MODIFICATION
39 -- Racks, Fencing, Personnel Lockers
- Notice Date
- 2/22/2011
- Notice Type
- Modification/Amendment
- NAICS
- 493110
— General Warehousing and Storage
- Contracting Office
- Defense Information Systems Agency, Procurement Directorate, DITCO-NCR, P.O. 4502, Arlington, Virginia, 22204-4502, United States
- ZIP Code
- 22204-4502
- Solicitation Number
- DMPMC13088(1)
- Archive Date
- 3/14/2012
- Point of Contact
- Patricia Bruce, Phone: 3016776086, Elaina Barker, Phone: 3016775233
- E-Mail Address
-
patricia.bruce@disa.mil, elaina.barker@disa.mil
(patricia.bruce@disa.mil, elaina.barker@disa.mil)
- Small Business Set-Aside
- N/A
- Description
- The following answers are posted in response to questions received as of 15 February, 2011 Answers to Questions MP13088-2 Q. The RFQ does not mention 8A participation and would not give any value to the bid unless it called out 8A in the evaluation section as I understand things. You indicated that 8A was desirable. Will it become part of the evaluation? A. This solicitation is posted as "full and open" and that is how it will be throughout the procurement process. Q What is the clearance of the ceiling above the rack that will be enclosed by wire? Can we install wire at 28'6"H? A. Rack height is 22' Q. As an option, can we omit the ceiling over the wire enclosure around the 10 bays? There would be side panels extending up to 28'6" on all four sides. A. No the secure cage must be closed in completely. Q. Are the work crew members required to be citizens? A: Employees will be required to be cleared for bldg entrance Q. Can the fence run with the gates be 14' tall which is very close to the ceiling in the walkway? A: Yes Q. Will the complete area be clear of any other storage or trade work when the material installation starts. This includes both sides of the long fence run to facilitate installation. On the outside of the long fence run only 5' to 6' of space is needed. A: Yes Q. The original request calls for a 4 week completion from the issue date. It will take over a week to get approval drawings for the fence, 4-5 weeks to get the fence material, up to 6-7 weeks to get the rack material and 4-5 weeks to get the locker material. This does not include erection time. A: This date can be re-adjusted Q. Will the area outside of the loading dock be available to store material if the area inside is not clear? A: floor space will be cleared prior to any work being started Q. What is the size of the locker requested? A: 18"w x 21"d x 72"h Q. Will the award date of March 15 be held? If not what is a firm issue date. A: As of today, the award date is anticipated as March 15 th. The date may be adjusted if necessary. 1. Does racking need to be seismic compliant? A: No 2. Is there a specific color racking desired? A: No 3. For the fencing, is galvanized or coated preferred? A: Galvanized 4. Are we supplying safety bars or grates for the pallet levels? A: No 5. Are pallet stops needed? A: Yes 6. When will the project start? A: Work to commence @ 30 days After receipt of order/contract (ARO) 7. What will the lead time between date of award and date of installation beginning? A: See # 6 8. Will there be an architectural diagram/floor plan for fencing and racking layout? A: Plan for layout submitted with SOW 9. Can we have an open top delivered to dispose of debris? A: Yes, will need to know in advance to clear with facilities/security 10. Are there any special considerations for set aside for this contract? A: No 11. What type of permits are required? A: This answer is forthcoming 12. Is a General Contractor's License required? A: This answer is forthcoming 13. Are there any wage determinations in effect for this contract? A: No 14. Do we need to provide certified plans? A: No 15. Is any bonding required? A: No 16. Are there any special requirements for access onto the base for the truck drivers? A: Security personnel will inspect all trucks entering the compound or delivering equipment to be used during a project. Additional security measures could be excercised at the discretion of the Fort Meade security personnel at Fort Meade military installation prior to entering the compound. 17. Will contractor representative be required to be on site to receive deliveries? A: Yes 18. What is the desired material for the personnel lockers? A: Doors made from heavy 14 gauge steel, sides, tops, bottoms and shelves 16 gauge steel, backs are 18 gauge. Doors and sides perforated with a diamond shaped platform. 19. To clarify, 2" square posts are desired for the fencing, with a desired height of 28'2"? A: run with double gate is 14' - 0", 113" ft run will be 20' 20. For the fencing, how are posts to be set? Plated or core drilled to the floor? A: plated 21. Will diagram/specs be provided for the measurements of fencing that will enclose the heating return pipes? A: Diagram provided w/statement of work, heating pipes cannot be enclosed (fill in), fence will just prevent other tenant from entering area 22. The floor plan shows the word "fence line" on 3 sides. But are there actually two (2) 113' long runs with one that starts out at 24' high and ends up at 28'-2" high? A: 2 sides, 20"H, with adjustment at the end of long run for pipe area 23. Is each run un-encumbered without any objects that need to be adjusted around? A: Will be required to insure that the eye wash machine is on the inside of the enclosed area 24. Will the racks where the double gate goes be separated so that the 28'2" high line can be installed the full 20'6" width? A: Unclear of what is being asked, please restate the question. The following contractors attended the site visit on 15 February, 2011 J. Yochelson Advanced Equipment Company 301-336-0200 T. Pelloni Werres Corporation 240-674-6396 C. Hinshaw Metro Shelving & Warehouse Prod. 301-682-6797 B. Abraham The BeamTeam, Inc 469-826-3471
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DISA/D4AD/DTN/DMPMC13088(1) /listing.html)
- Record
- SN02384683-W 20110224/110222234121-9d4659e8a8c0f6ddf3167d8a775e56a2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |