SOLICITATION NOTICE
47 -- Fabricated Steel and Aluminum rods
- Notice Date
- 8/10/2010
- Notice Type
- Presolicitation
- Contracting Office
- U S GEOLOGICAL SURVEY, APS BRANCH OF ACQUISITION AND GRANTS3020 STATE UNIVERSITY DR. EAST, MODOC HALL STE 2002 SACRAMENTO CA 95819
- ZIP Code
- 95819
- Solicitation Number
- 10WRQQ0283
- Response Due
- 8/19/2010
- Archive Date
- 8/10/2011
- Point of Contact
- GERALD LEWANDOWSKI CONTRACT SPECIALIST 9162789340 ;
- E-Mail Address
-
Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
- Small Business Set-Aside
- Total Small Business
- Description
- The U.S. Geological Survey (USGS), located in Henderson, Nv, has a requirement for 20' (foot) rods made of Aluminum and Steel. Ten (10) rods shall be made from Aluminum and Fourty (40) rods shall be made of Steel in accordance to the below specifications. SPECIFICATIONS ARE FOR BOTH TYPES OF METAL:4.5" OD X 20' long drill rod, 3 1/2" IF threads Wrench flats on box end. Flats shall be from 5" to 9" starting from the top of the rod (box end). The width will be 3.5" (Wrench ID).Tool joint OD is 4.75" and body is 4.5" Material will be shipped to Henderson, Nv 89074. Address will be provided upon award. The Government intends to award this requirement in accordance with the procedures of FAR Part 12, entitled, "Acquisition of Commercial Items." The Request for Quote (RFQ), number 10WRQQ0283 will be made available through the Government-wide Point of Entry (GPE) on or about 12 August 2010, in accordance with Federal Acquisition Regulations (FAR) 5.102(a)(1). All firms must be registered in the Central Contractor Registration (CCR) database at www.ccr.gov, as well as, the Online Representations and Certifications Application (ORCA) at https://orca.bpn.gov/ to be considered for award. Responses must be in writing, by e-mail to the Contract Specialist at glewandor@usgs.gov. This notice and any resulting solicitation or contract conforms to the requirements in place through FAC 2005-42, Effective 16 July 2010. NAICS - 332996, Fabricated Pipe and Pipe Fitting Manufacturing.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/USGS/USGS/10WRQQ0283/listing.html)
- Record
- SN02234797-W 20100812/100810235237-72b7660d5b38661bf8f65a050b13829f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |