SOLICITATION NOTICE
51 -- (SAF) Tools
- Notice Date
- 7/29/2010
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 561 IOWA AVE, BLDG 606, FT Leonard wood, MO 65473
- ZIP Code
- 65473
- Solicitation Number
- W911S7-10-T-0166
- Response Due
- 8/20/2010
- Archive Date
- 2/16/2011
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W911S7-10-T-0166 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-44. The associated North American Industrial Classification System (NAICS) code for this procurement is 332212 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2010-08-20 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Leonard Wood, MO 65473 The USA ACC MICC Fort Leonard Wood requires the following items, Brand Name or Equal, to the following: LI 001, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Top Tool CabinetBrand name or equal to Craftsman part number 59723 Full-width drawer pulls and piano hinge. Ball bearing drawer slides. Removable drawers. Locking system with reversible keys. Long-lasting and attractive baked enamel finish Drawer Dimensions: 4 Drawers - 14 5/8 D x 22 3/8 W x 2 H in.2 Drawers - 14 5/8 D x 22 3/8 W x 3 1/8 H in.3 Drawers - 14 5/8 D x 22 3/8 W x 4 1/8 H in., 39, EA; LI 002, (SUBJECT TO THE AVAILIBILITY OF FUNDS)14 Drawer CabinetBrand name or equal to Craftsman part number 59724 16,362 cubic inches of storage. All steel construction. Drawer system securely latches drawers in place and is easy to release. Full extension ball-bearing drawer slides. Drawer dimensions: 6 drawers measure 22 3/8" x 16 1/2" D x 3 1/8" H1 drawer measures 22 3/8" W x 16 1/2" D x 4 1/8" H1 drawer measures 22 3/8" W x 16 1/2" D x 6 3/8" H4 drawers measure 11 3/4" W x 16 1/2" D x 3 1/8" H1 drawer measures 11 3/4" W x 16 1/2" D x 4 1/8" H1 drawer measures 11 3/4" W x 16 1/2" D x 12 3/4" HKeyed internal locking system. 5" x 2" casters combined with caster channels. Overall deminsions 41" W x 18" D x 41 1/2" H, 39, EA; LI 003, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Air impact wrenchBrand name or equal to Ingersol Rand model 2123/8" drive180 ft-lb maximum torqueConsistent torque even with air pressure changesMore torque, less vibration Pistol-style yet extremely compact and lightweightBuilt-in power regulator helps control torqueHandle exhaustJumbo hammer impact mechanismPressure-feed lubrication system, 39, EA; LI 004, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Air impact wrenchBrand name or equal to Ingersol Rand model 21301/2" drive, Twin hammer mechanism, 550 ft-lb of maximum torque, Full-stroke tease throttle, Mult-position power management, 39, EA; LI 005, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Angle die grinderBrand name or equal to Ingersol Rand model 301Right angle grinderSelf-locking throttle Ball bearing constructionPrecision machined gearing.25 hp power rating1/4" air inlet size, 39, EA; LI 006, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Air ratchetBrand name or equal to NAPA model NPT6-1019Ultra Compact For Access In Tightest Spots. Reversible w/ Lever Throttle For Precise Speed Control Attributes Drive Size : 1/4"Maximum Torque : 25 ft lbsHose Size : 3/8" I.D.Inlet Fitting Size : 1/4"-18 NPTSpeed : 350 rpmWorking Air Pressure : 90 psi, 39, EA; LI 007, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Tool setBrand name or equal to Craftsman 385 piece tool set, item number 009-83076Features an assortment of wrench styles, including combination, flex ratcheting, flare nut and ignition, full polish thin profile ratchets and more.Number of Adapters: 4 Number of Nut Drivers: 12 Number of Bits: 35 Number of Additional Tools: 7 Number of Pliers: 1 Number of Sockets: 206 Number of Wrenches: 84 Number of Screwdrivers: 14 Number of Extensions: 8 Number of Hex Keys: 14 Joint Type: Slip Pliers Type: Slip-joint Drive Size: 1/4 in., 3/8 in. and 1/2 in, 39, EA; LI 008, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Impact socket setBrand name or equal to Chicago Pneumatic 93 piece impact socket set, item number 009-81232Includes 3/8" & 1/2" impact sockets, adapters and extensions. 3/8" drives include: 8 english standard and 8 deep well sockets (5/16-3/4), 10 metric standard and 10 deep well sockets (10mm-19mm), two extensions (3" & 6"), one universal joint. 1/2" drives include: 12 english standard and deep well sockets (3/8-1 1/16), 12 metric standard and deep well sockets (12mm-27mm), 1 3/4"x13/16" flip, 1/2"x3/8" male adapter, three extensions (3,5 &10"), one universal joint., 39, EA; LI 009, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Hammer setBrand name or equal to Craftsman 3 piece dead blow hammer set, item number 009-3835814 in. fiberglass handles with ergonomic grips. Cast urethane striking surface. 1, 2, 3 lb. hammers., 39, EA; LI 010, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Torque wrenchBrand name or equal to Craftsman 1/2" drive torque wrench, item number 009-44597 1/2 in. square drive wrench with digital readout. Measures 25 to 250 ft. lb. in 2 ft. lb. increments. Readout gives precise torque settings in both English and metric units. Accurate to 3 percent on clockwise or right-handed reading greater than or equal to 20 percent of capacity. Handle designed for easy setting., 39, EA; LI 011, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Torque wrenchBrand name or equal to Craftsman 3/8" drive torque wrench, item number 009-445933/8 in. square drive wrench measures 25 to 250 in. lbs. in 1 in. lb. increments. Micrometer-type scales stamped into housing show torque settings in both English and metric units. Accurate to 4 percent on clockwise or right-handed reading greater than or equal to 20 percent of capacity. Larger ergonomic handle., 39, EA; LI 012, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Locking tools setBrand name or equal to Irwin 10 piece locking pliers set, Craftsman item number 009-45635Set includes:-seven pliers (5,7,& 10") curved jaw with wire cutter, 10" straigh jaw, 6" & 9" long nose, 12" large jaw-three locking wrenches (7/16-3/4, 5/8-1 1/8, & 1/4-9/16, 39, EA; LI 013, (SUBJECT TO THE AVAILIBILITY OF FUNDS)All purpose tool setBrand name or equal to Craftsman 42 piece all purpose tool set, item number 009-50090Set includes 21 screwdrivers, nine slotted (3/32 x 1 1/2, 1/8 x 2, 1/8 x 4,3/16 x 4, 1/4 x 1 1/2, 1/4 x 4, 1/4 x 6, 5/16 x 1 3/4, 5/16 x 8 in.); six phillips (#0 x 1 1/2, #0 x 2 1/2, #1 x 3,#2 x 1 1/2, #2 x 4, #3 x 6 in.); six Torx (T10, T15, T20, T25, T27, T30); one scratch awl and one 4-way pocket driver. Also includes 6- and 8inch wrenches; six pliers (6-inch diagonal cut, 6 1/2inch long nose, 6 3/4-inch slip joint, 7-inch wide jaw, 8-inch slip joint, 9 1/2-inch arc joint); punch and chisel holder with five punch tools (3/8 x 4 1/2 prick, 3/8 x 4 1/2 center, 1/16 x 4 pin, 3/32 x 4 pin, 1/8 x 4 1/2 in. pin); two alignment tools (5/32 x 7, 3/16 x 9 in.); cold chisels (1/2 x 5 3/4, 5/8 x 6, 3/4 x 6 1/2 in.)., 39, EA; LI 014, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Hammer setBrand name or equal to Craftsman 5 piece ball peen hammer set, item number 009-38528Includes 8, 12, 16, 24 and 32 oz. steel handle ball pein hammers. Precision-machined head and pein assure uniformity and accurately crowned face and bevel. Molded cushioned comfort grip., 39, EA; LI 015, (SUBJECT TO THE AVAILIBILITY OF FUNDS)Voltage testerBrand name or equal to Fluke voltage tester model 87V, Craftsman item number 034-70028Specifications:Voltage DC Maximum Voltage: 1000V Accuracy: (0.05%+1) Maximum Resolution: 10 V Voltage AC Maximum Voltage: 1000V Accuracy: (0.7%+2) True RMS AC Bandwidth: 20kHz* *with low pass filter; 3db @ 1kHz Maximum Resolution: 0.1 mV Current DC Maximum Amps: 10A (20 A for 30 seconds maximum) Amps Accuracy: (0.2%+2) Maximum Resolution: 0.01 A Current AC Maximum Amps: 10A (20 A for 30 seconds maximum) Amps Accuracy: (1.0%+2) True RMS Maximum Resolution: 0.1 A Resistance Maximum Resistance: 50 M Accuracy: (0.2%+1) Maximum Resolution: 0.1 Capacitance Maximum Capacitance 9,999 F Accuracy (1%+2) Maximum Resolution 0.01 nF Frequency Maximum Frequency 200 kHz Accuracy (0.005%+1) Maximum Resolution 0.01 Hz Duty Cycle Maximum Duty Cycle 99.9% Accuracy (0.2% per khz +0.1%) Maximum Resolution 0.1% Temperature Measurement: -200.0C - 1090C/-328.0F - 1994.0F excluding probe 80 BK Temperature Probe -40.0C - 260C -40.0F - 500F, 2.2C or 2% whichever is greater Conductance Maximum Conductance 60.00 nS Accuracy (1.0%+10) Maximum Resolution 0.01 nS Diode Range: 3 V Resolution: 1 mV Accuracy: (2 % + 1) Duty Cycle Range Accuracy: Within (0.2% per kHz + 0.1 %), 39, EA; LI 016, (SUBJECT TO THE AVAILIBILITY OF FUNDS)CreeperBrand name or equal to Craftsman professional racing creeper, Craftsman item number 009-5115040" race-style creeper. The interior steel frame is fully integrated and covered with foam and leatherette vinyl. The body of the creeper has bolsters on each side for easy maneuvering and extra comfort. Four 2-1/2-in. oil resistant inline rollers. Overall dimensions: 40" x 22-1/2" x 5", 39, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, USA ACC MICC Fort Leonard Wood intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACC MICC Fort Leonard Wood is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to the point of contact in the FBO notice, so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 days or less after receipt of order (ARO). CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. THIS PURCHASE IS SUBJECT TO THE AVAILIBILITY OF FUNDS AT YEAR END FAR CLAUSE 52.232-18 AVAILIBILITY OF FUNDS APRIL 1984 Quote must be valid through 30 September 2010
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/abbda11e6ad8b1d772443df3c1449fb2)
- Place of Performance
- Address: Fort Leonard Wood, MO 65473
- Zip Code: 65473
- Zip Code: 65473
- Record
- SN02223103-W 20100731/100730000341-abbda11e6ad8b1d772443df3c1449fb2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |