Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 27, 2009 FBO #2833
MODIFICATION

58 -- Stage monitor and speaker system

Notice Date

8/25/2009
 

Notice Type

Modification/Amendment
 

Contracting Office

101 Bloxon St Bldg 205 Rm 213, Fort Myer, VA 22211
 

ZIP Code

22211
 

Solicitation Number

W91QF7-09-T-0199
 

Response Due

8/25/2009
 

Archive Date

2/21/2010
 

Point of Contact

Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
 

E-Mail Address

clientservices@fedbid.com;
 

Small Business Set-Aside

Total Small Business
 

Description

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W91QF7-09-T-0199 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 334290 with a small business size standard of 750.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-08-25 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Myer, VA 22211 The USA ACA Fort Belvoir, Capital District Contracting Center requires the following items, Brand Name or Equal, to the following: LI 001, M4 Monitor NL-4 Item#AE01, Part# Z0800.001. The M4 is a 2-way high performance stage monitor that produces 134 / 138 dB SPL when driven passively with the D6 / D12 respectivly or 140 dB SPL when driven actively with the D12. The constant directivity dispersion of 50 x 70 (h x v) delivers an accurately defined coverage area on stage and when used upright it is transformed into a powerful PA system with a dispersion suitable for a variety of applications. The M4 cabinet is constructed from marine plywood, which incorporates the handles, and has an impact resistant paint finish. It has two M10 threaded inserts on each side panel to enable quick and flexible rigging and a socket to accept loudspeaker stands. Two runners recessed in the bottom panel protect the cabinet from scratching and prevent movement., 4, EA; LI 002, E12D Loudspeaker NL-4 Item # AE02, Part# Z0602.001. The E12 and E12-D are high performance two-way multipurpose loudspeakers employing an integrated coaxial driver. The E12 and E12D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and with the addition of an E15X subwoofer can also easily reproduce high level music program. The multi faceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80 x 50 dispersion pattern (h x v), while the E12-D has a wider 110 x 50 pattern. The horns in both loudspeakers are easily rotatable through 90 providing 50 x 80 or 50 x 110 dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket. Components 12" / 1.3" Max. sound pressure E12 / E12-D with D6 131 / 130 dB SPL Max. sound pressure E12 / E12-D with D12 134 / 133 dB SPL Power handling capacity (RMS / peak 10 ms) 300 / 1600 W Frequency response (-5 dB) 50 / 100 Hz - 18 kHz Nominal dispersion angle (h x v) E12 / E12-D 80 x 50 CD / 110 x 50 CD Cabinets per channel D6 / D12 2 / 2 Dimensions mm (h x w x d) 580 x 350 x 334 Weight kg 16 Dimensions inch (h x w x d) 22.8 x 13.8 x 13.2 Weight lb 35.3, 6, EA; LI 003, E12D Flying Bracket Item # AE03, Part#Z5352.000, 6, EA; LI 004, Loudspeaker Stand Adapter Item# AE05, Part#Z5034.000, 6, EA; LI 005, E8 Loudspeaker NL-4 Item# AE05, Part# Z0620.001. The E8 is a high performance two-way multipurpose loudspeaker employing an integrated coaxial driver. The E8 can be used for speech and music applications as a stand-alone full range system, or incorporated into larger distributed sound reinforcement situations; d&b subwoofers may also be used to increase system bandwidth. The multi faceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The 90 x 50 dispersion pattern (h x v) of the horn is easily rotatable through 90 to provide a 50 x 90 dispersion pattern. The E8 cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handle and a socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket. Components 8" driver / 1" compression driver with rotatable horn Max. sound pressure (1 m, free field) with D6 / D12 126 / 129 dB SPL Power handling capacity (RMS / peak 10 ms) 150 / 800 W Frequency response (-5 dB) 62 / 120 Hz - 18 kHz Nominal dispersion angle (h x v) 90 x 50 CD Cabinets per channel D6 / D12 4 Dimensions mm (h x w x d) 390 x 232 x 223 Weight kg 7.3 Dimensions inch (h x w x d) 15.4 x 9.1 x 8.8 Weight lb 16, 4, EA; LI 006, D12 Amplifier NL-4 w/ Power CableFFPItem# AE06, Part# Z2600.001.The d&b D12 amplifier is a dual channel amplifier incorporating digital signal processors (DSP) to provide loudspeaker specific configurations and functions. It is designed for use with all d&b loudspeakers, has both digital and analog signal inputs as well as link outputs, remote control and monitoring capabilities and sophisticated protection circuits. It utilizes an autosensing switch mode power supply for mains voltages 115 / 230 V, 50 ? 60 Hz (optional 100 / 200 V) and has a temperature and signal controlled fan to cool the internal assemblies. It is specifically designed to produce high power into low impedance loads, typically those between 4 and 16 ohms. A user definable 4-band parametric equalizer, and signal delay capability of up to 340 ms are incorporated and can be applied independently to each channel. A signal generator offering pink noise or sine wave program is also included. The D12 uses its Load monitoring and System check functions to ascertain the status of the loudspeaker impedance. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively. Apart from selectable output configurations for dual channel, mixed TOP/SUB and 2-Way Active mode, the D12 also provides d&b SenseDrive for use with the LF drivers in d&b active loudspeakers and subwoofers and has output connector options. All these functions and parameters can be easily accessed and controlled via the LCD in conjunction with the digital rotary encoder or through the d&b Remote network. Rated output power (THD+N < 0.1%) 2 x 750 W into 8 ?, both channels are driven 2 x 1200 W into 4 ?, both channels are driven S/N ratio (unweighted, RMS) > 110 dBr D12 Connectors INPUT/LINK ANALOG A/B 3 pin XLR female/male INPUT/LINK DIGITAL AES/EBU 3 pin XLR female/male Sampling rate 48 kHz / 96 kHz OUT CHANNEL A/B Optional EP5/NL4/NL8 REMOTE 2 x RJ 45 parallel SERVICE SUB-D9 female D12 Digital Signal Processing Sampling rate 96 kHz / 27 Bit ADC / 24 Bit DAC Basic delay / latency analog input 0.3 ms D12 Power supply Autosensing switch mode power supply for 115/230V, 50 - 60 Hz optional 100/200V, 50 - 60 Hz Mains connector PowerCon? D12 Remote network Remote network CAN-Bus D12 Dimensions, weight Height x width x depth 3 RU x 19" x 353 mm / 13.9" Weight 13 kg / 29 lb, 4, EA; LI 007, R60 USB to CAN Interface Item# AE07,Part# Z6118.000, 2, EA; LI 008, Case x 2 E12 w/casters Item# AE08, Part # E7445.000, 3, EA; LI 009, Case x E8 w/casters Item# AE09, Part # E7447.000, 1, EA; LI 010, LM Engineering Case 2 x M4 3/8" construction w/label dish. Item# AE10, Part# OPAM4x2, 2, EA; LI 011, LM Engineering Pocket rack 12U Includes: 2" Edison" plug AC boxes w/10' leads and one (1) 3U storage drawer and label dish. Item# AE11, Part# OPAAR12U, 2, EA; LI 012, Custom hinged I/O panel per spec with two cooling fans, Item# AE12, Part# CSPANEL, 2, EA; LI 013, Rack wiring Terminate CAN BUS and amplifier I/O connections from I/O panel (item AE12). Includes trimming leads to proper length, label wrapping all leads from I/O panel, securing all leads with cable ties., 2, EA; LI 014, Freight, 1, LOT; For this solicitation, USA ACA Fort Belvoir, Capital District Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Fort Belvoir, Capital District Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USA/DABJ/DABJ03/W91QF7-09-T-0199/listing.html)
 

Place of Performance

Address: Fort Myer, VA 22211

Zip Code: 22211-1236
 

Record

SN01926099-W 20090827/090826001353-0e9f03d451f96097e1d2a5571aab7207 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |