SOLICITATION NOTICE
99 -- MARKET SURVEY CAPABILITY ASSESSMENT FOR AGILENT EQUIPMENT FOR THE MIKE MONRONEY AERONAUTICAL CENTER, OKLAHOMA CITY, OK
- Notice Date
- 7/20/2010
- Notice Type
- Presolicitation
- Contracting Office
- FEDERAL AVIATION ADMINISTRATION, AMQ-210 AMC - Aeronautical Center (Oklahoma City, OK)
- ZIP Code
- 00000
- Solicitation Number
- 9758
- Response Due
- 7/27/2010
- Archive Date
- 8/11/2010
- Point of Contact
- Christopher Ekadis, 405-954-8071
- E-Mail Address
-
christopher.ekadis@faa.gov
(christopher.ekadis@faa.gov)
- Small Business Set-Aside
- N/A
- Description
- This is a market survey for Agilent Equipment as shown below for the Mike Monroney Aeronautical Center (MMAC), Oklahoma City, OK, 73169. Agilent Technologies is the Original Equipment Manufacturer (OEM), and retains the proprietary rights to the original design and technical data. The responses to this market survey will be used for informational purposes only. This is not a screening information request or request for proposal of any kind. The FAA is not seeking or accepting proposals at this time. The FAA will not pay for any information received or costs incurred in preparing the response to the market survey. Therefore any cost associated with the market survey submission is solely at the interested vendor's expense. At this time the nature of the competition has not been determined. The FAA may decide to do a full and open competition or set aside all or part of the procurement for small businesses, service-disabled veteran-owned small businesses or eligible socially and economically disadvantaged businesses that are certified by the SBA for participation in the SBA's 8(a) Program. The purpose of this market survey is to solicit statements of interest and capabilities from small businesses, service-disabled veteran-owned small businesses and 8(a) certified firms, capable of providing the Agilent Equipment as shown below: The NAICS Code for this requirement is 334513, Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a Small Business Size Standard of 500 employees. The quantities, descriptions and part numbers for this procurement are shown below: Quantity of one (1)Agilent N5531S Measuring Receiver System consisting of:N1911A Power meterN1911A-A6J Certificate of calibration (ANSI Z540)R-51B-001-3C Return to Agilent Warranty (3 year)N1911A-200 Cable Adapter 11730xN1911A-0BW Service and Calibration GuideE4440A PSA Spectrum AnalyzerE4440A-233 Built-in measuring receiver personalityE4440A-107 Audio input 100kOhmE4440A-123 Switchable MW preselector bypassE4440A-110 RF/uW internal preamplifierE4440A-UK6 Certificate of calibrationE4440A-033 Measuring receiver connector accessory kitE4440A-0BW Service documentationR-51B-001-3C Return to Agilent Warranty (3 year)N5532A-504 Sensor ModuleN5532A-A6J ANSI Z540 CalibrationN5532A-019 Output adapter for N191xA P-seriesR-51B-001-3C Return to Agilent Warranty (3 year)N5532A-526 Sensor ModuleN5532A-A6J ANSI Z540 CalibrationR-51B-001-3C Return to Agilent Warranty (3 year) Quantity of one (1)Agilent E8663D Signal GeneratorPart Number: E8663D/503/UK6/ABA/1EU/UNT/1EH/1E1/UNX/R-51B-001-3C Quantity of two (2)Agilent E8257D PSG Analog Signal GeneratorPart Number: E8257D/532/1E1/1EU/UNX/UK6/ABA/R-51B-001-3C Quantity of one (1)Agilent N8485A Power SensorPart Number: N8485A W/OPTIONS A6J/R-51B-001-3C Quantity of one (1)Agilent 8494G/UK6 Programmable Step Attenuator w/Certificate of calibrationQuantity of one (1)Agilent 8496G/UK6 Programmable Step Attenuator w/Certificate of calibrationQuantity of one (1)Agilent 86205A 50 Ohm RF BridgeQuantity of one (1)Agilent 0955-0455 Filter, LowpassQuantity of one (1)Agilent 0955-0487 U-Wave Filter, Lowpass Quantity of two (2)Agilent 0955-0491 U-Wave Filter Quantity of two (2)Agilent 9135-0005 Filter-Electrical This market survey is also being conducted in order to obtain the information necessary to determine whether adequate competition exists to set-aside the competition among small businesses, service-disabled veteran-owned small businesses or 8(a) certified firms. Interested firms are required to submit the attached Business Declaration form and a copy of their SBA 8(a) certification letter, if applicable. In order to make this determination the FAA requires the following from interested vendors: 1. Capability Statement - This document should identify: Type of services provided by your firm, Size and type of services provided by previous contracts (elaborate and provide detailed information and past performance), Number of years in business Attached is a Business Declaration Form. Please respond by reviewing the items listed above, and submitting a filled-out and signed copy of the Declaration form (please submit electronically, email to address below). All responses to this market survey must be received by Tuesday, July 27, 2010, 3:00 CST (Oklahoma Time). All submittals should be submitted by email to: Federal Aviation AdministrationATTN: Christopher Ekadis Email: christopher.ekadis@faa.gov
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOT/FAA/MMACTR/9758/listing.html)
- Record
- SN02211622-W 20100722/100720235215-27e8bacd5137e3b1f1a275a2f0571e29 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |