SOLICITATION NOTICE
81 -- VARIOUS SIZES AND STYLES OF DOMESTIC SINGLE AND DOUBLE WALL CORRUGATED FIBERBOARD SHIPPING BOXES FOR DLA DISTRIBUTION SUSQUEHANNA, NEW CUMBERLAND, PA
- Notice Date
- 8/5/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 322211
— Corrugated and Solid Fiber Box Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Distribution, J Avenue, DDC J7-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
- ZIP Code
- 17070-5001
- Solicitation Number
- SP3300-10-Q-0191
- Archive Date
- 8/31/2010
- Point of Contact
- Julie A Metzger, Phone: 717 770-6243
- E-Mail Address
-
julie.metzger@dla.mil
(julie.metzger@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- DLA Distribution Susquehanna, New Cumberland, PA has a requirement for various sizes and styles of domestic single wall and double wall corrugated fiberboard shipping boxes. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in conjunction with 13 of the Federal Acquisition Regulations (FAR) as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP3300-10-Q-0191 This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-43 effective 02 Aug 2010 and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20100713 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2010-27, 28, 30 & 36. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. This acquisition is 100% set-aside for small business concerns. The NAICS code applicable to this acquisition is 322211 and the small business size standard is 500 employees. NOTE: This solicitation is being issued as a small business set-aside. Therefore any concern proposing to furnish a product that it did not itself manufacture must furnish the product of a small business manufacturer. The requirement consists of the following items: CLIN 0001 – BOX, SHIPPING. SIZE: 16 INCH LONG X 16 INCH WIDE X 12 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L962487. 164 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0002 - BOX, SHIPPING. SIZE: 12 INCH LONG X 10 INCH WIDE X 8 INCH DEEP (INSIDE DIMENSIONS). FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED CARTON (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 POUNDS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 POUNDS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER RECYCLED MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L962484. 213 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0003 - BOX, SHIPPING. SIZE: 28 INCH LONG X 20 INCH WIDE X 16 3/4 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: DOUBLE WALL (DW). FLUTE DESIGNATION: C BOX JOINT: STAPLED. BURSTING STRENGTH GRADE: 350 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 120 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 4 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L970211. 193 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0004 – BOX, SHIPPING. SIZE: 28 INCH LONG X 28 INCH WIDE X 6 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L040019. 16 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0005 - BOX, SHIPPING. SIZE: 8 INCH LONG X 8 INCH WIDE X 6 INCH DEEP (INSIDE DIMENSIONS). FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED CARTON (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED BURSTING STRENGTH GRADE: 275 POUNDS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS IS 95 POUNDS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER RECYCLED MATERIAL. 25 EACH PER BUNDLE ASTM D5118/D5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L962481. 1411 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0006 - BOX, SHIPPING. SIZE: 10 INCH LONG X 8 INCH WIDE X 6 INCH DEEP (INSIDE DIMENSIONS). FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED CARTON (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 POUNDS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 POUNDS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L962485. 1600 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0007 - BOX, SHIPPING. SIZE: 24 INCH LONG X 16 INCH WIDE X 16 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L962488. 64 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0008 - BOX, SHIPPING. SIZE: 45 INCH LONG X 22 INCH WIDE X 22 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: DOUBLE WALL (DW). FLUTE DESIGNATION: C BOX JOINT: STAPLED. BURSTING STRENGTH GRADE: 350 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 120 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 2 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L970210. 381 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0009 - BOX, SHIPPING. SIZE: 16 INCH LONG X 16 INCH WIDE X 16 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L980011. 90 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL CLIN 0010 - BOX, SHIPPING. SIZE: 20 INCH LONG X 20 INCH WIDE X 4 INCH DEEP (INSIDE DIMENSIONS). TYPE: CORRUGATED FIBERBOARD (CF). STYLE: REGULAR SLOTTED (RSC). CLASS: DOMESTIC (DOM). VARIETY: SINGLE WALL (SW). FLUTE DESIGNATION: C BOX JOINT: GLUED. BURSTING STRENGTH GRADE: 275 LBS PER SQUARE INCH (MULLEN TEST). MAXIMUM WEIGHT OF BOX AND CONTENTS: 95 LBS. 100% RECYCLED FIBER CONTENT WITH 35% BEING POST CONSUMER MATERIAL. 25 EACH PER BUNDLE. ASTM D5118/5118M AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L040018. 104 BUNDLES @ $_______________ PER BUNDLE = $_______________ TOTAL NOTE: ALL PRICE MUST BE ROUNDED TO TWO DECIMAL POINTS. CONTRACTOR SHALL IDENTIFY THE SMALL BUSINESS MANUFACTURER(S) FOR THE PRODUCTS PROPOSED ON THE ABOVE CLINS: ___________________________ NOTE: REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET. Delivery point is FOB DESTINATION to DLA Distribution Susquehanna, Base Sup EBS Bldg. 302, DR 12, 5450 Carlisle Pike, Mechanicsburg, PA 17050-2411. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. Payment for supplies under this order will be made by the Acquisition Operations Office via the Government Purchase Card (VISA). NOTE: Since all payments under this purchase order will be made via the Government Purchase Card, the Contractor must accept the VISA Credit Card for payment of all supplies ordered under this purchase order. The following FAR and DFARS clauses and provisions apply to this acquisition: FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (d) products samples, (e) multiple offers and (h) multiple awards. NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity’s Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an “Agency Level Protest under Executive Order No. 12979.” (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer’s decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) OFFER SUBMISSION INSTRUCTIONS–Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number; (2) Solicitation number; (3) Unit Price and extended prices for all CLINS; (4) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code, (5) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation) (6) Name of the Small Business Manufacturer(s) and (7) Desired and Required Time of Delivery as indicated at clause 52.211-9. 2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award. FAR 13-106-2 Evaluation of Quotations or Offers - The Government intends to evaluate quotes in response to this quotation and will award one firm-fixed price contract to the responsible offeror whose quote represents the total overall lowest price for all CLINS. Therefore to be considered for award, a quote must be provided for all CLINS. FAR 52.212-4 Contract Terms and Conditions–Commercial Items. Addenda to 52.212-4; the following clauses apply: FAR 52.247-34 FOB Destination 52.211-9 – DESIRED AND REQUIRED TIME OF DELIVERY (JUN 1997) (a) The Government desires delivery to be made according to the following schedule: DESIRED DELIVERY SCHEDULE – All items within 14 days after date of contract award. If the offeror is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However, the offeror’s proposed delivery schedule must not extend the delivery period beyond the time for delivery in the Government’s required delivery schedule as follows: REQUIRED DELIVERY SCHEDULE – All items with 21 days after date of contract award. Offers that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the offeror proposes no other delivery schedule, the desired delivery schedule above will apply. OFFEROR'S PROPOSED DELIVERY SCHEDULE: All items with _____ days after date of contract award. (b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day the award is dated. Therefore, the offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected. (End of Clause) 52.211-16–VARIATION IN QUANTITY (APR 1984) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below. (b) The permissible variation shall be limited to: 10 Percent increase 10 Percent decrease This increase or decrease shall apply to the total quantity of each CLIN. (End of Clause) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders–Commercial Items (in paragraph (b) the following clauses apply: FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.219-6 Notice of Total Small Business Set-Aside FAR 52.219-28 Post Award Small Business Program Rerepresentation FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor–Cooperation with Authorities and Remedies FAR 52.222-21 Prohibition of segregated facilities FAR 52.222-26 Equal Opportunity FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.225-13 Restriction on Certain Foreign Purchases FAR 52.232-36 Payments by Third Party DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. The following additional clauses/provisions apply: DFARS 252.225-7036 Buy American Act–Free Trade Agreement–Balance of Payments Program ALT I DFARS 252.247-7023 Transportation of Supplies by Sea DLAD 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) Offerors responding to this announcement shall submit their quotations via FAX to Julie Metzger, 717-770-7591 or e-mail to Julie.Metzger@dla.mil. All quotes must be received by AUGUST 19, 2010 AT 3:30 PM EST to be considered for award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP3300-10-Q-0191/listing.html)
- Place of Performance
- Address: DLA Distribution Susquehanna, Base Sup EBS, Bldg. 203, DR 12, 5450 Carlisle Pike, Mechanicsburg, Pennsylvania, 17050-2411, United States
- Zip Code: 17050-2411
- Zip Code: 17050-2411
- Record
- SN02229615-W 20100807/100805234844-822413a449beca3944305df4a899d4f0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |