Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JULY 16, 2010 FBO #3156
MODIFICATION

49 -- HYDRAULIC CYLINDER SERVICER

Notice Date
7/14/2010
 
Notice Type
Modification/Amendment
 
Contracting Office
2172 13 1/2 Street, FORT WORTH, KY 42223
 
ZIP Code
42223
 
Solicitation Number
W91248-09-T-0019
 
Response Due
7/14/2010
 
Archive Date
1/10/2011
 
Point of Contact
Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
 
E-Mail Address
clientservices@fedbid.com;
 
Small Business Set-Aside
N/A
 
Description
AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W91248-09-T-0019 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-41. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of $7.00M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2010-07-14 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Campbell, KY 42223 The USA ACC MICC Fort Campbell requires the following items, Brand Name or Equal, to the following: LI 001, Hydraulic Cylinder Servicer, Model HCS-60-L; Maximum Cylinder Length - 34 ft.; Maximum Cylinder Diameter - 20/30 ins.; Maximum Available Torque - 60,000 lb./ft.; Maximum Rod Extraction Force - 7 1/2 Tons; Rod Extraction Speed - 4 ft. in 16 sec.; 8 RFP Hydraulic Nut Runner Productes 5000 lb/ft. Torque; Electric Pump - All Voltages, 50/60 Hz - 3 Phase, 7 1/2 HP., 1, EA; LI 002, Manual Valve Package, #19524, 1, EA; LI 003, Low Torque Monitor, #10048, 1, EA; LI 004, Deep Socket Adapter Insert Package, #11910, 1, EA; LI 005, Universal Ball Joint Adapter, #906-60, 1, EA; LI 006, Headstock Blank Chuck Adapter, #908, 1, EA; LI 007, V-Block Chuck Wings, #909, 1, EA; LI 008, Off-Set Chuck Wings, #918, 1, EA; LI 009, Hex Insert Package, 5"-8", #986-992, 1, EA; LI 010, Hex Insert Package, 130mm-170mm, #100-1006, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, USA ACC MICC Fort Campbell intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACC MICC Fort Campbell is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items or a statement that representations and certifications can be accessed at the ORCA website. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. No used, re-furbished, or gray market equipment will be accepted, new equipment only. Destingation pricing to Fort Campbell, Kentucky (42223) is required. Point of Contact is June Fletcher-Schiewe, 270-798-3441, linda.j.fletcherschiewe@us.army.mil. Offerors are requested to include their CAGE Code, DUNS, and Tax ID Numbers. This is a Brand Name or Equal requirement. Brand Name is Tuxco. Evaluation factors are Technical (Brand Name or Equal), Performance/Delivery History, and Price. Offers for equal products will be evaluated on the basis on information submitted by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. The Government intends to make a single award to the offeror submitting the lowest priced technically acceptable offer provided performance/delivery alerts are favorable. Performance/delivery alerts available from FedBid will be considered. FAR provision 52.211-6 Brand Name or Equal is applicable.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/aa7c55090cea4d07560026dfa4d4898f)
 
Place of Performance
Address: Fort Campbell, KY 42223
Zip Code: 42223
 
Record
SN02205988-W 20100716/100714235355-aa7c55090cea4d07560026dfa4d4898f (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.