SOLICITATION NOTICE
J -- DRYDOCK AND REPAIR USCGC DECISIVE
- Notice Date
- 12/29/2010
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG8011QP45C39
- Archive Date
- 3/1/2011
- Point of Contact
- FREDRICK BARAT BAECHLE, Phone: 757-628-4652, Beverly A Garner, Phone: (757) 628-4663
- E-Mail Address
-
FREDRICK.B.BAECHLE@USCG.MIL, Beverly.A.Garner@uscg.mil
(FREDRICK.B.BAECHLE@USCG.MIL, Beverly.A.Garner@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The U.S. Coast Guard intends to issue a Commercial Request for Quote (RFQ) for Dry Dock repairs to the USCGC DECISIVE (WMEC-629), A 210 foot "B" class medium endurance cutter. The homeport of the vessel is Pascagoula, Mississippi. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about January 14, 2011. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SET-ASIDE FOR SMALL BUSINESS CONCERNS. The performance period is sixty (60) calendar days and is expected to begin on or about 04 MAY 2011 and end on or about 29 June 2011. The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC DECISIVE (WMEC-629) The scope of the acquisition is for the following aboard the USCGC DECISIVE (WMEC-629): 1-D Hull Plating (Side Scan), Ultrasonic Testing 2-D Appendages (U/W), Leak Test 3-D Propulsion Shaft Fairwaters and Rope Guards, Inspect 4-D Appendages (U/W) - Internal, Preserve 5-D Tanks (MP Fuel Service), Clean and Inspect 6-D Tanks (MP Fuel Stowage and Overflow), Clean and Inspect 7-D Tanks (Potable Water), Preserve 100% 8-D Voids (Accessible), Clean and Inspect 9-D Tanks (Dirty Oil and Waste), Clean and Inspect 10-D Propulsion Shafting, Renew 11-D Propeller Shaft Sleeve(s), Renew 12-D Propulsion Shaft Bearings (External), Renew 13-D Propulsion Stern Tube Bearings, Renew 14-D CPP System, General Maintenance 15-D Controllable Pitch Propeller Hub Assembly, General Maintenance 16-D Main Diesel Engine (MDE) Exhaust Stack Uptakes, Clean 17-D Ship Service Diesel Generator (SSDG) Exhaust Piping, Clean 18-D Boiler Exhaust Stack Uptakes, Clean 19-D Fathometer Transducer, Renew 20-D Doppler Speed Log Transducer(s), Renew 21-D Vent Ducts (Engine and Motor Room All), Commercial Cleaning 22-D Vent Ducts (Galley and Pantry Room All), Commercial Cleaning 23-D Vent Ducts (Laundry Exhaust), Commercial Cleaning 24-D Strainers - Duplex (All Sizes), Overhaul 25-D Rudder Assembly, Remove, Inspect and Reinstall 26-D U/W Body, Preserve ( "100%" ) 27-D Stern Tube Interior Surfaces, Preserve 100% 28-D Drydocking 29-D Temporary Services 30-D Upgrade Single Point Davit Control Console 31-D Sea Valves and Waster Pieces, Overhaul or Renew 32-D Propulsion Shaft Seals, Overhaul 33-D Anchor Windlass Foundations, Renew 34-D Box Beam, Repair 35-D Oily Wtr Holding Tank & Oily Wtr Seperator Suction Piping, Renew 36-D Fuel Oil Piping, Renew 37-D Interior Bilge, Preserve 38-D Deck Plating, Renew 39-D Hull Plating, Renew 40-D Chain Locker, Preserve 100% A-O Composite Labor Rate B-D GFP Report - NSP Z-O Laydays All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. MLCA must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above. Quotes are due on or about February 14, 2011, 200 pm Eastern Standard Time to: Commander (SFLC ) CPD-C&P1-MECPL, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Requests for Quotations and additional information requests may be faxed to (757) 628-4676 Attn: Fredrick (Barat) Baechle.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG8011QP45C39/listing.html)
- Record
- SN02352009-W 20101231/101229233813-1ceadd43c01be5eda107a74268d31f50 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |