MODIFICATION
Z -- Weld/Replace POL Pressure Relief Valves
- Notice Date
- 8/3/2010
- Notice Type
- Modification/Amendment
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Air Force, Pacific Air Forces, 36 CONS - Andersen, Unit 14040, Andersen AFB, 96543-4040
- ZIP Code
- 96543-4040
- Solicitation Number
- F1C3470179AG01
- Archive Date
- 8/25/2010
- Point of Contact
- Shea Roundtree, Phone: 671-366-4943
- E-Mail Address
-
scheherezade.roundtree@andersen.af.mil
(scheherezade.roundtree@andersen.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Scope of work: Replace pressure relief system at facility 26206 AFH RESPONSIBILITIES 1) To ensure all areas affected by the line repairers are notified at least 24 hrs in advance. 2) To ensure all permits are in order prior to start up and all contractors are sighed and a safety briefing is held. 3) To drain the lines and confirm that they are properly degas prior to any hot work. 4) To ensure that contractors are following all applicable safety regulations. 5) To ensure all parts to be used are all mil spec. 6) To ensure all signage are posted by the contractor and all personal protective equipment are in good condition. 7) To supply limited support in terms of browsers and drip pans and atmospheric testing. CONTRACTER RESPONSIBILITY 1) To ensure all parts and bolts and gaskets to be used meet all applicable mil specs and all parts will be stainless steel 3/16 150 lbs schedule 80 rated. 2) To install blinds or inserts to isolate the line and possibly dry ice for inert the system. 3) To fabricate and install new pressure relief lines as per design give by Steve brooks of Enterprise Engineering Inc. 4) To remove the old pressure relief lines and install the new ones, this will also include the replacement of the 1" and ¾" carbon steel nozzles and flanges that are welded to the pipe lines. 5) To have all welds inspected and tested by a certified inspector. 6) After all repairs have been made contractors will spot paint all affected areas and remove all debris related to the project. 7) Contractor will be responsible for supplying all signage and safety barricades. 8) Contactor will be supplied a daily sign in sheet that will be turned in at the end of the day. Refer to attached statement of work (Attachment D).
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/PAF/36CONS/F1C3470179AG01/listing.html)
- Place of Performance
- Address: Andersen AFB, Yigo, Guam, 96929, United States
- Zip Code: 96929
- Zip Code: 96929
- Record
- SN02227996-W 20100805/100804000401-cd1eb19b7d614214a63368bcbbb5e5fb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |