-5083
- Solicitation Number
- N68335-11-RFI-7300
- Archive Date
- 7/9/2011
- Point of Contact
- Melissa Bucci, , Darla M. Kelly,
- E-Mail Address
-
melissa.bucci@navy.mil, darla.kelly@navy.mil
(melissa.bucci@navy.mil, darla.kelly@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS A REQUEST FOR INFORMATION ONLY. It is not a Request for Proposal, a Request for Quotation, an Invitation for Bids, a solicitation, or an indication that the PMA-251 Program Office or NAVAIR will contract for the items contained in the RFI. The Naval Air Warfare Center Aircraft Division Lakehurst is seeking to continue the modernization of the U.S. Fleet wind systems in accordance with the Statement of Work. The aforementioned Statement of Work contain Export Controlled Data and are subject to the Arms Export Control Act (Title 22, U.S.C SEC 2751). Contractors must be certified by the Defense Logistics Services Center and have a current DD2345 on file. To request a copy of the Statement of Work, please contact Ms. Melissa Bucci at melissa.bucci@navy.mil. Please include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement, with your request. For DD2345 information call DLIS in Battle Creek, MI at 800-352-3572 or visit the Internet at http://www.dlis.dla.mil/jcp. A description of the Moriah system follows: MWS provides digital wind speed and direction information, including crosswind and headwind, that supports decision making for air operations, combat, navigation, tactical planning and firefighting. The MWS replaces legacy Type F Wind Measuring and Indicating System, providing a single wind measuring system, consistent across all ship classes and shore stations. MWS consists of 4 parts: • Wind sensor with non-moving parts • Dual redundant processor capable of interfacing with legacy wind and ship systems and Local Area Networks (LANs) • High-End Display (HED) with full range of available wind information and ship speed/ course data, including Aircraft Recovery Bulletins (ARBs), Launch and Recovery Envelopes (LREs) and Final Course data. HED is hardwired to a sensor in a safety critical configuration. HED fits inside an envelope no larger than11.50” high by 18.00” wide by 9.53” deep. This does not include maintenance access, connector access or environmental excursions. • Low-End Display (LED) with basic wind information and ship speed/course data. LED fits inside an envelope no larger than 7.36” high by 11.10” wide by 6.06” deep. This does not include maintenance access, connector access or environmental excursions. • The sensors, HEDs and LEDs are uniform across ship classes and shore stations, with the quantity of each item dependent upon ship class/shore location. Every MWS has one dual-redundant processor, which will differ depending upon ship class and shore station either of which can individually perform all the functions necessary to keep MWS running. The sub-processors communicate with each other directly and periodically to determine functional status and to allow changes in control when a failure is detected. MWS accesses unclassified data only. • There is a degree of system-to-system information exchange in MWS. Neither MWS nor its components are connected to the Global Information Grid (GIG). MWS data is output from its processor in several ways: 1) synchro interfaces to provide wind information to legacy systems (SLQ-32, SPN-46, Integrated Launch and Recovery Television System, and Arresting Gear Crosscheck System); 2) serial and network interfaces for output of wind, navigational and system information to displays; and 3) network interfaces to communicate wind information to other ship and shore station displays. Currently, MWS will communicate over Aviation Data Management and Control System (ADMACS) on CVNs, through Digital Multiplex System (DMS) on DDGs and on a Moriah controlled network on all other ship classes. • Wind data is transmitted in the OD19 data format and the National Marine Electronics Association (NMEA) data format. • MWS receives the ARBs it displays through ADMACS via Network File System (NFS). • In order to display ship’s speed and direction, as well as pitch and roll, MWS receives a data packet from Navigation Sensor System Interface (NAVSSI), which contains a host of navigational data, including ship’s positional information. MWS is not using any of this other information, although it must read the entire NAVSSI data packet prior to extracting the data required. The information in this packet is not sensitive unless the information is to be transmitted off the ship. However, MWS has no mechanism for transmitting data off the ship, nor any requirement to do so. MWS uses strictly defined data types for transmission into and out of the system. This information is limited to either NMEA ASCII strings using checksums to determine data integrity, structured binary data format using checksums to determine data integrity, proprietary DMS Light Internet Protocol (DLIP), and analog synchro resolver output to legacy systems. The data items themselves are confined to information from known systems (as defined in the Interface Requirements Specifications) or is confined to IP addresses and ports specified in the Interface Design Documents and the network architecture (ADMACS or DMS). The components contain no TELNET or File Transfer Protocol (FTP) capability. Configuration is done via a manual procedure where a laptop is attached to the system components using a serial cable (RS-422) and programming is done via vendor supplied software applications. Since only a standard laptop computer is needed for this, it is not included as part of MWS. The processor software was written to run under a tailored Linux Operating System with minimal functionality on an Intel platform. This operating system consists of a Linux kernel that has been built specifically for use in this environment that will aid security. It contains only those device drivers and services that are relevant to this embedded environment. Software design protects system integrity by the fact that unauthorized personnel do not have the ability to modify the software configuration, data or application. MWS is not designed for use or visibility on the internet and there is no access to the internet. MWS uses UDP/IP & TCP/IP for unicast and multicast communication protocols. NAVAIR Lakehurst is requesting information from industry for the purpose of identifying qualified contractors interested in bidding on the possible re-competition of the expiring production contract of the Moriah Wind System (MWS). The objective of the new contract is to continue production of the MWS, provide for the insertion of technology refreshed components to address obsolescence issues, and to provide back fit kits to apply the same technology refreshed components to deployed systems. No significant new capabilities are expected to be developed for the MWS. Companies interested in participating in the MWS program are asked to respond to this RFI with a brief summary of their knowledge, capabilities and experience in the areas of: (1) ship wind systems design, development, and testing; (2) DoD systems engineering and technical review process; (3) display systems and network technology; (4) modeling and simulation in development and testing; (5) embedded sensors and instrumentation in harsh environments; (6) experience with software development software maintenance; (7) company CMMI certification; (8) system integration with ship information systems; (9) technology upgrades, component refresh and obsolescence integration; (10) system supportability and logistical support. Respondents to this RFI should provide programmatic, technical, supportability and experience information on their ability to potentially design, develop, integrate, test, install and support a MWS for US Navy surface ships. The MWS can be either a system currently available as a commercial or non-developmental item that meet the requirements in this RFI, or systems and/or products in development that will meet the requirements stated in the RFI. NAVAIR would also like to gain insight from industry (primes and vendors) on several key areas to assist in MWS planning. Interested companies in all or part of the system components are encouraged to: A) Provide a notional architecture, estimated Source Lines of Code (including new, reused, and modified) of software based on similar efforts. B) Provide feedback on interoperability challenges, including but not limited to: ship system integration. C) Provide a notional development and integration schedule assuming a contract award in March 2013. D) Provide development and production rough order of magnitude cost estimates with supporting ground rules and assumptions. Alternatively, for the technical/architecture solution you used to generate your response to this RFI, provide sufficient detail to support development of a notional cost assessment. NAVAIR will not pay respondents for any information generated for or provided in response to this RFI. Submit your response in a Microsoft® Word or compatible format document in no more than twenty single-sided, single-spaced pages, 12-point, Times New Roman font, using a minimum of one-inch margins. Responses to this RFI are requested by 4:00 PM on 24 June 2011. Responses should cite RFI number N68335-11-RFI-7300 and be addressed to the attention of Ms. Melissa Bucci, Code 2.5.2.5.2MB. Respondents are notified that a formal solicitation MAY NOT necessarily result from this RFI. The Government will not pay for any information received in response to this request, nor will the Government compensate any respondent for any costs incurred in developing the information provided to the Government. The Government will not release any information marked with a Proprietary legend, received in response to this RFI, to any firms, agencies, or individuals outside of the Government without written permission in accordance with the legend.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N68335-11-RFI-7300/listing.html)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN02456628-W 20110527/110525234652-0a98b4f5fc830e57e186ff9803736d7e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |