SOLICITATION NOTICE
66 -- Notice of intent to award non-competitive procurement.
- Notice Date
- 8/23/2010
- Notice Type
- Presolicitation
- Contracting Office
- U S GEOLOGICAL SURVEY, APS BRANCH OF ACQUISITION AND GRANTS3020 STATE UNIVERSITY DR. EAST, MODOC HALL STE 2002 SACRAMENTO CA 95819
- ZIP Code
- 95819
- Solicitation Number
- 10WRQQ0297
- Response Due
- 8/31/2010
- Archive Date
- 8/23/2011
- Point of Contact
- JUDY DAVIS CONTRACT SPECIALIST 9162789330 jmdavis@usgs.gov;
- E-Mail Address
-
Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Geological Survey, Nevada Science Center has a requirement for Dataloggers and associated sensors to perform evapotranspiration studies. This equipment will be used to measure and record evapotranspiration data. Following is the required equipment: Campbell Scientific, Inc. 3 each Micrologger, P/N 17852-47; 3 each Compact Flash Module P/N 17345-13; 3 each Weather resistant P/N 15873-55; 2 each Vaisala Temperature RH probe P/N 10856-137; 3 each Hukseflux 4 component net radiation sensor P/N 21267-13; 3 each 1" to 3/4" pipe reducer fitting P/N 21271; 3 each Sensor crossarm w/one CM210 mounting kit P/N 17905; 3 ea LI-COR Quantum sensor P/N 8721-45; 3 eac LI-COR Leveling base P/N 2064; 3 each Solar sensor mounting stand P/N 17906; 2 each Averaging soil TC probe P/N 8731-7; 4 each Stainless steel, 10ft tripod with grounding kit P/N 19021; 4 each Tripod tote for CM110 P/N 19192; 2 each Texas Electronic rain gage P/N 10868-3; 2 each Sensor crossarm w/one CM210 mounting kit P/N 17904; 2 each 3/4 x 1" NURAIL crossover fitting P/N 1049; 2 each 3/4 IPS aluminum pipe P/N 18048; 2 each 47" mounting pole with cap P/N 20570-4; 2 each 23" mounting pole with cap P/N 20569-4; 12 each Grounding spike 1/2" x 16 galvanized steel P/N 17049; 2 each Heat dissipation matric potential sensor P/N 7942-14; 2 each Heat dissipation matric potential sensorP/N 7942-12; 2 each Heat dissipation matric potential sensor P/N 7942-10; 4 each Heat dissipation matric potnetial sensor P/N 7942-9; 14 each Heat dissipation matric potential P/N 7942-2; 14 each Water content reflectometer P/N 13932-5; 1 each PocketPC datalogger P/N 16471; 1 each CRBasic extended Eddy covariance program P/N 18443; 1 each Pressure transducer P/N 21880-236; 1 each CS450 or CS455 Weighted nose cone P/N 25414; 1 each Pressure transducer P/N 21880-237; 1 each CS450 or CS455 Weighted nose cone P/N 25414; 1 each Measurement & control datalogger P/N 16130-23; 2 each Split mesh cable grip P/N 25431; 2 each Replacement desiccant tube P/N 25366; and 1 each Weighted nose cone P/N 25414. Campbell Scientific, Inc., Logan, UT is, to the USGS' knowledge, the only known source who can provide the required equipment. Their datalogger has the unique capabilities of measuring and recording data at a rate of 10 times per second. This fast rate of data acquisition is required to measure evapotranspiration related parameters. It also has the unique capabilities of storing the large amount of data acquired internally for long periods of time between data collection trips. Campbell Scientifics software engineers provide the program needed that tells the micrologger which sensors are connected, which environmental parameters to record, and how these parameters will be statistically analyzed. Therefore, the government intends to award this requirement non-competitively in accordance with FAR 13.106-1(b) (1) and FAR Part 12 to Campbell Scientific. Other interested concerns having the ability to meet the USGS requirement may submit a capabilities statement to the Contracting Officer no later than the closing date of this announcement at 16:00 local time. All submissions will be evaluated to determine if competitive opportunities exist. If no competitive opportunities exist, request for quotation (RFQ) 10WRQQ0297 will be made available to Campbell Scientific on or about 31 Aug 2010. This notice and any resulting quotation or purchase order conforms to the requirements in place through FAC 2005-43, effective 02 Aug 2010. NAICS 334513 Instruments and related products manufacturing for measuring, displaying, and controlling industrial process variables, for which the associated size standard is 500 employees.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/USGS/USGS/10WRQQ0297/listing.html)
- Record
- SN02251641-W 20100825/100823235632-702970dfc21ade788ff92da50b935c70 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |