SOLICITATION NOTICE
66 -- Tomography Holders
- Notice Date
- 6/2/2010
- Notice Type
- Presolicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 88 CONS/PK, 1940 ALLBROOK DRIVE, WRIGHT-PATTERSON AFB, Ohio, 45433-5309, United States
- ZIP Code
- 45433-5309
- Solicitation Number
- FA8601-10-T-0208
- Archive Date
- 7/2/2010
- Point of Contact
- Jennifer R. Begg, Phone: 9375222277
- E-Mail Address
-
Jennifer.Begg@wpafb.af.mil
(Jennifer.Begg@wpafb.af.mil)
- Small Business Set-Aside
- N/A
- Description
- The United States Air Force, 88th Air Base Wing, Wright-Patterson AFB, Ohio 45433-5344 is preparing to solicit for a firm-fixed price contract for one dual axis tomography holder and one on axis rotation tomography holder. The contract line items will be firm-fixed price. Proposal equipment shall meet the requirements contained in the specifications below: 1. Quantity of one (1) dual-axis tomography holder with the following functionalities: a. Shall have the ability for room temperature applications when TEM Tomographic imaging or analysis requires in-plane rotation of a specimen. b. Has a fully jewelled mechanism for ultra-precise specimen movement, which should yield highly repeatable specimen rotation, while maintaining eucentric height. c. Must be able to rotate initial specimen fully through 360 degrees, d. When specimen is properly oriented, a two-position precision mechanism must allow for 90 degree in-plain rotation. e. Specimen must be clamped by FlexiClamp to maximize specimen viewing area, even at high tilt angles. f. Must feature optimal title angle range. 2. Quantity of one (1) on-axis rotation tomography holder a. Must be able to accept sharp-pointed, conically-shaped specimens such as those prepared using FIB technology, or those used for atom probe field ion microscopy. b. The specimen should be maintained in a cartridge on the axis of the holder. c. A manual drive must allow full 360 degree rotation of the specimen. d. When rotational orientation is established, the mechanism must lock and a three-position click-stop facilitates indexing the specimen in 120 degree increments. e. At every interval the transmission electron microscopy's goniometer shall be used to capture the tilt series. Allowing full 306 degree information to be obtained from the specimen. f. The specimen cartridge shall be: 1. Precisely positioned with respect to the electron beam; 2. Ejected for ease of specimen loading; and 3. Retracted into the body of the holder to protect the specimen during loading into and removal from the goniometer. Delivery for this equipment should be 2-4 weeks after receipt of order (ARO). FOB Destination. We intend to award this contract sole source under the authority of FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. All responsible sources may submit a capability statement which shall be considered. The proposed source is E.A. Fischione Instruments, 9003 Corporate Circle, Export, PA 15632. At this time no small business set-aside is expected. NAICS Code 334516, Size Standard 500 employees. Refer all questions concerning this synopsis to Jennifer Begg, Contract Specialist, at 937-522-2277, fax at 937-656-1412, or email at jennifer.begg@wpafb.af.mil. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development. The purpose of the Ombudsman is to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate director or contracting officer. Accordingly, the Ombudsman does not participate in the preparation of solicitations, the evaluation of the proposals, or the source selection process. Therefore, for routine matters on individual solicitations, please contact Jennifer Begg at the above number. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Department of Defense (DoD) has determined the Central Contractor Registration (CCR) is the single DoD registration for contractors who conduct business or who are interested in conducting business with the DoD. Contractors must be registered in CCR prior to award for solicitations issued after 21 May 1998. You may contact CCR at 1-888-CCR-2423, fax at 1-703-696-0213. DUNS/CCR website: http://ccr.edi.disa.mil/ccr/cgi-bin/query.pl.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/88 CONS/FA8601-10-T-0208/listing.html)
- Place of Performance
- Address: WPAFB, Ohio, 45433, United States
- Zip Code: 45433
- Zip Code: 45433
- Record
- SN02166073-W 20100604/100602235056-85e3ebae495cf487a6d9fde1f217bb17 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |