SOLICITATION NOTICE
70 -- EDU Storage Replenishment
- Notice Date
- 8/30/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 423430
— Computer and Computer Peripheral Equipment and Software Merchant Wholesalers
- Contracting Office
- Department of the Air Force, Direct Reporting Units, USAF Academy - 10 CONS, 8110 Industrial Drive, Suite 200, USAF Academy, Colorado, 80840-2315, United States
- ZIP Code
- 80840-2315
- Solicitation Number
- EDUStorageReplenishment
- Archive Date
- 9/18/2010
- Point of Contact
- Karen L Jackson, Phone: 719-333-4060, Nicole Baert, Phone: 7193338924
- E-Mail Address
-
karen.jackson@usafa.af.mil, nicole.baert@usafa.af.mil
(karen.jackson@usafa.af.mil, nicole.baert@usafa.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ), solicitation number FA7000-10-T-0089, in accordance with FAR Parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-43, 2 August 2010. The North American Industry Classification System Code [NAICS] is 423430 and the size standard is 100 employees. This is a 100% Small Business Set Aside acquisition. All responsible sources may submit a quote, which if received timely, will be considered by the 10th Contracting Squadron, USAF Academy (USAFA). Please read and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this combined synopsis/solicitation could result in the quote being ineligible for award. It is the offeror's responsibility to ensure their quote meets all the requirements identified herein. The USAF Academy has a Brand Name Only requirement to purchase Hewlett Packard Storage Replenishment for the EDU Network, further described below. REQUIREMENTS FOR QUOTE Prices quoted must be Firm-Fixed Price to include shipping and handling charges based on F.O.B Destination. Item Unique Identification (IUID) applies to this acquisition (see DFARS clause 252.211-7003 below) Provide pricing for each of the following line items: Description Qty Unit Price Extended Price LINE ITEM 0001 HP P4500 G2 60TB MDL SAS Scale 1 $___________ $_____________ CAP SAN (Part # BK717A) Item Unique Identifier (IUID) 1 $___________ $______________ Marking LINE ITEM 0002 HP 3Y Support Plus 24 Svc P4500 1 $____________ $______________ G2 Scalable Sol. Support (Part # HA110A3-1N6) LINE ITEM 0003 HP P4300 G2 16TB MDL SAS Starter 1 $_____________ $_____________ SAN (Part # BK715A) Item Unique Identifier (IUID) 1 $_____________ $_____________ Marking LINE ITEM 0004 HP 3Y Support Plus 24 Svc LHN 1 $_____________ $_____________ P4300 SAN Solution Support (Part # HA110A3-1N5) LINE ITEM 0005 HP P4500 G2 21.6TB SAS Multi-Site 1 $_____________ $_____________ SAN (Part # AX697A) Item Unique Identifier (IUID) 1 $_____________ $____________ Marking LINE ITEM 0006 HP 3Y Support Plus 24 Svc LH Multi- 1 $____________ $____________ Site Soln JW Support (Part # HA110A3-8W8) LINE ITEM 0007 HP StorageWorks P4000 Unified NAS 2 $_____________ $____________ Gateway for CIFS/NFS Functionality (Part # AW 589A) Item Unique Identifier (IUID) Marking 2 $_____________ $___________ LINE ITEM 0008 PROF-SVC-HP/LHN Installation 2 $______________ $___________ (Part # PROF-SVC) TOTAL PRICE $ _______________________ The following Federal Acquisition Regulation (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items, addenda applies: The contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, DUNS number, tax identification number, size of business, and warranty information. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. The provision at FAR 52.212-3 Alt I, Offeror Representations and Certifications - Commercial Items, must be completed. Offerors are highly encouraged to complete all representations and certifications electronically on line at (http://orca.bpn.gov/publicsearch.aspx). If not completed on-line, 52.212-3 Alt I shall be completed in hard copy and submitted with quote. In accordance with FAR 52.212-4(t), Central Contractor Registration (CCR) contractors must be registered with CCR to conduct business with the Department of Defense. No purchase order can be awarded to any company without this registration. (www.ccr.gov) Quotes must be received no later than 12:00 pm Mountain Standard Time (MST), 3 September 2010 at 10 CONS/ LGCB, Attn: Karen Jackson, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. Quotes may also be submitted by e-mail to the Primary POC or by fax to 719-333-9103. Questions and responses should be addressed to the Primary POC Karen Jackson, Contract Specialist, USAF Academy (719) 333-4060, karen.jackson@usafa.af.mil. Alternate POC is Nicole Baert, Contracting Officer, (719) 333-8924, nicole.baert@usafa.af.mil. Offers received after this date and time will be considered late in accordance with 52.212-1(f) and may not be evaluated. The provision at FAR 52.212-2, Evaluation--Commercial Items apply to this acquisition. The Government will award a contract resulting from this solicitation to the responsive responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate offers: Offeror must identify how they intend to comply with the IUID requirement, i.e., what method of marking will be used. Award will be made on the basis of determining the acceptable offer with the lowest evaluated price which meets or exceeds the requirements. Once an offer has been determined to be acceptable then the Offeror with the lowest evaluated price will be awarded the contract. If an offer is not acceptable it will not be considered; this includes failure to comply with IUID requirement. The following clauses apply to this acquisition. The clause at FAR 52.212-4, Contract Terms and Conditions--Commercial Items, with the following addenda, applies: Addendum to FAR 52.212-4(c) Changes Text in paragraph (c) is deleted and replaced with the following: Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer (for a complete list of changes that may be made unilaterally, see FAR 43.103(b)) (End of Addendum) FAR 52.252-2 Clauses Incorporated by Reference: This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) applies to this acquisition. Additional FAR clauses cited in the clause applicable to this acquisition are: 52.203-3 Gratuities (Apr 1984) 52.203-6 Alt I Restrictions on Subcontractor Sales to the Government (Oct 1995) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) 52.219-6 Notice of Total Small Business Set-aside (Jun 2003) 52.219-8 Utilization of Small Business Concerns (May 2004) 52.219-14 Limitations on Subcontracting (Dec 1996) 52.219-28 Post-Award Small Business Program Representation (Apr 2009) 52.222-3 Convict Labor (Jun 2003) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (Jul 2010) 52.222-21 Prohibition of Segregated Facilities (Feb 1999) 52.222-26 Equal Opportunity (Mar 2007) 52.222-35 Equal Opportunity for Special Disabled veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006) 52.222-36 Affirmative Action for Workers with Disabilities (Jun 1998) 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006) 52.222-99 Dev Notification of Employee Rights Under the National Labor Relations Act (Jun 2010) 52.222-50 Combating Trafficking in Persons (Feb 2009) 52.223-15 Energy Efficiency in Energy -Consuming Products (Dec 2007) 52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008) 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration (Oct 2003) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 252.225-7012 Preference for Certain Domestic Commodities (Jun 2010) 252.243-7002 Requests for Equitable Adjustment (Mar 1998) 252.247-7023 Transportation of Supplies by Sea (May 2002) FAR Clause 52.252-6, Authorized Deviations in Clauses (Apr 1984) applies and is stated as follows: (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of Clause) DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items (Jun 2005) applies to this acquisition. a) Definitions. As used in this clause- (1) "Foreign person" means any person other than a United States person as defined in Section 16(2) of the Export Administration Act of 1979 (50 U.S.C. App. Sec. 2415). (2) "United States" means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331. (3) "United States person" is defined in Section 16(2) of the Export Administration Act of 1979 and means any United States resident or national (other than an individual resident outside the United States and employed by other than a United States person), any domestic concern (including any permanent domestic establishment of any foreign concern), and any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern which is controlled in fact by such domestic concern, as determined under regulations of the President. (b) Certification. By submitting this offer, the Offeror, if a foreign person, company or entity, certifies that it- (1) Does not comply with the Secondary Arab Boycott of Israel; and (2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. Sec. 2407(a) prohibits a United States person from taking. (c) Representation of Extent of Transportation by Sea. (This representation does not apply to solicitations for the direct purchase of ocean transportation services). (1) The Offeror shall indicate by checking the appropriate blank in paragraph (c)(2) of this provision whether transportation of supplies by sea is anticipated under the resultant contract. The term "supplies" is defined in the Transportation of Supplies by Sea clause of this solicitation. (2) Representation. The Offeror represents that it- ___________Does anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. ___________Does not anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. (3) Any contract resulting from this solicitation will include the Transportation of Supplies by Sea clause. If the Offeror represents that it will not use ocean transportation, the resulting contract will also include the Defense Federal Acquisition Regulation Supplement clause at 252.247-7024, Notification of Transportation of Supplies by Sea. (End of provision) DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes of Executive Orders Applicable to Defense Acquisitions of Commercial Items (Jun 2010) applies to this acquisition. Additional DFARS clauses cited in the clause applicable to this acquisition are: 252.232-7003, Electronic Submission of Payment Requests (Mar 2008). DFARS 252.211-7003 ITEM IDENTIFICATION AND VALUATION (AUG 2008) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/equivalents.html. "DoD unique item identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a non-repeatable identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, or Defense Logistics Information System (DLIS) Commercial and Government Entity (CAGE) Code). "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number _N/A___. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-(i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) 5352.201-9101 OMBUDSMAN (Apr 2010) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Kim Diercks 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-2074 FAX 719-333-2379 email: kim.diercks@usafa.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) USAFA 5352.242-9000, Contractor Access to Air Force Installations (Aug 2007) applies to this acquisition. (a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. (b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or security police for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and [insert any additional requirements to comply with local security procedures] to obtain a vehicle pass. (c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site. (d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with [insert any additional requirements to comply with AFI 31-101, Volume 1, The Air Force Installation Security Program, and AFI 31-501, Personnel Security Program Management,] citing the appropriate paragraphs as applicable. (e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (f) Failure to comply with these requirements may result in withholding of final payment. (End of clause) ADDENDUM - USAF Academy Invoicing Instruction (Revised 4/23/08) a. In accordance with DFARS 252-232-7003, Electronic Submission of Payment Requests, the contractor shall submit payment (invoice) requests through the Wide Area Workflow (WAWF) System. For information on WAWF, including how to register, visit the WAWF website at https://wawf.eb.mil. Web Based Training (WBT) is available at http://www/wawftraining.com. If you need any further assistance you can contact the Contract Specialist or Contracting Officer whose name appears on the contract. b. The address and DODAAC of the payment office (effective 1 Jun 06) is: Defense Finance and Accounting Service ATTN: DFAS-BAASD/CC P. O. Box 369020 Columbus, OH 43236-9020 ATTN: VENDOR PAY (DODAAC F67100) (End of Addendum)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/DRU/10ABWLGC/EDUStorageReplenishment/listing.html)
- Place of Performance
- Address: USAF Academy, USAFA, Colorado, 80840, United States
- Zip Code: 80840
- Zip Code: 80840
- Record
- SN02260745-W 20100901/100830235553-b864657546ae15bea0fbec85b937b7a1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |