Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF APRIL 30, 2010 FBO #3079
SOURCES SOUGHT

58 -- Diode Laser System

Notice Date
4/28/2010
 
Notice Type
Sources Sought
 
NAICS
334516 — Analytical Laboratory Instrument Manufacturing
 
Contracting Office
Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Western Acquisition Division-Boulder, 325 Broadway - MC3, Boulder, Colorado, 80305-3328, United States
 
ZIP Code
80305-3328
 
Solicitation Number
NRMJ3000-10-11534DT
 
Archive Date
5/9/2010
 
Point of Contact
Doris P Turner, Phone: 303-497-3872
 
E-Mail Address
doris.p.turner@noaa.gov
(doris.p.turner@noaa.gov)
 
Small Business Set-Aside
N/A
 
Description
NOAA's Acquisition & Grants Office, Western Acquisition Division-Boulder, intends to negotiate, on a sole source basis, under authority of FAR 13.106-1(b)(1), with Toptica Photonics of Victor, NY for their Toptica DL 100 pro design diode laser system. Background: The laser is needed for NOAA's recently developed Aerosol Scattering to Extinction Ration (ASTER) instrument. The instrument requires an extended cavity diode laser (ECDL) that is grating stabilized, single mode, low noise, and that can accept current modulation at frequencies of several megahertz to enable a very stable lock. Given the high modulation frequencies, it is critical that the current modulation port be a 50 ohm input to match the impedance of the locking circuitry already developed for ASTER. The main component of the current ASTER locking circuitry is the Toptica Digilock module, which has a 50 ohm output for current modulation. The Toptica laser is required to integrate with the Toptica Digilock which entitles NOAA to full support from Toptica. The sole source determination is based on NOAA's market research showing that no other sources with low noise, grating stabilized, single mode lasers at the required wavelength of 672 nm are able meet all requirements. An upper limit for the modulation frequency of 1 MHz is too low for use in ASTER. Required Technical Specifications include: Single mode extended cavity diode laser; Linewidth in the hundreds of kilohertz range; Mode hop free tuning range of tens of gigahertz; Grating Stabilized (tuning range of a few nm); Beam stabilized to avoid need for realignment with tuning; Very low susceptibility to thermal and acoustic disturbances; Low Noise diode current controller (< 1 microamp up to a megahertz) 50 ohm current modulation input; Current modulation bandwidth of several megahertz. Delivery is required on or before 12 weeks after receipt of order (ARO). ***This notice of intent is not a request for competitive proposals and no solicitation package is available. However, firms that believe they can provide equipment that fully meets the Government's requirements may submit substantiating documentation in writing to the identified point of contact within 10 days after publication of this synopsis. Such documentation will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to conduct a competitive procurement, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NOAA/MASC/NRMJ3000-10-11534DT/listing.html)
 
Place of Performance
Address: 325 Broadway, Boulder, Colorado, 80305, United States
Zip Code: 80305
 
Record
SN02134268-W 20100430/100428234739-bef00210415789f789ac623f0d3261c1 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.