SPECIAL NOTICE
74 -- CANCELATION of Combined Synopsis/Solicitation W912Dq-10-T-1010 for SIGN SHOP PRINTER
- Notice Date
- 7/20/2010
- Notice Type
- Special Notice
- NAICS
- 323119
— Other Commercial Printing
- Contracting Office
- USACE District, Kansas City, ATTN: CENWK-CT, 700 Federal Building 60l East 12th Street, Kansas City, MO 64106-2896
- ZIP Code
- 64106-2896
- Solicitation Number
- W912DQ-10-T-1010
- Response Due
- 7/1/2010
- Archive Date
- 10/18/2010
- Point of Contact
- WILLIE HODGES, 816 389-3469
- E-Mail Address
-
USACE District, Kansas City
(willie.e.hodges@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- The Combined Synopsis/Solicitation Sign Shop Printer W912DQ-10-T-1010 has been canceled in its entirety. The requirement is still needed and will be re-posted at a later date. 1. The Salient characteristics for Mutoh Model: Value Jet 1614-64 Line up Printer (or equal) are: "Inter weave pattern (or pattern that eliminates banding) "Separate print-cut functionality "Materials Media Kit "180 nozzles x 8 lines x 1 head "Print Mode 1440/720/540 dpi: 12 Modes (resolutions & passes) "Minimum Height: 1.5mm/2.5mm "Minimum Width: 64 inches "Minimum Print Width: 63.6 inches "Approx 183 sq/ft/hr in production mode print speed "Power Requirements 100-120 volts/Dedicated 20 AMP circuit 2. The Salient characteristics for SEAL 62 Pro S Laminator (or equal) are: "54 Base Laminator "61 wide mounting laminator "2 inch Minimum Substrate Thickness "Fully adjustable temperature, speed and pressure settings "Manual nip-adjustments "Roll-to roll operation "Foot switch for hand free operation "CE/ETL/CSA Certified. 3. The Salient characteristics for GRAPHTEC FC8000-160 Series High Performance Roll-Feed Cutting Plotter (or equal) are: "Must be capable of reading the registration marks of the MUTOH ValueJet 1614-64 printer (or equal / compatable offer) "Miniimum cutting area: 64 inch x 164 ft "Auto sheet cutter thickness 58.5 in/s (1484 mm/s) diagonal "Tungsten Carbide Blade (0.9 mm or 1.5mm) "Graphics Control Panel Display "Standard Registration Mark Sensor for automated contour/die-cutting of pre-printed images
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA41/W912DQ-10-T-1010/listing.html)
- Record
- SN02211741-W 20100722/100720235311-faa1acaba7511df150a1e82c20842c4e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |