SOLICITATION NOTICE
45 -- BOWL, WATER CLOSET
- Notice Date
- 3/10/2011
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332913
— Plumbing Fixture Fitting and Trim Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Construction & Equipment, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPM8E311R0003
- Archive Date
- 4/29/2011
- Point of Contact
- Madelyn V. Jones, Phone: 2157373553, David H Katz, Phone: 215-737-8636
- E-Mail Address
-
Madelyn.V.Jones@dla.mil, David.Katz@dla.mil
(Madelyn.V.Jones@dla.mil, David.Katz@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- ITEM DESCRIPTION FOR PR: 0025278822 NSN: 4510-00-540-1711 BOWL, WATER CLOSET NAVAL SEA SYSTEMS COMMAND (53711) SUPPLY FITTINGS, WASTE OUTLET FITTINGS AND SHOCK MOUNTS SHALL BE FURNISHED WITH EACH WATER CLOSET, ALL METAL PARTS SHALL BE NON-MAGNETIC. PLEASE NOTE PACKAGING INSTRUCTIONS: *** VITREOUS CHINA *** PACKAGING REQUIREMENTS EACH ITEM SHALL BE PLACED IN A RECTANGULAR DOUBLE WALL CORRUGATED FIBERBOARD BOX (C-FLUTE) WITH 4 INCH THICK CUSHIONING MADE OF FLEXIBLE POLYURETHANE OR POLYSTYRENE FOAM DIE-CUT AS CORNER PADS TO PREVENT DAMAGE DURING SHIPMENT AND STORAGE. EACH BOX SHALL BE MARKED "FRAGILE-GLASS-DO NOT DROP." IDENTIFY TO: MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY CRITICAL ITEM - SOURCE INSPECTION REQUIRED. THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. CRITICAL APPLICATION ITEM I/A/W DRAWING NR 53711 1385705 BASIC AMEND NR G TYPE NUMBER P/N 1385705 I/A/W DRAWING NR 80064 1385706 REFNO AMEND NR B DTD 10/14/69 TYPE NUMBER I/A/W DRAWING NR 80064 1385832 REFNO AMEND NR H TYPE NUMBER PRLI 0001 1000 EA PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = XX: WRAP MAT = JA: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = R: UNIT CONT = E8: OPI = O: INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA: PACK CODE = U: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: 07 - PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED 08183 SUPPLEMENTAL INSTRUCTIONS. For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence. PARCEL POST/FREIGHT ADDRESS: W25G1U W1BG DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US MARK-FOR ADDRESS: W25G1U W1BG DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-I/SPM8E311R0003/listing.html)
- Record
- SN02397658-W 20110312/110310234303-f3e2552ca25d4757e90f3906bde01ee6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |