MODIFICATION
59 -- Audio Visual Equipment
- Notice Date
- 9/22/2009
- Notice Type
- Modification/Amendment
- Contracting Office
- 1001 761st Tank Battalion Ave,, FORT HOOD, TX 76544
- ZIP Code
- 76544
- Solicitation Number
- W45CMJ92112001A
- Response Due
- 9/24/2009
- Archive Date
- 3/23/2010
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W45CMJ92112001A and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 443112 with a small business size standard of $9.00M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-24 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Hood, TX 76544 The USA ACA Fort Hood requires the following items, Meet or Exceed, to the following: LI 001, LCD Projector,Mitsubishi 6000 Lumen, LCD Projector Model: XL6600 U/LU; Specifications: General Device Type: LCD projector Built-in Devices: Speaker Width: 17.1 in Depth: 17.4 in Height: 6.9 in Weight: 19.8 lbs Projector / Panel Image Brightness: 5500 ANSI lumens Image Contrast Ratio: 600:1 Image Size: 5 ft - 25 ft Projection Distance: 7.5 ft - 40 ft Resolution: 1024 x 768 Native Aspect Ratio: 4:3 Color Support: 24-bit (16.7 million colors) Lamp Type: 270 Watt Lamp Life Cycle: 2000 hour(s) Features: Picture in picture, ColorView Natural Color Matrix, 3D CineView Projector Lens System Lens Aperture: F/1.8-2.1 Video Input Analog video format: PAL-M, PAL-N, PAL, NTSC 4.43, PAL 60, NTSC, SECAM Analog video signal: Composite video, RGB, S-Video, Component video Digital Television Video Formats: 525p, 1080i, 720p Video Output Analog video signal: RGB Video Input DeviceType: None Audio Input Type: None Audio Output Type Speakers: Integrated Sound Output mode: Mono Sound Output Power per Channel: 5 Watt Speaker(s): 1 Mixed channel Input Device Type: Remote control - External - Wireless Expansion / Connectivity Interfaces: 1 x Composite video input - BNC, 1 x Audio line-in - RCA X 2, 2 x Serial RS-232C - 8 pin mini-DIN ( Management ), 1 x Component video / RGB input - BNC X 5, 1 x Audio line-out - Mini-phone 3.5 mm, 1 x Audio line-in - Mini-phone 3.5 mm, 1 x S-video input - 4 pin mini-DIN, 1 x Remote control input, 1 x VGA output - 15 pin HD D-Sub (HD-15), 1 x S-video input - BNC X 2, 1 x USB - 4 pin USB Type B, 1 x Composite video input - RCA, 1 x VGA input - 15 pin HD D-Sub (HD-15), 1 x Remote control output, 1, EA; LI 002, Projector Mount ; Model: XL5950CM; Specifications: Ceiling projector mount for the Mitsubishi 6000 Lumen, LCD Projector, 1, EA; LI 003, Altinex Video Distribution Amplifier; Model: DA 1706SV; Specifications: 1-In 6-Out distribution amplifier designed to allow the simultaneous connection of a single C-Video source, 1, EA; LI 004, Kramer Dual Scaler Seamless Switcher; Model: VP-727; Specifications: INPUTS: 8 sets of universal BNC connectors: R/Pr, G/Y/CV, B/Pb/C, Hs/Cs, and Vs, each programmable for use as CV, YC, RGB, YCbCr, YPbPr, RGBS or RGBHV. PREVIEW OUTPUT: 1 x DVI-D on a DVI-I connector. 1 x VGA (VGA through UXGA) on a 15-Pin HD F connector. 1 x RGBHV / YPbPr on BNC connectors. PROGRAM OUTPUT: 1 x DVI-D on a DVI-I connector. 1 x VGA (VGA through UXGA) on a 15-Pin HD F connector. 1 x RGBHV / YPbPr on BNC connectors., 1, EA; LI 005, Kramer Dual Scaler Seamless Switcher Remote; Model: VP-727T; Specifications: All the front panel controls of the Seamless Switcher are replicated. Convenient Switching Control: T-Bar or Take button with selectable transition speed control. Menu Button: Switcher Control via on-screen display on Preview output. Wipe Direction Control: Via front panel buttons. Control Multiple Units: Up to 4 Seamless Switchers can be controlled from one Switcher Remote., 1, EA; LI 006, Pelco, Video Camera; Model: Esprit Series ES3012; Video Camera Optics Specifications: Signal Format: NTSC or PAL Scanning System: 2:1 Interlace 2:1 Interlace Image Sensor Effective Pixels: 1/4-inch EXview HAD NTSC: 768 (H) X 494 (V) PAL: 752 (H) X 582 (V) Horizontal Resolution: NTSC>540 TV Lines PAL>470 TV Lines Lens: f/1.4 (focal length, 3.4~119 mm) Zoom: 35X optical, 12X digital Zoom Speed (optical range): 3.2/4.6/6.6 seconds 2.9/4.2/5.8 seconds Horizontal: 55.8 at 3.4 mm wide zoom Angle of view: 1.7 at 119 mm telephoto zoom Focus: Automatic with manual override Maximum Sensitivity @35IRE NTSC/EIA 0.55 lux at 1/60 sec (color) 0.063 lux at 1/4 sec (color) 0.00018 lux at 1/2 sec (B-W) PAL/CCIR 0.50 lux at 1/50 sec (color) 0.062 lux at 1/3 sec (color) 0.00014 lux at 1/1.5 sec (B-W) Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync White Balance: Automatic with manual override Shutter Speed: NTSC Automatic (electronic iris)/Manual 1/2 ~1/30,000 PAL Automatic (electronic iris)/Manual 1/1.5 ~1/30,000 Iris Control: Automatic Iris Control with manual override., 2, EA; LI 007, Pelco, PTZ Controller; Model: KBD4000; Specifications: A full-function, desktop keyboard controller that can be used in a variety of applications. A barrel-type joystick provides precise pan and tilt control of fixed speed and variable speed receivers. Twisting the joystick clockwise or counter clockwise zooms the lens in or out,, 1, EA; LI 008, Pelco, Keyboard Kit, Model: KBDKIT, 1, EA; LI 009, Marshall, 4 Screen Rack Mount Video Monitor; Model: Marshall V-R44P; Specifications (Quad): Rack mountable unit that offers four 4" high-resolution active matrix LCD panels. Each of the four 480 x 234 pixel screens has its own set of controls for color, tint, contrast, and brightness. Each panel has its own input with active loop-through feature, a 3 color tally system, and auto-recognition of NTSC or PAL formats. This unit is only 2U high, can be tilted up to 100 degrees while rack mounted, and is the smallest video monitoring system of its kind. All V-R Series models are constructed of steel and aluminum, and include a power supply. Display Viewing Area: 4: (3.23 x 2.43), 2, EA; LI 010, Delvcam, 2 Screen Rank Mount Video Monitor; Model: DELV-2LCD-7XLS; Specifications (Dual): DISPLAY: 7 active matrix TFT-LCD (16:9) BACK LIGHT: Internal CCFT DOT MATRIX: 0.129 (H) x 0.447 (V) RESOLUTION: 1440 Horizontal x 234 Vertical BRIGHTNESS: 300cd/m2 (NIT) CONTRAST: 150:1 VIEWING ANGLE: U: 15 / D: 35, R / L: 50 PIXEL CONFIGURATION: Striped VIDEO SIGNAL: 1Vpp into 75Ω Terminated & Looping Input STANDARD: NTSC-M POWER REQUIREMENTS: 110-220VoltsAC50/60 cycAuto switching, 14watts OPERATING TEMPERATURE: 32-122 Degrees F (0-50C) REMOTE CONTROL: Handheld Infrared DIMENSIONS: 19"W x 4.5"D x 7"H (4RU) WEIGHT: 16.0 Lbs, 1, EA; LI 011, Microboards Technology 10 Disc DVD/CD Duplicator; Model: LS-DVD PRM PRO10; Specifications: Burn Speed: DVD 18X, CD 52X (Selectable recording Speed) Supported Formats: DVD-Video, DVD-ROM, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD-DL,CD-DA (Red Book), CD-ROM Modes 1 & 2, XA Forms 1 & 2, ISO 9660, Photo CD, CD-Extra, Mixed Mode, Video CD, Hybrid CD, HFS Connectivity: Standalone; PC-connect upgrade available, 1, EA; LI 012, Vbaluns Video Baluns, Model: VBP-FMALE-RJ45, Specifications: 12V & video over CAT5 w/RJ45, 2, EA; LI 013, Blander Tongue Lab, Blonder Tongue RF Modulator; Model: BAVM-860SAW; Specifications: Input: Video: 1V p-p @ 75 ohms Audio: 1V RMS @ 47K ohms Video Performance: Differential Gain: 4% Differential Phase <4 Degrees Signal to Noise: 55dB RF Output: Standard: UHF- CATV Channel Ranges: 14-64 and 65-125 (excluding 95-99) Output Level: +25 dBmV (90dBuV) IM Distortion: -60 dBC Alternate Channel: -41dBC @12 MHz, 2, EA; LI 014, Yamaha, Digital Audio Mixing Console, Model: LS9-32; Specifications: Shall have 32 mono mic/line input channels plus 4 stereo input channels, expandable up to 32 or 64 channels in two layers. 16 mix buses, 8 matrix buses, plus stereo and mono buses with LCR mode. Top-performance analog mic/line preamplifiers. Color LCD display and logically arranged encoders. Extensive gating, compression, and equalization facilities. Built-in USB memory recorder/player for recording or BGM playback. Virtual Rack with effects and EQ for just about any processing requirements. Scene memory for instant store and recall of all console parameters, including head amp gain. Advanced access management includes user keys (standard USB memory devices) that can be issued with different access levels for different users. Editor Software for enhanced operability and programmability. Internal Processing: 32bit (Accumulator=58bit) Sampling frequency rate: Internal: 44.1kHz, 48kHz External: 44.1kHz (-10%) to 48kHz (+6%) Signal delay: Less than 2.5ms (INPUT to OMNI OUT @48kHz) Total harmonic distortion Input Gain=Min: CH INPUT to OMNI OUT Less than 0.05% 20Hz to 20kHz Frequency response: CH INPUT to OMNI OUT 0, +0.5, -1.5dB 20Hz to 20kHzDynamic range (Maximum level to noise level):110dB, DA Converter (OMNI OUT) 108dB, AD+DA (OMNI OUT) Hum & noise level: -128dB, Equivalent input noise (20-20kHz, Rs=150ohms, Input Gain=Max) -84dB, Residual noise Crosstalk (@1kHz) Input Gain=Min: -80dB, Adjacent input channels -80dB, Input to output Power requirements: 110V-240V, 50/60Hz Power consumption: 32 Channel 170 Watts 16 Channel 95 Watts Weight: 32 Channel: 19.4kg, 16 Channel: 12.0kg Analog Input Characteristics Input: 1-16 or 1-32 Gain: -62dB to +10dB Actual Load Impedance: 3K ohms Input Level Sensitivity: -82dBu to -10dBu Nominal: -61dBu to +10DBu Max Before Clip: -42dBu to +30dBu Connector Type: XLR Analog Output Characteristics OMNI OUT 1-32 Impedance: 32ohms Gain SW +24dB Nominal: +4dBu Max Before Clip: +24dBu Connector Type: XLR PHONES OUT Impedance 15ohms Nominal: 75mW Max Before Clip: 150mW Connector Type: Stereo ‖ Phone Jack Digital Output Characteristics Terminal: (2) 2TR In Digital Coaxial & 2RT Out Digital Coaxial Format: IEC60958 Data Length: 24bit Level: 0.5Vpp/75ohms Connector: RCA pin jack Control I/O Characteristics Terminal: Network (Ethernet) Format: 100 Base-T Connector: RJ-45 Terminal: MIDI IN and MIDI OUT Connector: DIN-5Pin x2 Terminal: WORD CLOCK IN Level: TTL/75ohms, Terminated Connector: BNC WORD CLOCK OUT Level: TTL/75ohms Connector: BNC Terminal: Lamp Level: 0-12V Connector: XLR-4-31 Type Terminal: USB HOST Format: USB1.1 Level: USB Connector: A Type USB., 1, EA; LI 015, Yamaha, Digital Audio Mixing Console, Model: LS9-16; Specifications: Shall have16 mono mic/line input channels plus 4 stereo input channels, expandable up to 32 or 64 channels in two layers. 16 mix buses, 8 matrix buses, plus stereo and mono buses with LCR mode. Top-performance analog mic/line preamplifiers. Color LCD display and logically arranged encoders. Extensive gating, compression, and equalization facilities. Built-in USB memory recorder/player for recording or BGM playback. Virtual Rack with effects and EQ for just about any processing requirements. Scene memory for instant store and recall of all console parameters, including head amp gain. Advanced access management includes user keys (standard USB memory devices) that can be issued with different access levels for different users. Editor Software for enhanced operability and programmability. Internal Processing: 32bit (Accumulator=58bit) Sampling frequency rate: Internal: 44.1kHz, 48kHz External: 44.1kHz (-10%) to 48kHz (+6%) Signal delay: Less than 2.5ms (INPUT to OMNI OUT @48kHz) Total harmonic distortion Input Gain=Min: CH INPUT to OMNI OUT Less than 0.05% 20Hz to 20kHz Frequency response: CH INPUT to OMNI OUT 0, +0.5, -1.5dB 20Hz to 20kHzDynamic range (Maximum level to noise level):110dB, DA Converter (OMNI OUT) 108dB, AD+DA (OMNI OUT) Hum & noise level: -128dB, Equivalent input noise (20-20kHz, Rs=150ohms, Input Gain=Max) -84dB, Residual noise Crosstalk (@1kHz) Input Gain=Min: -80dB, Adjacent input channels -80dB, Input to output Power requirements: 110V-240V, 50/60Hz Power consumption: 32 Channel 170 Watts 16 Channel 95 Watts Weight: 32 Channel: 19.4kg, 16 Channel: 12.0kg Analog Input Characteristics Input: 1-16 or 1-32 Gain: -62dB to +10dB Actual Load Impedance: 3K ohms Input Level Sensitivity: -82dBu to -10dBu Nominal: -61dBu to +10DBu Max Before Clip: -42dBu to +30dBu Connector Type: XLR Analog Output Characteristics OMNI OUT 1-32 Impedance: 32ohms Gain SW +24dB Nominal: +4dBu Max Before Clip: +24dBu Connector Type: XLR PHONES OUT Impedance 15ohms Nominal: 75mW Max Before Clip: 150mW Connector Type: Stereo ‖ Phone Jack Digital Output Characteristics Terminal: (2) 2TR In Digital Coaxial & 2RT Out Digital Coaxial Format: IEC60958 Data Length: 24bit Level: 0.5Vpp/75ohms Connector: RCA pin jack Control I/O Characteristics Terminal: Network (Ethernet) Format: 100 Base-T Connector: RJ-45 Terminal: MIDI IN and MIDI OUT Connector: DIN-5Pin x2 Terminal: WORD CLOCK IN Level: TTL/75ohms, Terminated Connector: BNC WORD CLOCK OUT Level: TTL/75ohms Connector: BNC Terminal: Lamp Level: 0-12V Connector: XLR-4-31 Type Terminal: USB HOST Format: USB1.1 Level: USB Connector: A Type USB., 1, EA; LI 016, Tascam, DVD/CD Player, Model: DV-D01U, Specifications: General Power requirements: AC 120V, 60Hz (US, Canada, Mexico) AC 230V, 50Hz (Europe) AC 230V, 50Hz (Australia) Power consumption: 11W (at operation) 0.2W (in standby mode) Dimensions (W x H x D): 19" x 2" x 10.6" (482 x 51 x 269 mm) Weight: 5.1 lbs (2.3 kg) Audio section Analog output: Audio out: -8 dB/1 k Digital output*: Digital out (optical): -21 dBm to -15 dBm (660 nm 30 nm) * Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency - 32 kHz, 44.1 kHz, 48 kHz) Video section Video system: NTSC Horizontal Resolution: 500 lines Signal-to-Noise Ratio: 64 dB Video output level Composite: 1.0 V (p-p)/75 S-video-Y: 1.0 V(p-p)/75 S-video-C: 0.286 V (p-p)/75 Component-Y: 1.0 V (p-p)/75 Component-Pb/Pr: 0.7 V (p-p)/75 HDMI HDMI Output (Ver. 1.1): HDMI RS-232C Serial command: 9-Pin D-SUB 1U rack-mountable single disc player with a powered loading tray. The DVD player reads DVD Video, DVD Audio (2-channel only), Video CD, CD-DA, MP3, WMA, WAV, JPEG, ASF, MPEG-2/MPEG-1, and DivX, 2, EA; LI 017, Tascam, DVD/CD Recorder; Model: DV-RA1000HD; Specifications: This device is a three-in-one video recorder that combines (3) all-digital formats of MiniDV, 250GB HDD, and DVD in a compact package complete with A-D encoding as well as various editing and dubbing capabilities. DV native format recording to HDD can be performed, allowing the unit to make exact copies of DV tapes. The model is equipped with an RS-232C interface to further enhance system applications. Thanks to these advantages, this unit is ideal for professionals as it makes media duplication and professional archiving of existing analog footage easier than ever. Easy to use and connect. No complicated wiring, 1, EA; LI 018, Shure, System Processor, Model: P4800; Specification: System Processor The primary interface for this device is a Windows-based software program that mimics the functional block diagrams used in sound system design. The processing blocks shall be applied in any order, to any input or output. Processing blocks shall be able to be copied and pasted to duplicate processors across multiple channels. The device shall allow real-time design changes, so processing blocks can be added, removed or changed during system tuning. The security options shall allow complete lock of the system to prevent undesired tampering or to restrict user access to certain parts of the system. Control input pins shall allow connection of potentiometers, contact closures, for remote control of preset changes, volume, and muting, 1, EA; LI 019, Shure, Digital Remote Switch, Model: DRS-10; Specifications: Hardware Adapter: Communicates directly with DFR11EQ Version 5 by converting the analog signal generated by the switch into digital RS-232. Adapter plugs directly into the RS-232 serial port on back panel of the DFR hardware unit. The Switch Assembly: Consists of a 10-position switch that can be customized to select up to 10 scene presets., 1, EA; LI 020, Shure, Digital Audio Processor, Model: DFR22; Specification: The programmable graphic equalizer shall consist of four independent channels of 24 bit digital graphic equalization. Each channel shall consist of 28 bands centered on standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 31Hz to 16kHz. The range of equalization per band shall be 15dB in 0.5dB increments. The equalizer shall have a gain of unity with all bands set at zero, and shall have a maximum in/out level of +20dBu. Frequency response shall be.25dB 20Hz to20kHz. Dynamic Range shall be greater than 110dB (20-20KHz, unweighted) and SMPTE intermodulation distortion or THD shall be less than 0.01% at 1KHz, +20dBu. Input impedance shall be 18K ohms balanced. Output impedance shall be 200 ohms. Inputs and outputs shall be balanced type on XLR and 1/4" phone jacks. Individual filters shall be of a constant Q reciprocal filter design. Boost and cut characteristics shall be fully symmetrical. The equalizer shall also include on each channel a 24dB per octave high pass filter adjustable from 20Hz to 10.6KHz, a 24dB per octave low pass filter adjustable from 33Hz to 20KHz, a full function, pre/post switchable compressor/limiter with adjustable threshold, ratio, attack and release controls, and a time delay capable of a maximum of 1.364 seconds adjustable in 20us increments, 1, EA; LI 021, Crown, Power Amplifier, Model: Xti 4000; Specifications: XTI-Series amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more. With their powerful, reliable performance, XTI-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Dimensions: 3.5 x 19 x 12.25 inches, 1, EA; LI 022, Crown, Power Amplifier, Model: Xti 2000; Specifications: Power Rating: Stereo: 1000W/Ch @ 2 Ohms, 475W/Ch @ 8 Ohms; Bridge Mono: 2000W @ 4 Ohms, 1600W @ 8 Ohms Voltage Gain at 1kHz, 8 ohm rated output: XTi 1000: 30.5 dB, XTi 2000: 32.9 dB, XTi 4000: 34.2 dB. Frequency Response: 0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms. Phase Response (at 1 watt, 20 Hz to 20 kHz): 15. Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. Sensitivity: 1.4V Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 105 dB (A weighted). Damping Factor: Better than 500 from 20 Hz to 500 Hz. Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz. Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz. Input Stage: Input is electronically balanced and employs precision 1% resistors. Input Impedance (nominal): 20 k ohms, balanced; 10 k ohms, unbalanced. Maximum Input Signal: +22 dBu typical. AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz. AC Line Current: XTi 2000: 6.9A. At Idle: Draws no more than 90 watts. Operating Temperature: 0 C to 40 C at 95% relative humidity (non-condensing)., 1, EA; LI 023, SoundBridge Acoustic Lab, Main Loudspeaker Series 4000, Model: SB4112HT; Specifications: Cabinetry The cabinet design shall use13 ply 3/4 high quality Baltic birch plywood with dado joints, recessed baffle and a 16 gauge front perforated grill for long lasting durability. The baffle is cut from 1 MDF to enhance acoustical properties and to give the components a rigid interface. Two Neutrik Speakon connectors shall be installed. The loudspeaker shall have integral suspension points for permanent overhead rigging. Transducers The two-way cabinet shall be loaded with a 12 cast aluminum low frequency driver and a 1 titanium high frequency compression driver, 4, EA; LI 024, Soundbridge Acoustic Labs, monitor loudspeaker Series 4000, Model: SB4112W; Specifications: Cabinetry The cabinet design shall use13 ply 3/4 high quality Baltic birch plywood with dado joints, recessed baffle and a 16 gauge front perforated grill for long lasting durability. The baffle is cut from 1 MDF to enhance acoustical properties and to give the components a rigid interface. Two Neutrik Speakon connectors shall be installed. Transducers The two-way cabinet shall be loaded with a 12 cast aluminum low frequency driver and a 1 titanium high frequency compression driver. The titanium high frequency driver shall be coupled with a durable cast horn for proper dispersion. The cabinet shall be tuned by means of a vented port set at the optimum frequency, 4, EA; LI 025, Ellipsoidal Stage Lights, Lighting Fixture, Model: ELFLEV; Specifications: General The instrument shall be a ellipsoidal spotlight or approved equal. Physical The spotlights are constructed of rugged, die cast aluminum, free of burrs and pits, finished in black, high temperature epoxy paint. The spotlight shall provide, but not be limited to: Rugged die-cast aluminum construction Ten interior baffles to eliminate beam scattering and spill light. Thermally insulated, precision focus knob. A sealed reflector housing that shall prevent all light leaks. 17 heat-sink fins cast into the reflector housing for temperature control. Integral cable clamp for power leads. A brass self-retaining screw to retain the lamp socket Sturdy gel frame holders with two accessory slots and a top mounted, quick release gel frame retainer. Rugged steel yoke with 300+ rotation of fixture within yoke Positive locking, hand operated yoke clutch. Unit shall be nominally 11long by 10 wide. Unit shall not weigh more than 8.5 pounds (without c-clamp). The spotlight shall be UL and cUL listed and so labeled. Electrical The unit shall have an operating range of 115-240V, 50/60Hz. The unit shall be capable of using a maximum of 750W HPL lamp. The three conductor, 36 leads shall be rated for high temperature and encased in a glass fiber outer sleeve. The unit shall be capable of utilizing ETC Dimmer Doubling technology. Lamp The instrument shall use only one lamp type, the HPL lamp. Fixtures that require the purchasing of multiple lamp types to achieve different field angles shall not be acceptable. The lamp shall: Be an HPL lamp consisting of a compact tungsten filament, contained in a krypton-filled quartz envelope Mount axially within the reflector and shall be pre-focused within the reflector. Have an integral die cast aluminum heat sink that reduces seal temperature and ensures proper lamp alignment. Use an ATP 220 nickel gold plated socket. Lenses Lens sets shall consist of two patented wave lenses. One clear and one stippled. Lenses shall be heat resistant, borosilicate glass. Beam orientation of 25-45 (spot to flood) shall be possible through rotation of exterior rotation knob connected to a rotatable collar housed in the front of the unit. Fixtures which require user to reposition the lamp socket to change the beam angle shall not be acceptable. Optical The optical train shall combine a compact filament lamp with modified parabolic and multifaceted reflector. Reflector finish shall be an Enhanced Aluminum deposition. Reflector shall be cast into a heat sink assembly. Reflector efficiency shall be a minimum of 93%. Reflectors of p -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/DABK/DABK15/W45CMJ92112001A/listing.html)
- Place of Performance
- Address: Fort Hood, TX 76544
- Zip Code: 76544
- Zip Code: 76544
- Record
- SN01965261-W 20090924/090923001230-e17c3a859852dae1b9dfcf35b2369c33 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |