PRESOL | 56 | Paneling Material, Building, Coiled Steel

FBO DAILY ISSUE OF MARCH 18, 2010 FBO #3036
SOLICITATION NOTICE

56 -- Paneling Material, Building, Coiled Steel

Notice Date: 3/16/2010
Notice Type: Combined Synopsis/Solicitation
NAICS: 423330 — Roofing, Siding, and Insulation Material Merchant Wholesalers
Contracting Office: Department of the Air Force, Direct Reporting Units, USAF Academy - 10 MSG/LGC, 8110 Industrial Drive, Suite 200, USAF Academy, Colorado, 80840-2315
ZIP Code: 80840-2315
Solicitation Number: FA7000-10-T-0028
Point of Contact: Jason S Allen, Phone: 7193332327, Kimberlymae L. Wood, Phone: 719-333-2869
E-Mail Address: jason.allen@usafa.af.mil, kimberlymae.wood@usafa.af.mil
(jason.allen@usafa.af.mil, kimberlymae.wood@usafa.af.mil)
Small Business Set-Aside: Total Small Business
Description: Material, Building, Coiled Steel Combined Synopsis/Solicitation This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ), FA7000-10-T-0028, in accordance with FAR Parts 12 and 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-38, Effective 01 Feb 2010.The North American Industrial Classification System (NAICS) number is 423330 and the small business size standard is 100 employees. This is 100% small business set-aside. The U.S. Air Force Academy, Colorado Springs, Colorado has the following requirement: Provide and deliver the following "Paneling Material, Building, Coiled Steel" requirement to the USAF Academy (Jacks Valley), CO 80840 (FOB Destination) no later than 19 April 2010: Line Item Number Weight NSN Size Color Description Price Per #lb Ext. Price 0001 85,000lbs 5450-01-353-5769.060min (+.0008) x 35.750" * Packaged to be used with ABM/UBM-240 building system machines Cream Tan Siliconized Polyester, Fed Standard 595, Color Chip No, 27778 HD Galvanized Coil Structural Quality GR-50, ASTM A653,SS,Grade 50, G90, Width Tolerance +/-.250", 40" OD Max, 20"/24" ID, Class 1 0002 13,500lbs 5450-01-339-3340.040min(+.0008) x 23.750" * Packaged to be used with ABM/UBM-120 building system machines Cream Tan Siliconized Polyester, Fed Standard 595, Color Chip No. 27778 HD Galvanized Coil Structural Quality GR-50, ASTM A653,SS, Grade 50B, G90, Width tolerance +/-.250", 40" OD Max, 20" ID, Class 1 Total: The government will not provide any equipment for off loading of steel. These products must comply with the Buy American Act (manufactured in the USA; and at least 51% of the cost of materials made, fabricated, purchased must be made in the USA). The following Federal Acquisition Regulations (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained therein: FAR 52.212-1, Instructions to Offerors-Commercial Items. Addenda applies: Contractor shall provide purchase request number, name, address and telephone number of the offeror, unit pricing for 2 line items and a total price (FOB Destination), cage code, DUNS number and size of business FAR 52.212-2, Evaluation-Commercial Items. The Government will award a contract resulting from this solicitation to the responsive offeror with the lowest evaluated price that can meet technical specifications and delivery requirement FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, (If offeror has not completed the On-Line Representations and Certifications (ORCA) in conjunction with the required Centralized Contractor Registration (CCR), the offer shall complete and return these representations and certifications with their initial offer) FAR 52.212-4, Contract Terms and Conditions - Commercial Items with the following addenda: Required Central Contractor Registration Alternate A & FAR 52.252-2 Clauses Incorporated by Reference: This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/. BUY AMERICAN ACT--BALANCE OF PAYMENTS PROGRAM CERTIFICATE (DEC 2009) (a) Definitions. "Commercially available off-the-shelf (COTS) item," "component," "domestic end product," "foreign end product," "qualifying country," "qualifying country end product," and "United States" have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American Act or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that- (i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product; and (ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror certifies that the following end products are qualifying country end products: Line Item Number Country of Origin (3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of "domestic end product": Line Item Number Country of Origin (If known) (End of provision) 252.225-7020 Trade Agreements Certificate. TRADE AGREEMENTS CERTIFICATE (JAN 2005) (a) Definitions. "Designated country end product," "nondesignated country end product," "qualifying country end product," and "U.S.-made end product" have the meanings given in the Trade Agreements clause of this solicitation. (b) Evaluation. The Government- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will consider only offers of end products that are U.S.-made, qualifying country, or designated country end products unless- (i) There are no offers of such end products; (ii) The offers of such end products are insufficient to fulfill the Government's requirements; or (iii) A national interest waiver has been granted. (c) Certification and identification of country of origin. (1) For all line items subject to the Trade Agreements clause of this solicitation, the offeror certifies that each end product to be delivered under this contract, except those listed in paragraph (c)(2) of this provision, is a U.S.-made, qualifying country, or designated country end product. (2) The following supplies are other nondesignated country end products: ( Line Item Number ) ( Country of Origin ) (End of provision) USAFA 5352.242-9000, Contractor Access to Air Force Installations (Aug 2007) (USAFA Supplemented Jul 08) (a) Per Air Force requirements, the contractor shall obtain base identification for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. ADDED: All contractor employees shall comply with United States Air Force Academy (USAFA) security requirements while on the installation. USAFA security needs are supported by both military personnel and contractor employees. (1) Added: At the USAFA, contractor personnel are required to obtain Contractor Access Badges (CABs). CABs are only applicable to contractor employees performing duties requiring weekly access to the installation for a period of time exceeding 7 days. If required access is less than 7 days, the process to obtain access is via application for an AF Form 75, Visitor Pass. Both CABs and Visitor Passes are issued at the Pass and Registration Center (PRC) located at the south entrance to the USAFA. (2) Added: All references to contractor in this clause include the prime contractor and all subcontractors. (3) Added: Vehicle Usage (i) Contractor vehicles delivering food or water onto the installation are subject to inspection at entry control points. Vehicles making food and water deliveries on the installation will secure their vehicles when not attended to prevent unauthorized access and potential tampering. Vehicles making deliveries off the installation prior to arriving at the USAFA will ensure delivery vehicles remain locked when not attended. Failure to comply with these requirements may result in termination of vehicle access privileges. (ii) Contractors filling water trucks on the installation are only authorized to fill trucks from the non-potable hydrant outside Bldg 8034 and non-potable reservoir #3. The approved potable location is from the hydrant south of Bldg 8124, Snow Barn. Exceptions to these locations can be approved by 10 CES after coordination with 10 SFS. Any location where contractors are filling water trucks will have a back-flow preventor installed. (4) Added: Security Requirements. The contractor shall adhere to the installation security requirements as provided for in AFI 31-601, Industrial Security Program Management, USAFA supplement Chapter 2,Para 2.3 and 2.4; Chapter 7, Para 7.3; and Chapter 8) AFI 10-245, Air Force Antiterrorism (AT) Standards (Paragraphs 2.22, Atch 3), DoDI 2000.16, Department of Defense Antiterrorism Standards, Paragraphs E3.18 and E3.25). (i) Antiterrorism (AT). During increased Force Protection Conditions (FPCONs), entry requirements to the installation may change with little to no notice. During FPCON Charlie, contractors without a "C" on their CAB may be denied access. Depending on the incident or threat, all personnel to include contractors may be denied access to the installation for safety/security reasons. (I) Contractors are subject to spot checks or inspections of their vehicles and personal items at entry control points or facility access points during higher threats or during random antiterrorism measure checks. Failure to comply with these added security measures may result in denial of access to the installation. (II) Contractors are encouraged to receive Antiterrorism Awareness Training annually available at no cost, but it is not required in CONUS. Installation, Mission Element or the Unit Antiterrorism Representative (ATR) can provide this training when requested. Contractors can play an important role in protecting the installation and are encouraged to report suspicious activity to Security Forces by either calling 911 during emergencies or 333-2000. (ii) Operations Security (OPSEC): As applicable based on the scope and nature of the contract, the contractor shall comply with Government OPSEC guidance and training as prescribed in AFI 10-701, Operations Security, Chapter 4, paragraph 4.1 and AFI 33-332, Privacy Act, for handling of For Official Use Only (FOUO) information and HQ 10 ABW/CC Memorandum, USAFA Operations Security (OPSEC) Policy. Government provided OPSEC training is offered at no charge to the contractor. The contractor shall notify the applicable Unit OPSEC representative of the using activity receiving the contracted support, within one business day upon the discovery of any OPSEC violations (iii) Communications Security (COMSEC): The contractor shall comply with Government COMSEC requirements as contained in AFI 33-201V2, Communications Security, user requirements and USAFA COMSEC Manager guidance/directives. (5) Added: Prior to contractor employees providing services on the installation under this contract, the contractor shall validate that all contractor employees performing services on the installation are United States citizen or hold a valid resident alien status providing proof of alien registration with the Immigration and Customs Enforcement Service. (i) Background Checks. Prior to contractor personnel working on USAFA installation properties, the contractor shall agree that USAFA Security Forces may conduct a criminal history check, as applicable, on any or all employees performing on this contract. Criminal history checks may include accessing the appropriate state crime information center and national crime information center database to include, but not limited to, any state listed by the employee as current and past addresses. If this contract requires that any of the contractor's personnel must submit to a National Agency Check with Inquiries (NACI) background check, the Government shall bear the expense of that background check. Contractor employees found in violation of this process will be immediately removed from Academy grounds, are subject to barment, and will not be allowed to re-enter until completion of the CAB process. (ii) Convictions. Based on the results of the background check, any felony conviction in the past ten (10) years shall constitute indisputable grounds for the Contracting Officer (CO), with coordination from the 10th Air Base Wing Commander, to immediately require denial of access or removal of the employee from the effort under this contract. For felony convictions more than ten (10) years ago, the contractor may recommend the employee be retained on the contract. In addition, any misdemeanor conviction in the past five (5) years shall also constitute indisputable grounds, with coordination from the 10th Air Base Wing Commander, to restrict or immediately remove employees from effort under this contract. (I) Applicable convictions include: Murder; Assault with intent to commit murder; Espionage; Sedition (Conspiracy); Kidnapping or hostage taking; Treason; Rape or aggravated sexual abuse; Unlawful possession, use, sale, distribution, or manufacture of an explosive or weapon; Extortion; Distribution or intent to distribute a controlled substance; Illegal possession of a controlled substance; and Any felony conviction involving: Armed or unarmed robbery, Arson, Acts involving a threat, Willful destruction of property, Importation or manufacture of a controlled substance, Burglary or theft, Dishonesty, fraud, or misrepresentation, Possession or distribution of stolen property, Aggravated assault, Bribery, Violence at international airports (18 USC 37), or Conspiracy or attempt to commit any of the criminal acts listed above or any violations of immigration and naturalization laws. (II) Actions that involve restrictions or removal do not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (iii) Warrants. If during the course of the CABs processing, any contractor personnel are found to have an outstanding warrant, Security Forces may detain the contractor employee and may notify the appropriate law enforcement authorities. The 10th Air Base Wing Commander may issue a barment letter based upon the gravity of the offenses surrounding a warrant. (iv) Barment. Employees removed by the CO may also be subject to barment from entering the USAFA. (I) Barment appeals are processed through 10th Security Forces Squadron Commander to the 10th Air Base Wing Commander who may rescind the barment and permit the contractor employee to work on the installation. (II) Individuals have 30 days from the date of the initial contractor access denial letter to submit a justification in writing to 10 SFS/S5B, along with any notarized copies of court documents or other documents they determine necessary to rebut the disqualifying information. (III) In the case of a barment based on an outstanding warrant, the contractor may appeal the barment through the 10th Security Forces Squadron Commander to the 10th Air Base Wing Commander who may rescind the barment and permit the contractor employee to work on the installation. (IV) The CO may require the contractor to restrict the employee's use on this contract until the case is resolved. (V) Actions that involve barment do not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (b) See USAFA implementation procedures below. (1) Added: The contractor shall submit a letter to the CO specifying contractor personnel authorized to sign a USAFA Form 111, Application for Personnel and Vehicle Pass to Work Under Air Force Contract. The contractor shall submit a USAFA Form 111 on each contractor employee requiring access to the installation to perform work cited in the contract. All contractors require issuance of a CAB from the Pass and Registration Center (PRC). CABs will be issued to contractors performing duties on USAFA as identified on the USAFA Form 111 and who require weekly access to the installation for a period of time exceeding 7 days. If required access is less than 7 days, contractors are issued an AF Form 75, Visitor Pass. CABs will be issued for a performance period not to exceed one year. (2) Added: The CO, Contract Specialist (CS) or Sponsoring Official will endorse the USAFA Form 111 and the individual requiring the badge will hand-carry the original USAFA Form 111 to the PRC for processing. Badges processed by contractors themselves will not be accepted. Contractor personnel are required to prominently display their CABs in a visible location above their waist while visiting or performing work on the installation. The Contracting Office may restrict the contractor's employees from accessing the installation(s) until CABs are obtained. The CO will maintain a copy of all USAFA Form 111s accomplished for each contract for accountability of badges issued. (c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to work site. (1) Added: CABs shall be returned by the contractor to the PRC within 5 calendar days after the employee no longer requires access to the work site. (2) Added: Contractors are required to submit a letter to the CO immediately after employee(s) being terminated or otherwise leaving their employment on a contract. The letter shall contain the names(s) of the individuals(s) with their social security numbers. The CO will endorse the letter and forward it to PRC. The contractors shall collect CABs and return them to the PRC within 5 days. (3) Added: At the end of each performance period (i.e. options) and at the expiration of the contract, the contractor shall submit a letter to the CO containing the number of badges issued on each contract, the names of the individuals with their social security numbers, and identify those badges being returned. The CO will verify the names and number of badges on the letter utilizing their copy of the USAFA Form 111. The CO will maintain a copy of the letter and forward the contractor's original letter to PRC. By endorsement of the letter, the PRC will notify the CO of receipt of all badges or of any discrepancies. (4) Added: Denial of Access of Contractor Employees. The Government reserves the right to deny access of contractor employee(s) for substantiated misconduct (has the potential to jeopardize the mission, put themselves or others at risk, etc.) or security reasons. This action does not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Volume 1 Air Force Installation Security Program and AFI 31-501, Personnel Security Program Management, Paragraphs 3.24 and 3.27. (e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (f) Failure to comply with these requirements may result in withholding of final payment. (End of clause) 5352.201-9101 OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Kelly Snyder 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-2074 FAX 719-333-9018 email: Kelly.Snyder@usafa.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) 52.212-5 Contract Terms and Conditions required to Implement Statutes or Executive Orders-Commercial Items Deviation 52.219-6 Notice of Total Small Business Set Aside 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor -- Cooperation with Authorities and Remedies 52.222-26 Equal Opportunity 52.222-36 Affirmative Action for Workers with Disabilities 52.222-50 Combat Trafficking in Persons 52.225-13 Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim FAR 52.252-5-Authorized Deviations in Provisions, (Fill-In: Defense Federal Acquisition Regulation Supplements (DFARS)) FAR 52.252-6 -Authorized Deviations in Clauses, (Fill-In: Defense Federal Acquisition Regulation Supplements (DFARS)) DFARS 252.204-7004 Alt A-Central Contractor Registration DFARS 252.212-7001, Contract terms and Conditions required to implement status of Executive Orders applicable to Defense Acquisitions of Commercial Items (Deviation); includes 52.203-3, Gratuities and 252.232-7003, Electronic Submission of Payment Requests DFARS 252.225-7001, Buy American Act and Balance of Payments Program DFARS 252.225-7021, Trade Agreements DFARS 252.232-7003, Electronic Submission of Payment Request DFARS 225.247-7023, Transportation of Supplies by Sea DFARS 252-232-7003, Electronic Submission of Payment Requests and Receiving Reports Quotes must be received NLT 9:00 AM Mountain Standard Time, 19 March 2010 at 10 CONS/LGCA, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. Offers received after this date and time will be considered late in accordance with 52.212-1(f) and will not be evaluated. Delivery of the quoted items must be made not later than 19 April 2010 to the Air Force Academy (Jacks Valley), CO 80840. Quotes must be sent to Jason Allen, jason.allen@usafa.af.mil and Kimberly Wood, kimberlymae.wood@usafa.af.mil.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/DRU/10ABWLGC/FA7000-10-T-0028/listing.html)
Place of Performance: Address: USAF Academy (Jack's Valley), CO 80840, USAF Academy, Colorado, 80840, United States; Zip Code: 80840
Record: SN02093909-W 20100318/100316235558-d5ee4e657d084f4ea5cbe55772d0c459 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

56 -- Paneling Material, Building, Coiled Steel