SOURCES SOUGHT
83 -- This synopsis is issued for the sole purpose of conducting Market Research to identify potential manufacturers of 600lb breaking strength Polyester Cord used as parachute suspension line.
- Notice Date
- 6/22/2010
- Notice Type
- Sources Sought
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- RDECOM Natick Contracting Center ICP (RDECOM-CC), ATTN: CCRD-NA, Building 1, Kansas Street, Natick, MA 01760-5011
- ZIP Code
- 01760-5011
- Solicitation Number
- W58P05-10-R-0015
- Response Due
- 7/22/2010
- Archive Date
- 9/20/2010
- Point of Contact
- David F. Roy, 508-233-5198
- E-Mail Address
-
RDECOM Natick Contracting Center ICP (RDECOM-CC)
(david.francis.roy@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Request for Information (RFI)-22 JUNE 2010 This is not a solicitation for bids/proposals but a Request for Information. This synopsis is issued for the sole purpose of the Soldier Support Branch of the Natick Contracting Division, U.S. Army RDECOM to conduct Market Research in accordance with Federal Acquisition Regulation (FAR) Part 10. This effort is to identify potential manufacturers of 600lb breaking strength Cord, Polyester, Coreless commonly used as parachute suspension line. The manufacturing processes that govern the manufacture of this cord are detailed in a commercial industry specification maintained by the Parachute Industry Association. Specifically, this cord conforms to Type I in PIA-C-2754B, Cord, Polyester, Coreless dated 08 January 2009. The Government is conducting supplemental market research to identify potential domestic manufacturing capabilities to produce this cord in support of current procurement contracts for personnel parachutes. Due to its critical use as suspension line, this cord is source controlled. Currently there is only one vendor who has been approved to produce this cord and meet the requirements for a domestic source as outlined in Title 10 United States Code Section 2533a (The Berry Amendment). The Berry Amendment restricts the Department of Defense acquisition of textiles, as end items or components of end items, to only those textiles which are grown, produced, processed, reprocessed, or reused in the U.S. Specific Material, Manufacturing and Processing Requirements. 1. Color is Natural 2. Yarn is 1100 denier bright, high tenacity multifilament polyester yarn. 3. Coreless braid is a 2 over, 2 under pattern. 4. Single ply yarn is braided using 24 carriers and 2 ends per carrier. 5. Cord is required to be heatset to a sufficient degree to allow not more than 9% shrinkage when tested in accordance with commercial test method PIA-TM-6010. 6. Cord is treated with an acrylic or polyethylene resin finish to result in not more than 2% additional weight. Typical finish is a polyethylene resin. The process of applying the finish shall not cause any detrimental effect to the physical properties of the cord or cause a significant color change. 7. The final heatset and finished cord is required to possess a minimum of 600 lbs breaking strength and 7%-11% elongation for each test specimen when tested in accordance with commercial test method PIA-TM-6016. 8. Final picks per inch are required to be 15-16. 9. Length of cord per unit weight (pound) is required to be a minimum of 180 feet. 10. The cord is required to meet several other properties such as colorfastness to light and laundering, resistance to light and heat, pH, water soluble extractable matter and finish tackiness. Specifics regarding these properties and requirements as well as quality inspection and acceptance, put-up length and packaging requirements are detailed in PIA-C-2754B. A copy of this specification and associated test methods is available for purchase at www.pia.com. Respondents are requested to submit to the project officer the following, at no expense to the Government: 1. A 250 yard production representative sample of the finished product. 2. All material certifications and test reports as required by PIA-C-2754 3. An affidavit affirming that the material and all processes used in the manufacture of this material are fully compliant with the Berry amendment. 4. Company name 5. Address 6. Telephone number 7. Point(s) of Contact (phone & email address) 8. Business size 9. DUNS Number 10. CCR Registration Number 11. Federal CAGE Code 12. Description of similar contracts 13. Manufacturing lead times for this cord 14. Minimum quantities per purchase 15. Projected price per yard at the minimum and maximum quantities 16. Monthly production capacity for this cord 17. Information regarding manufacturing capabilities Project officers for this RFI are: 1. Christine Charette Email address: Christine.charette@us.army.mil 2. John Stallings Email address: john.stallings2@us.army.mil Product and Responses may be mailed to the following address: US Army NSRDEC ATTN: Christine Charette 15 Kansas Street BLDG 3, Room 225 AMSRD-NSC-WP-AD Natick, MA 01760-5000 Questions may be submitted to the above project officers through email, faxed via 508-233-6391 or mailed to the above address. No discussions will be conducted telephonically. This RFI is not a commercial solicitation per FAR Part 12. For assistance in interpreting the CBD announcements, please see the CBD Reader's Guide.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/82950094a7dd1eae6b7a8e1a9e8fa913)
- Place of Performance
- Address: US Army Natick Soldier Research Development & Engineering Center ATTN: RDNS-WPA-D, Bldg 3, Rm 225 Natick MA
- Zip Code: 01760-5011
- Zip Code: 01760-5011
- Record
- SN02185062-W 20100624/100622235854-82950094a7dd1eae6b7a8e1a9e8fa913 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |