Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF FEBRUARY 25, 2010 FBO #3015
SOLICITATION NOTICE

W -- Rental of one Portable Journal Turning Lathe and Power supply Motor.

Notice Date
2/23/2010
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
333512 — Machine Tool (Metal Cutting Types) Manufacturing
 
Contracting Office
N68836 FISC JACKSONVILLE, KINGS BAY DET 930 USS Hundley, Bldg 2012 Naval Submarine Base Kings Bay, GA
 
ZIP Code
00000
 
Solicitation Number
N6883610T0093
 
Response Due
3/5/2010
 
Archive Date
3/20/2010
 
Point of Contact
NINA A. MILLER 912-573-6963
 
Small Business Set-Aside
N/A
 
Description
This is a combined Synopsis/Solicitation for Commercial Items prepared in accordance with the Format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; Proposals are being requested and a written solicitation will not be issued. The Reference Number N4446610RC121FS is issued as a request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular 97-19. This solicitation is UNRESTRICTED. NAICS 333512. The Trident Refit Facility at Naval Submarine Base, Kings Bay, GA requires the following Item 0001: One Month Rental of Hydratight Portable Journal Turning Lathe. Model MS8JTL Module. Must be portable and capable of being installed on the machine shaft to be repaired. Consisting of hydraulically operated drive motor, tool blocks slide assembly, safety trip system, jack screws to center machine on shaft assemblies, hand tool kit and operating manual. Capable of machining shafts from four (4) inches to 8.875 Inches in diameter. Capable of 25 inch of machine area travel. Part Num: 903-1585. Item 0002: Hydraulic power supply with the following specifications: 20 HP Motor, Flow rate of 5.5 to 17.5 gallons per minute, Capable of maintaining pressure ranging from 0 to 200 PSI, Power requirements of 40 Amp, 3 Phase, 440 Volts. Enough hydraulic hoses to attach or operate turning lathe about 25 feet away, qty 1 each. Brand Name or Equal. If quoting an Equal To, must supply specifications with your quote. Period of Rental will be 03 May 2010 thru 02 Jun 2010. The following Provisions apply: 52.204-7 Contractor Registration; 52.211-6 Brand Name or Equal; 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offeror Representations and Certifications-Commercial Items; 52.212-4 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items; 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, and Citing: 52.204-7, 52.222-26, 52.222-35, 52.222-36, 52.222-37, and 52.232-36 Credit Card Payment; and 252.204-7004 Central Contractor Registration; 252.212-7001 Contract Terms and Conditions Required To Implement Statutes Applicable to Defense Acquisition Of Commercial items, and Citing:252.225-7001. Offers are Due by close of business on 05 MAR 2010 and may be faxed to 912-573-2659 or email to nina.miller@navy.mil).
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N68836FJDPEN/N6883610T0093/listing.html)
 
Record
SN02072210-W 20100225/100223234630-6fa374f2be3af41734927029d6d88d2e (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.