SOLICITATION NOTICE
71 -- Director of Logistics-shelving
- Notice Date
- 9/12/2009
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- NTC ACQUISITION COMMAND, FORT IRWIN, CA 92310
- ZIP Code
- 92310
- Solicitation Number
- W80WLM92170001
- Response Due
- 9/14/2009
- Archive Date
- 3/13/2010
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W80WLM92170001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 337124 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-14 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT IRWIN, CA 92310 The USA ACA Fort Irwin requires the following items, Meet or Exceed, to the following: LI 001, Rolling Safety Ladder Rolling Safety Ladder rolls easily to and from work areas. 1" steel tube frame and handrails provide structural support. Handrails is 30" high on 4-12 step ladders with 26" D top platform. The base is 42"W by 87"D. 7" deep stairs have perforated tread for general duty use. Step ladder has four casters with floor locking mechanisms. Ladder is protectively packaged to prevent damage during shipping so some assembly required., 1, EA; LI 002, Pallet Rack Shelving System includes Upright Frames, Heavy Duty Load Beams, Pallet Supports, Column Protectors and Sheet Pywood. Shelving units will be completely installed in the building to include bolting to the floor in compliance with the California Seismic Zone 4 requirements under the UBC 2007 Edition as adopted by the County or San Bernardino, C, 1, EA; LI 003, Upright Frames and SupportUpright Frame - ILOS, 48x180, 19-each Upright Frame - ILOS, 48x120, 3-each Upright Frames & Supports, 3 eachHeavy Duty Load Beams, 94x4 1/8 Heavy Duty Load Beams, 108x5, 96-eachHeavy Duty Load Beams 120x5, 24-each Pallet Supports, 48" length, 276-each Column Protectors, 24" High, 10-eachlevel Plywood, Cut to Fit, 3/4, 66 each, 1, EA; LI 004, Bollard and Guard Rail/Track ProtectorsHeavy Duty Bollard will be anchored into the floor providing protection from vehicular traffic penetrating the cage from the short wall angle. The Guard Rails are also anchored to the floor providing protection to the caged area from the longest exposed side from vehicular traffic. The Door Tract Protectors are floor anchored and protect the track on the roll up door from damage also from vehicular traffic moving in and out of the warehouse area., 1, EA; LI 005, Work Benches, Cabinetry, Light Duty ShelvingLight Duty Shelving for use just inside the roll up door in support of the vehicles (Truck/Forklifts) utilizing this area for extra rachet straps and marking instruments that are used on a daily basis. The 2 work benches, 60"Lx30"D and 14 Floor Cabinets, 36"Wx24"Dx78"H will be utilized inside the warehouse and the controlled fenced area while/for performing Technical Inspections and storage of sensitive Items as they are received from the CRP warehouse prior to issue or prior to turn-in or shipping off the installation., 1, EA; For this solicitation, USA ACA Fort Irwin intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Fort Irwin is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/DABK/DABK17/W80WLM92170001/listing.html)
- Place of Performance
- Address: FORT IRWIN, CA 92310
- Zip Code: 92310
- Zip Code: 92310
- Record
- SN01952471-W 20090914/090912234029-b81cc9c5bd11c38a1dd45bf4a6e88f29 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |