MODIFICATION
99 -- Tools for FM
- Notice Date
- 4/19/2011
- Notice Type
- Modification/Amendment
- Contracting Office
- Dubai World Trade Centre, Dubai, 9343
- ZIP Code
- 00000
- Solicitation Number
- PR
- Response Due
- 5/2/2011
- Archive Date
- 10/29/2011
- Point of Contact
- Name: Anis Ghali, Title: Procurement Agent, Phone: 0097143116000, Fax: 0097143116196
- E-Mail Address
-
ghaliax@state.gov;
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is PR and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 452111 with a small business size standard of $27.00M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-05-02 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Multiple shipping information. The Department of State requires the following items, Brand Name or Equal, to the following: LI 001, Item Description Model#Manufacturer Atrium Man lift Portable2630ESJLG, 1, EA; LI 002, Item DescriptionModel#Manufacturer Articulating Narrow Boom Lift600ANJLG, 1, EA; LI 003, Item DescriptionModel#Manufacturer Thermal ScannerFLIR T400-AP-NISTFLIR, 1, EA; LI 004, Item Description Model#Manufacturer Non Destructive Moisture MeterM254Tramex, 1, EA; LI 005, Item DescriptionModel#Manufacturer Conduit and Pipe TracerCT326BAmprobe, 1, EA; LI 006, Item DescriptionModel#Manufacturer Recording VoltmeterU1401AAgilent Technologies, 1, EA; LI 007, Item DescriptionModel#Manufacturer Air Compressor1WD44SPEEDAIRE, 1, EA; LI 008, Item DescriptionModel#Manufacturer Air Hose and Reel83753LINCOLN, 1, EA; LI 009, Item DescriptionModel# Manufacturer Refrigerant Leak DetectorD440A-CSUPERCOOL, 1, EA; LI 010, Item DescriptionModel#Manufacturer Power Analyzer 43B Fluke, 1, EA; LI 011, Item DescriptionModel#Manufacturer Light Meter HD400Extech, 1, EA; LI 012, Item DescriptionModel#Manufacturer HV meter, up to 40,000 voltsHV-44AB&K Precision, 1, EA; LI 013, Item DescriptionModel#Manufacturer Vibration Meter 407860Extech, 1, EA; LI 014, Item DescriptionModel#Manufacturer CO analyzer 19-8104BACHARACH, 1, EA; LI 015, Item Description Model#Manufacturer Combustible gas detectorTIF8800ATIF, 1, EA; LI 016, Item Description Model#Manufacturer Laser Level, Rotary electronic57-LM800DICST/Berger, 1, EA; LI 017, Item DescriptionModel#Manufacturer Digital Manometer Accessory Kit, 02-100-281-79Dwyer, 1, EA; LI 018, Item DescriptionModel#Manufacturer Micro Anemometer, Thermo45158Extech, 1, EA; LI 019, Item Description Model#Manufacturer Data logger, sound level calibrator 407766Extech, 1, EA; LI 020, Item Description Model#Manufacturer Data logger, Sound Level meterHD600Extech, 1, EA; LI 021, Item DescriptionModel#Manufacturer Earth Ground Tester Kit,- 299.9 ohms, Fluke - 1625 KitFluke, 1, EA; LI 022, Item DescriptionModel#Manufacturer Fulk 434 Power Quality Analyzer Kit, NEPAFluke - 434Fluke, 1, EA; LI 023, Item DescriptionModel#Manufacturer Thermometer, Infrared, 68Fluke, 1, EA; LI 024, Item Description Model#Manufacturer Thermometer, Inputs, 2, 54-2Fluke, 1, EA; LI 025, Item DescriptionModel#Manufacturer PVC Heater/Bender, 849Greenlee, 1, EA; LI 026, Item DescriptionModel#Manufacturer Tester, Phase Sequence, 5712Greenlee, 1, EA; LI 027, Item Description Model#Manufacturer Megohmmeter, Hand crank, 210170Megger, 1, EA; LI 028, Item Description Model#Manufacturer Lanyard, 6ft, 2 leg, polyester, 913TWLS/6FTGKMiller, 4, EA; LI 029, Item DescriptionModel#Manufacturer Model 600 Power Drive Treading Machine600/36912Ridgid, 1, EA; LI 030, Item DescriptionModel#Manufacturer Pipe Cutter 820Ridgid, 1, EA; LI 031, Item DescriptionModel#Manufacturer Pipe Reamer 341Ridgid, 1, EA; LI 032, Item DescriptionModel#Manufacturer Pipe Threading Machine1822-1Ridgid, 1, EA; LI 033, Item Description Model#Manufacturer Portable Yoke Pipe vise 40ARidgid, 1, EA; LI 034, Item Description Model#Manufacturer Threading Machine Stand Used with 5A191200ARidgid, 1, EA; LI 035, Item Description Model#Manufacturer Toilet Auger, Telescoping Closet AugerK-6/59797Ridgid, 4, EA; LI 036, Item Description Model#Manufacturer Mower, 3 in 1. Self Propel, 21", 7800179Snapper, 2, EA; LI 037, Item DescriptionModel#Manufacturer Analyzer, HVAC, TifVA500ATIF, 1, EA; LI 038, Item DescriptionModel#Manufacturer ORP Electrode sensor1008-4YSI, 1, EA; LI 039, Item DescriptionModel#Manufacturer ORP, meterORP-15YSI, 1, EA; LI 040, Item DescriptionModel#Manufacturer Sump Pump, ST840/102JGA5Dayton, 4, EA; LI 041, Item DescriptionModel#Manufacturer Rear Utility golf cartGator HPX 4x4 DieselJohn Deere, 2, EA; LI 042, Item Description Model#Manufacturer 1 HP, 1 Phase Gast Regenerative BlowersG3289913GAST, 4, EA; LI 043, Item DescriptionModel#Manufacturer 17 PTS ADJ Humidistat CD35 DehumidifierG1387408EBAC, 4, EA; LI 044, Item DescriptionModel#Manufacturer Backflow Preventer Test Kit5AJ67WATTS, 1, EA; LI 045, Item DescriptionModel#Manufacturer 7000 LB Pneumatic Tire Diesel ForkliftC35 DCLARK MATERIAL HANDLING CO, 1, EA; LI 046, Item Description Model#Manufacturer Chem. Sorb Spill Response PackSRP-CHEM3M, 10, EA; LI 047, Item DescriptionModel#Manufacturer Pressure Washer A52416MI T M CORP, 1, EA; LI 048, Item DescriptionModel#Manufacturer Drill Press, Floor, 20 in.6W282Dayton, 2, EA; LI 049, Item DescriptionModel#Manufacturer Vise, Wood work78AWilton, 1, EA; LI 050, Item DescriptionModel#Manufacturer Complete Bench Grinder Package, 12 in.1FYX2Dayton, 2, EA; LI 051, Item Description Model#Manufacturer Silicon Carbide Grinding Wheel, 12 in.66253263056Norton, 1, EA; LI 052, Item DescriptionModel#Manufacturer Sander, Belt/Disc4TJ97Dayton, 1, EA; LI 053, Item Description Model#Manufacturer Table Cabinet Saw, 12 in., Right Tilt2LKP6Dayton, 1, EA; LI 054, Item DescriptionModel#Manufacturer Saw Blade, Carbide Tip35-7654Delta, 5, EA; LI 055, Item DescriptionModel#Manufacturer Drill Bit Set, 115 Pieces, HSSC21127CLE-LINE, 2, EA; LI 056, Item Description Model#Manufacturer Planer, 20 in., 5 HP, Helical HeadJWP-208HHJet, 1, EA; LI 057, Item DescriptionModel#Manufacturer Portable AC Unit, 23,300 BtuHOffice Pro 24Movincool, 4, EA; LI 058, Item DescriptionModel#Manufacturer Electric Arc Welder900751Miller, 1, EA; LI 059, Item DescriptionModel#Manufacturer Vertical Milling Machine, 3HP, 3PHJTM-4VSJet, 1, EA; LI 060, Item DescriptionModel#Manufacturer Milling Vise, 8 in.PWS-8110Parlec, 1, EA; LI 061, Item DescriptionModel#Manufacturer Keyseat Cutter Set, 10 Pc, HSS, STAG60105KEO, 1, EA; LI 062, Item DescriptionModel#Manufacturer Milling Machine Starter Set, R8, 99 Pc.4LEY1Dayton, 1, EA; LI 063, Item DescriptionModel#Manufacturer Engine Lathe w/DRO, 14x40, 3HP, 3PHD360x1000Optimum, 1, EA; LI 064, Cutting Tool Kit HM 16 mmOptimum, 1, EA; LI 065, Collate Kit 5COptimum, 1, EA; LI 066, Item DescriptionModel#Manufacturer Plasma Cutter, 27A903891Miller, 1, EA; LI 067, Item DescriptionModel#Manufacturer HD Oxy Act Combination Torch OutfitHTA-30300Smith Equipment, 1, EA; LI 068, Item Description Model#Manufacturer Dial Indicator, antimagnetic, back plunger196A6ZStarrett, 1, EA; LI 069, Item Description Model#Manufacturer Dial Caliper w/ Case, 8 in.1202-8Starrett, 1, EA; LI 070, Item Description Model#Manufacturer Micrometer Set, 0 to 6 in.S436 1CXRLZStarrett, 1, EA; LI 071, Item Description Model#Manufacturer Telescoping Gage Set, 5/16-6 in.S579HZStarrett, 1, EA; LI 072, Item DescriptionModel#Manufacturer Screw Pitch Gage, 4-84 TPI472Starrett, 1, EA; LI 073, Item DescriptionModel#Manufacturer Alignment Clamp SetS668CZStarrett, 1, EA; LI 074, Item Description Model#Manufacturer Magnetic Indicator Holder W/ Attach659AStarrett, 1, EA; LI 075, Item DescriptionModel#Manufacturer Dial Indicator,0-1 In., 0-50-025-631JStarrett, 1, EA; LI 076, Item DescriptionModel#Manufacturer Machinest Tool Cabinet3611BKennedy, 1, EA; LI 077, Item Description Model#Manufacturer Countersink Drill Bit SetDW2535DeWALT, 1, EA; LI 078, Item Description Model#Manufacturer Tool Post and Holder SetV60TC-CNCDorian, 1, EA; LI 079, Item Description Model#Manufacturer Manhole Lid Lifter, Magnetic9401-26Allegro, 1, EA; LI 080, Item Description Model#Manufacturer Confined Space Air BlowerSVF-10EXPAir Systems, 1, EA; LI 081, Item DescriptionModel#Manufacturer Ventilation DuctSVH-15Air Systems, 1, EA; LI 082, Item DescriptionModel#Manufacturer Jib Crane, AC, 230 VWTJ-20-4-ACVestil, 1, EA; LI 083, Item DescriptionModel#Manufacturer Key DuplicatorBravo IIIKaba Ilco, 1, EA; LI 084, Item DescriptionModel#Manufacturer Key Control Cabinet2NET7Battalion, 1, EA; LI 085, Key Blanks, 100As NeededKaba Ilco, 100, EA; LI 086, Key TagsKaba Ilco, 200, EA; LI 087, Item Description Model#Manufacturer 20'H x 7'L x 5'W Scaffolding PackageST-RU0721ORBil-Jax, 1, EA; LI 088, Item Description Model#Manufacturer Manual Pallate Truck, 8000 Lbs.2ZE60Dayton, 1, EA; LI 089, Item Description Model#Manufacturer Manual Pallate Truck, Measuring Scale2ZE61Dayton, 1, EA; LI 090, Item DescriptionModel#Manufacturer Work Positioner2PLJ1Dayton, 1, EA; LI 091, Item DescriptionModel#Manufacturer Starter Master Set99700PROTO, 3, EA; LI 092, Item DescriptionModel#Manufacturer Rolling Tool Cabinet for Master Set45035PROTO, 3, EA; LI 093, Item Description Model#Manufacturer Add-on Master Set, Metric99570PROTO, 1, EA; LI 094, Item DescriptionModel#Manufacturer Tool Chest for Add-on Metric Set442719-8RDPROTO, 1, EA; LI 095, Item DescriptionModel#Manufacturer Tube Expander KitS/34152RIDGID, 1, EA; LI 096, Item DescriptionModel#Manufacturer Drain Cleaning MachineK-7500RIDGID, 1, EA; LI 097, Item DescriptionModel#Manufacturer Pipe Super Freeze UnitSF-2500RIDGID, 1, EA; LI 098, Item Description Model#Manufacturer Electric Pressure Test Pump1460-ERIDGID, 1, EA; LI 099, Item DescriptionModel#Manufacturer Drain Inspection ToolD65SRIDGID, 1, EA; LI 100, Carpenter Tool Set, 1, EA; LI 101, Item DescriptionModel#Manufacturer Mason's Tool SetBTK1Marshalltown, 1, EA; LI 102, Item Description Model#Manufacturer Woodworkers Measuring and Marking Set303FSKFOOTPRINT TOOLS, 2, EA; LI 103, Item DescriptionModel#Manufacturer Pulley Puller Set1676OTC, 1, EA; LI 104, Item Description Model#Manufacturer Manual Lift, 400 lbs, With LadderGL-8STDGenie, 1, EA; LI 105, Item DescriptionModel#Manufacturer Welder Generator907403Miller, 1, EA; LI 106, Item Description Model#Manufacturer Portable Welder 230 V AC903641Miller, 1, EA; LI 107, Item Description Model#Manufacturer Pressure Washer, Gas EngineGP-4000-4MRBChore Master, 1, EA; LI 108, Item Description Model#Manufacturer General Purpose Hole Saw Kit49-22-4185Milwaukee, 1, EA; LI 109, Item Description Model#Manufacturer Electrician's Hole saw KitAVELE01Morse, 1, EA; LI 110, Item Description Model#Manufacturer Safety Cabinet for Flammables Storage1964Eagle, 1, EA; LI 111, Item DescriptionModel#Manufacturer Pipe Wrench Set 18, 24, 36 Inch818/31100, 824/31105,836/31110, RIDGID, 1, EA; LI 112, Item Description Model#Manufacturer Hand Cutting Torch with Hose0381G1480Victor, 1, EA; LI 113, Item Description Model#Manufacturer Refrigerant Recovery Machine, 2 port4UKW1Dayton, 1, EA; LI 114, Item DescriptionModel#Manufacturer Platform Ladder3WP2424RA3B4B8AC1P6Cotterman, 1, EA; LI 115, Item DescriptionModel#Manufacturer Platform Ladder4WP2424RA3B4B8AC1P6Cotterman, 1, EA; LI 116, Item Description Model#Manufacturer Telescoping Ladder, 13 Ft.10713Little Giant, 2, EA; LI 117, Item Description Model#Manufacturer Telescoping Ladder, 22 Ft.10722Little Giant, 2, EA; LI 118, Item Description Model#Manufacturer Cordless Drain Inspection Camera69635NTRothenberger, 1, EA; LI 119, Item DescriptionModel#Manufacturer Sledge Hammer, 8 Lb.27808Nupla, 1, EA; LI 120, Item DescriptionModel#Manufacturer Sledge Hammer, 4 Lb.27046Nupla, 1, EA; LI 121, Item DescriptionModel#Manufacturer Bolt Cutter, 18 In.1YNB8Westward, 1, EA; LI 122, Item DescriptionModel#Manufacturer Locking Plier Set428GSIrwin Vise Grip, 1, EA; LI 123, Item Description Model#Manufacturer Professional Bench Plane12-905Stanley, 1, EA; LI 124, Item Description Model#Manufacturer Balometer/Flow Hood, DigitalEBT721Alnor, 1, EA; LI 125, Item DescriptionModel#Manufacturer Hood and Frame Kit801206Alnor, 1, EA; LI 126, Item Description Model#Manufacturer Temperature and Humidity Probe800189Alnor, 1, EA; LI 127, Item DescriptionModel#Manufacturer Velocity Matrix Probe801090Alnor, 1, EA; LI 128, Item DescriptionModel#Manufacturer Air Flow Probe 800187Alnor, 1, EA; LI 129, Item DescriptionModel#Manufacturer Anemometer RVA801Alnor, 1, EA; LI 130, Item Description Model#Manufacturer Indoor Air Quality TesterCF930Alnor, 1, EA; LI 131, Item Description Model#Manufacturer Handheld Oscilliscope, USBU1602B-001Agilent Technologies, 1, EA; LI 132, Item Description Model#Manufacturer Digital Hydronic Manometer490-4Dwyer, 1, EA; LI 133, Item DescriptionModel#Manufacturer Backpack Leaf BlowerTBL-7800RTanaka, 1, EA; LI 134, Item DescriptionModel#Manufacturer Gas Line TrimmerTBC-255PFTanaka, 1, EA; LI 135, Item Description Model#Manufacturer Nonconductive Round Point Shovel76225Nupla, 1, EA; LI 136, Item Description Model#Manufacturer Nonconductive Drain Spade76233Nupla, 1, EA; LI 137, Item DescriptionModel#Manufacturer Compressed Air Sprayer6300Chapin, 1, EA; LI 138, Item DescriptionModel#Manufacturer Parts Storage Cabinet10126Akro-Mils, 2, EA; LI 139, Item DescriptionModel#Manufacturer Parts Stroage Cabinet10164Akro-Mils, 2, EA; LI 140, Electric TesterFluke-T+Fluke, 2, EA; LI 141, Item DescriptionModel#Manufacturer HVAC Aviation Snip SetWISET1Wiss, 1, EA; LI 142, Item DescriptionModel#Manufacturer Punch and Chisel Set46Proto, 1, EA; LI 143, Item DescriptionModel#Manufacturer Utility Cart J441000-RDProto, 1, EA; LI 144, Item DescriptionModel#Manufacturer Riubber Mallet, 16 Oz.51-104Stanley, 1, EA; LI 145, Item Description Model#Manufacturer Nail Set, Knurled, 3 Pc.58-230Stanley, 1, EA; LI 146, Item Description Model#Manufacturer General Purpose Broom, 24 In.3PCA8Tough Guy, 3, EA; LI 147, Item DescriptionModel#Manufacturer Lobby Dust Pan 1VAJ6Tough Guy, 2, EA; LI 148, Item DescriptionModel#Manufacturer Lobby Broom 1VAC2Tough Guy, 2, EA; LI 149, Dual Chamber Mop Bucket Kit, 32 Qt.SCFPGUnger, 1, EA; LI 150, Item DescriptionModel#Manufacturer Drywall Appretice KitG16930Goldblatt, 1, EA; LI 151, Item Description Model#Manufacturer Standard test leads set for multimeter3RDY4AGILENT TECHNOLOGIES, 1, EA; LI 152, Item Description Model#Manufacturer Handheld capacitance meter4NRR1AGILENT TECHNOLOGIES, 1, EA; LI 153, Item DescriptionModel#Manufacturer Battery load tester1DGV7OTC, 1, EA; LI 154, Item DescriptionModel#Manufacturer Cable crimping tool1A0763M, 1, EA; LI 155, Item DescriptionModel#Manufacturer Conduit Bender Machine1ATF3GREENLEE, 1, EA; LI 156, Item DescriptionModel#Manufacturer Soldering iron kit6NE58WELLER, 1, EA; LI 157, Item DescriptionModel#Manufacturer Plastic Toolbox 4FB49WESTWARD, 5, EA; LI 158, Item DescriptionModel#Manufacturer Work Box 20.6 1RG78CONTICO, 1, EA; LI 159, Item Description Model#Manufacturer Reporter 8.5 software for thermal scaner3EML2FLIR, 1, EA; LI 160, Item Description Model#Manufacturer Tabbed steel Jaw for lock2CJJ4AMERICAN LOCK, 5, EA; LI 161, Item Description Model#Manufacturer Precision Measuring Tool SetS766BZSTARRET, 1, EA; LI 162, Item DescriptionModel#Manufacturer Long Feeler Gauge Set000TLPROTO, 1, EA; LI 163, Item Description Model#Manufacturer Box Beam Magnetic Spirit Level 48 Inch9548-HHJOHNSON, 3, EA; LI 164, Item Description Model#Manufacturer Box Beam Magnetic Spirit Level 24 Inch9524JOHNSON, 3, EA; LI 165, Item Description Model#Manufacturer Magnetic Torpedo Level 12 Inch1415-1200JOHNSON, 3, EA; LI 166, Item DescriptionModel#Manufacturer Long Measuring Tape SetNR-60MKESON, 1, EA; LI 167, Item DescriptionModel#Manufacturer Laser Distance MeterD330LEICA DISTO, 1, EA; LI 168, Item DescriptionModel#Manufacturer Rotary Laser Level40-6543JOHNSON, 1, EA; LI 169, packing and Shipment to: Crating and Container International1200 Fuller Road Linden, NJ 07036, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If Seller is bidding Cisco brand equipment, Seller certifies that it is a Cisco Authorized Channel as of the date of the submission of its Bid, and that it has the certification/specialization level required by Cisco to support both the product sale and product pricing, in accordance with applicable Cisco certification/specialization requirements.Unless otherwise specified, Seller warrants that the products are new and in their original box(es). The Seller confirms to have sourced all Cisco products submitted in this Bid from Cisco or through Cisco Authorized Channels only, in accordance with all applicable laws and Ciscos current applicable policies at the time of purchase. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all Cisco software is licensed originally to Buyer as the original licensee authorized to use the Cisco Software. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. Agencies may require registration with the Central Contractor Registry (CCR) prior to receipt of order, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.ccr.gov All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturers warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturers current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software.All electrical Equipments must be 220 V. please see last line item (a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the Federal Desktop Core Configuration (FDCC). This includes Internet Explorer 7 configured to operate on Windows XP and Vista (in Protected Mode on Vista). For the Windows XP settings, see http://csrc.nist.gov/itsec/guidance_WinXP.html and for the Windows Vista settings, see: http://csrc.nist.gov/itsec/guidance_vista.html.(b) The standard installation, operation, maintenance, update, and/or patching of software shall not alter the configuration settings from the approved FDCC configuration. The information technology should also use the Windows Installer Service for installation to the default program files directory and should be able to silently install and uninstall.(c) Applications designed for normal end users shall run in the standard user context without elevated system administration privileges.(d) The Department of State currently intends to use Vista in Protected Mode in the future when all devices at all worldwide locations have sufficient capacity to permit an upgrade from the XP operating system. Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that will supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA. An article is considered a product of a country only if it is wholly a product of that country or if it has been substantially transformed in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered substantially transformed based solely on its integration into IT or other systems The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/FedBid.com/FedBid1/PR/listing.html)
- Place of Performance
- Address: Multiple shipping information.
- Zip Code: Multiple
- Zip Code: Multiple
- Record
- SN02428600-W 20110421/110419235444-f76ed1c0830c8d0167ab4d51b052ec4c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |