SOLICITATION NOTICE
34 -- Proprietary to Patten Tool & Engr. Sawsall Guide Rail System.
- Notice Date
- 3/23/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- N00189 FISC NORFOLK, PORTSMOUTH NAVAL SHIPYARD ANNEX Building 153, 6th Floor Portsmouth, NH
- ZIP Code
- 00000
- Solicitation Number
- N0018910QP046
- Response Due
- 4/16/2010
- Archive Date
- 5/1/2010
- Point of Contact
- Jim Currier 207-438-3870
- E-Mail Address
-
Sawsall Guide Rail System
(jim.currier@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a COMBINED SYNOPSIS/SOLICITATION for commercial items that has been modified to meet the government's requirement and prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (http://www.neco.navy.mil/). The RFQ number is N00189-10-Q-P046. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005 and DFARS Change Notice 201. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 333515 and the Small Business Standard is 500. [Include appropriate information found in the bulleted list on the final page of this document (formerly numbered notes) OR state the following: This is a non-competitive, restricted action]. The FISCN Portsmouth Annex, Kittery, ME Contracting Office requests responses from qualified sources capable of providing: This is sole source to Patten Tool & Engineering, Inc., Kittery, Maine 03904.0001: (3) each 6" SAWSALL GUIDE RAIL SYSTEM #06-1-0104790002: (3) each OILER MOISTURE SEP. UNITS, (for use with pneumatic motors, one single unit, one duel manifold.0003: (3) each SAW, PNEUMATIC 4 & 6 STROKE0004: (3) each HULL CUT DRILL PRESS FOR 6"SAWSALL GUIDE RAIL SYSTEM.All above have been specially designed and drafted proprietary to Patten Tool & Engineering Inc. Delivery is _90 days ARO; Delivery Location is Portsmouth Naval Shipyard, Receiving Officer, Bldg 170, Code 501.2, Kittery, ME 03904. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.212-1, Instructions to Offerors - Commercial Items; 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including: 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.232-33 or 52.232-36. Additional applicable FAR clauses: 52.211-15, 52.213-3 and ALT I, 52.223-11, 52.233-1, 52.242-15, 52.242-17, 52.246-1, 52.252-2, 52.252-6, 52.253-1, 52.247-34.Additional contract terms and conditions applicable to this procurement are: DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items; DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items including: 252.225-7001, 252.232-7003, 252.247-7023.Additional applicable DFARS or local clauses: 252.204-7004.Other clauses or provisions that may be applicable: 5252.232-9402. This announcement will close at 3:30 on _4/16/2010__. Contact Jim Currier who can be reached at 207-438-3870 or email jim.currier@navy.mil. [A determination by the Government to not compete this proposed effort on a full and open competitive basis, is based on urgency and the proprietary engineering and design from Patten Tool & Engr and is based upon responses to this notice is solely within the discretion of the Government.] All responsible sources may contact Patten Tool & Engineering directly for a negotiated agreement,. which shall be considered by the agency. To be awarded on an "All or None" basis, NAVSUP Provision L7011. METHOD OF PROPOSAL SUBMISSION: The NECO website has a "submit bid" button next to the solicitation number. DO NOT use the "submit bid" button on NECO to submit your proposal, as this is a proprietary procurement. Central Contractor Registration (CCR). Quoters must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/. Wide Area Work Flow (WAWF). Quoter's must be registered in WAWF to be considered for award unless government purchase card is utilized for procurement. Registration can be completed on-line at https://wawf.eb.mil. The Navy WAWF Assistance Line is also available at 1-800-559-WAWF (9293).All quotes shall include price(s) FOB Destination, a point of contact, name, email, fax, and phone number, GSA contract number if applicable, business size, payment terms, if registered in WAWF and/or if quoter accepts payment by Government Purchase Card. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. Quoter's shall include a completed copy of 52.212-3 and its ALT I with quotes unless vendor is registered in ORCA. If registered, please so state on quote and affirm representations and certifications are up to date. If Sole Source include: The proposed contract action is for commercial supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 13.501(a)(1)(ii). Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all bids, proposals, or quotations received by the closing response date will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. 52.215-20, Requirements for cost or pricing data or information other than cost or Pricing data (Oct 1997)-alternate IV (Oct 1997). (a) Provide information described below: (1) A copy of the current catalog or established price list for the articles covered by the offer or information where the established price may be found. (2) A statement that the prices quoted herein, including consideration of any discount or rebate arrangements, do not exceed prices charged the offeror's most favored customer for like items in similar quantities under comparable conditions. (3) The offeror is requested to submit the following pricing information on not less than the three most recent sales of, or quotations for, any of the articles being procured hereunder or articles similar thereto. Where the pricing information furnished is on similar articles, the offeror shall advise that the articles are not identical to the articles required hereunder and shall briefly indicate the differences in such articles. Pricing information furnished should be as current as possible, and, to the extent possible, should be on quantities similar to the quantities required hereunder. Date of Sale or Quotation, Quantity, Unit Price, Customer Contract Number, Customer. (4) If unable to furnish a catalog or established price list and the above data, offeror's are requested to furnish the following information with their offers. Unit cost to be comprised of the following information: Purchased Parts, Raw Material, Labor (number of hours, $ per hour), Manufacturing Overhead (percentage) with Component Elements, Other Costs (packing, transportation, etc.), Profit (percentage), G and A Expense (percentage - See Note below), Price as Offered Herein.Note - In accordance with the final rule on DOD Profit Policy established in August 1987, profit on G&A costs is not allowed.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00189PNH/N0018910QP046/listing.html)
- Record
- SN02100727-W 20100325/100324000359-3774341ebc28459d70b3a7be7af4ec6a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |