MODIFICATION
66 -- STRAIN GAUGE LOAD CELL
- Notice Date
- 6/10/2010
- Notice Type
- Modification/Amendment
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- NNC10339784Q
- Response Due
- 6/18/2010
- Archive Date
- 6/10/2011
- Point of Contact
- Garnette A Dutton, Buyer, Phone 216-433-2828, Fax 216-433-2480, Email Garnette.A.Dutton@nasa.gov - Dorothy E Viancourt, Purchasing, Phone 216-433-2532, Fax 216-433-2480, Email Dorothy.E.Viancourt@nasa.gov
- E-Mail Address
-
Garnette A Dutton
(Garnette.A.Dutton@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS NOTICE CONSTITUTES AMENDMENT NO. 1 TO THE COMBINED SYNOPSIS/RFQ FOR STRAINGAUGE LOAD CELL. Companies shall acknowledge all amendment(s) in their quote. Thisnotice serves as the official amendment to subject synopsis/RFQ and a written amendmentwill not be issued.The purpose of this amendment is to extend the response date; and to post questions andanswers regarding the specifications for the load cell as follows:Question 1. We need to know the mechanical envelope to quote. There is a descriptionbut a drawing with tolerances would be excellent. Answer 1. Sketch attached, a detailed drawing with tolerances does not exist. Thecritical dimensions are shown as 3.5 as the effective width between the tapped screwholes on the sensing elements. The load cell also shall not be longer than 5.5 asshown in the front view of the sketch to fit into the existing installation.Question 2. Can you provide me with the third dimension, height of the load cell, or apicture of the original load cell? Answer 2. Sketch attached.Question 3. Are there any extraneous forces (i.e. bending, shear, etc.) outside oftension and compression forces? Answer 3. No.Question 4. Physical Characteristics #22: Does the effective width include theconnector mounting box on the side of the load cell, or is it the diameter of the loadcell force sensing element? Answer 4. The effective width is the sensing element and physical connection interfaceas shown on the attached sketch.Question 5. If the #4 above does include the connector mounting box, then what is thediameter of the load cell force sensing element? Is it 2-1/4 inches? Answer 5. Yes.The due date for receipt of offers is extended to June 18, 2010.Documents related to this procurement are available over the Internet.These documentsreside on a World Wide Web (WWW) server which may be accessed using a WWW browserapplication. The Internet site, or URL, for the NASA/GRC Business Opportunities home pageis http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=22 Offerors are responsible for monitoring this site for the release of the solicitation andany amendments. Potential offerors are responsible for downloading their own copy of thesolicitation and amendments (if any).
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GRC/OPDC20220/NNC10339784Q/listing.html)
- Record
- SN02174830-W 20100612/100610235721-d97421f6197882d629f1fb2e798e949e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |