SOLICITATION NOTICE
25 -- Parts Kit, Service AO MTV
- Notice Date
- 12/3/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336992
— Military Armored Vehicle, Tank, and Tank Component Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L3-11-Q-0218
- Archive Date
- 12/31/2010
- Point of Contact
- Karin M. Wilson, Phone: 6146923609, Richard J Matz, Phone: 614-692-8148
- E-Mail Address
-
karin.wilson@dla.mil, richard.matz@dla.mil
(karin.wilson@dla.mil, richard.matz@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- ITEM DESCRIPTION FOR PR: 0028843945 PARTS KIT, SERVICE AO MTV SUPPLIER SHALL ENSURE THAT ALL PARTS WILL HAVE TRACEABILITY BACK TO AUTHORIZED SUPPLIERS SHOWN ON KIT DRAWING. EXCEPTION TO DRAWING:WHEN PROVIDING A GIVEN NSN,WEBFLIS APPROVED CAGE AND P/N'S WITH RNCC-RNVC OF 2-2,3-2, AND 5-2 MAY BE USED. RNCC-RNVC CODES 3-9 AND 5-9 MAY NOT USED AND ARE CONSIDERED OBSOLETE. FAT TESTING REQUIRED FOR PART NUMBER 12418424 NSN 5310-01-454-5553. EATON CORP 52304 IS WAIVED,ALSO PINE AUTOMOTIVE 3B0Y2 IS WAIVED, HUPP AEROSPACE/DEFENSE 0JT27 IS WAIVED. NOTES: EXCEPTION TO DRAWING, PARTS SHOWING SUPPLIER AXLE TECH MAY ALSO BE PROCURED FROM ARVIN MERITOR WITH PROPER TRACEABILITY. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. KIT QUALITY PROVISION. 1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED TO THE GOVERNMENT AS A KIT. 2. THE CONTRACTOR SHALL COMPLY WITH ALL APPLICABLE QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS FOR THE KIT COMPONENTS BEING SUPPLIED. 3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR OBTAINING, HANDLING AND SUPPLYING ORIGINAL EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH ITS VENDORS. 4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT DAMAGED. 5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR PROCESS THAT WILL ENSURE TRACEABILITY OF ALL PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE MANUFACTURER. 6. THE CONTRACTOR'S INSPECTION SYSTEM AND PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE REQUEST OF THE CONTRACTING OFFICER. 7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS THAT ARE KNOWN TO BE ACCEPTABLE TO THE GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS REFLECTED IN THE GOVERNMENT'S CONTRACT TECHNICAL DATA FILE (CTDF). 8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY ONLY NEW AND UNUSED PARTS THAT ARE NOT GOVERNMENT SURPLUS PARTS. "FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE." FULL AND OPEN COMPETITION APPLY I/A/W QAP 14153 QAP-EQ001 REFNO AMEND NR B DTD 02/13/96 TYPE NUMBER I/A/W QAP 14153 QAP-EQ002 REFNO AMEND NR A DTD 03/10/03 TYPE NUMBER I/A/W DRAWING NR 19207 12418424 REFNO AMEND NR B DTD 03/23/06 TYPE NUMBER I/A/W DRAWING NR 19207 57K4845 BASIC AMEND NR A DTD 09/19/05 TYPE NUMBER 57K4845-005 PRLI 0001 63 KT 63 PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP = 001: PRES MTHD = ZZ: CLNG/DRY = X: PRESV MAT = XX: WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X: UNIT CONT = XX: OPI = O: INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX: PACK CODE = U: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: 00 - 00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED 08183 SUPPLEMENTAL INSTRUCTIONS. For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence. PARCEL POST ADDRESS: W62G2T W1BG DEF DIST DEPOT SAN JOAQUN TRANSPORTATION OFFICER PO BOX 960001 STOCKTON CA 95296-0130 US FREIGHT SHIPPING ADDRESS: W62G2T W1BG DEF DIST DEPOT SAN JOAQUN 25600 S CHRISMAN ROAD REC WHSE 16B PH 209 839 4307 TRACY CA 95304-5000 US MARK-FOR ADDRESS: W62G2T W1BG DEF DIST DEPOT SAN JOAQUN 25600 S CHRISMAN ROAD REC WHSE 16B PH 209 839 4307 TRACY CA 95304-5000 US NON-MILSTRIP RDD 07/05/11 PROJ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * PRLI 0002 179 KT 179 PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP = 001: PRES MTHD = ZZ: CLNG/DRY = X: PRESV MAT = XX: WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X: UNIT CONT = XX: OPI = O: INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX: PACK CODE = U: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: 00 - 00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED 08183 SUPPLEMENTAL INSTRUCTIONS. For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence. PARCEL POST/FREIGHT ADDRESS: W25G1U W1BG DEF DIST DEPOT SUSQUE DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US MARK-FOR ADDRESS: W25G1U W1BG DEF DIST DEPOT SUSQUE DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US NON-MILSTRIP RDD 07/05/11 PROJ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L3-11-Q-0218/listing.html)
- Record
- SN02338318-W 20101205/101203234149-d2ed32977f70622025e85c68cec5f69d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |