Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF OCTOBER 29, 2010 FBO #3261
SOURCES SOUGHT

66 -- Atomic Hydrogen Source, Thermocouple & PID Controller

Notice Date
10/27/2010
 
Notice Type
Sources Sought
 
NAICS
334516 — Analytical Laboratory Instrument Manufacturing
 
Contracting Office
Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
 
ZIP Code
94303
 
Solicitation Number
159448
 
Archive Date
11/23/2010
 
Point of Contact
Pamela Wright-Brunache, Phone: 6509262440
 
E-Mail Address
pdwb@slac.stanford.edu
(pdwb@slac.stanford.edu)
 
Small Business Set-Aside
Total Small Business
 
Description
tectra GmbH (mfg) If offering direct equivalent, must provides specs. 1ea #H-flux Atomic Hydrogen Source Produces activated gas species by thermal decomposition/activation on an electron-bombardment-heated Tungsten capillary tube. Supplied complete with power supply and cables. Source: 1 Electron bombardment heating allowing smallest spot heating to minimize heat load 2 Tungsten capillary tube with only 500μm inner diameter to achieve highest possible cracking efficiency of up to 100% 3 HV connection via over-specified high voltage feedthrough with matching connector for high-level user safety. 4 All feedthroughs are user demountable for on-site service/repair. 5 Filaments are easily replaced and user fabricated from 0.3mm tungsten wire of near zero running costs 6 Water-cooled copper jacket to minimize radiated heat and outgassing. Water connection via 1/4" Swagelok fittings. 7 Gas connection via mini-Conflat (NW16CF) flange. 8 Additional spare NW 16CF port on the multiport for future upgrade with the options listed below Gas: H2 only Cracking zone: Tungsten capillary tube with inner-Ø 500μm Heating principle: electron bombardment Cracking temperature: typically 1.800°-2.000°C (>3.000°C possible) Cracking efficiency: up to 99,9% at temp >1.800°C and <10-8mbar In vacuum length: 195mm (standard, other length on request) In vacuum diameter: 34mm (max) Mounting Flange: NW35CF (2.75") Leak valve: required (see option) Integral cooling: Water Bakeable: 200°C Power Supply: High Voltage: 1,2kV (max) adjustable Beam current: 50mA (max) adjustable Power: 60W (max) adjustable via voltage and current Case: 19" rack mounting unit, 3U height, 230VAC 1ea #TCPID Thermocouple & PID Controller, includes thermocouple, feedthrough, cable & PID controller 1ea #MOS Manually Operated Shutter, includes shutter mechanism & rotary feedthrough
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/159448/listing.html)
 
Place of Performance
Address: SLAC, 2575 Sand Hill Rd., Menlo Park, California, 94025, United States
Zip Code: 94025
 
Record
SN02317394-W 20101029/101027233904-e3302f5c4cb09622148ab5c084cdbf26 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.