SPECIAL NOTICE
80 -- 8030-01-476-1042 SEALING COMPOUND - Offer form
- Notice Date
- 6/24/2010
- Notice Type
- Special Notice
- NAICS
- 325520
— Adhesive Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), Center for Facilities Maintenance and Hardware (CFMH)(6QSA), 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
- ZIP Code
- 64131
- Solicitation Number
- M9-MPNBLX6040
- Archive Date
- 7/14/2010
- Point of Contact
- Matthew S. Salisbury, Phone: 816-823-1388
- E-Mail Address
-
matthew.salisbury@gsa.gov
(matthew.salisbury@gsa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Offer submittal form, optional. Please include all requested information. Quantity 15, destination is Norfolk VA 23511. Successful offeror must be currently active in the Central Contractor Registration ( www.ccr.gov ). 8030-01-476-1042 UI: RO SEALING COMPOUND, EXPANDED PTFE TAPE: DESCRIPTION In accordance with SAE specification AMS 3255 dated December 1995, an expanded fuel-, oil-, and water-resistant polytetrafluoroethylene tape with acrylic adhesive for gasketing and sealing aircraft access panels and other gasketing applications. Exception to specification: Change title of Table 3, page 5 to read: "TABLE 3 - Continuous Non-Ribbed Sealing Tape, Sizes and Tolerances". Class 1: continuous ribbed Tape Size: tape overall width - 1.10 inches edge rib width - 0.10 in thick and 0.12 inch wide 4 ribs, width - 0.47 in thick and 0.08 in wide Adhesive: none Color: gray Roll size: a roll 100 feet long. Shelf life code: 0 (stable) ITEM MARKING Each item shall be marked with the following: (1) lot or batch number (2) manufacturer's name and part number(s) (3) shelf life monitoring data (for items with a shelf life) including starting dates of manufacture and stop/check dates of reinspection or expiration. (4) instructions for use and storage (5) markings required by specification, if applicable PACKAGING PACKAGING: The product shall be furnished in the specified quantities and on a release paper backing, if required., and packaged in accordance with the supplier's normal commercial practice, provided that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents during shipment, handling, storage, and redistribution. The package shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage, and redistribution. PACKING INTERMEDIATE PACKAGING: Not more than 25 units packaged as specified above shall be further packaged in a close fitting corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. PACKING: Intermediate packaged boxes may be further packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification (UFC) and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the UFC. Gross weight of box and contents shall not exceed 65 pounds. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/. South Coast Air Quality Management District Provision: If the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Stacking Strength: The pallet plus the load shall be capable of supporting two additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/cf5a2af939dae06b5348bfdcc701f492)
- Record
- SN02187258-W 20100626/100624235118-cf5a2af939dae06b5348bfdcc701f492 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |