MODIFICATION
54 -- Prefabricated Guard Booth - Drawings
- Notice Date
- 7/17/2009
- Notice Type
- Modification/Amendment
- NAICS
- 332311
— Prefabricated Metal Building and Component Manufacturing
- Contracting Office
- Department of the Air Force, Direct Reporting Unit - Air Force District of Washington, 11 CONS, 20 MacDill Blvd Suite 400, Bldg P20, Bolling AFB, District of Columbia, 20032, United States
- ZIP Code
- 20032
- Solicitation Number
- FA7012-09-T-0054
- Archive Date
- 8/6/2009
- Point of Contact
- Rhonda Coles, Phone: 202-767-8036, Sheila R. Miller, Phone: 202-767-7957
- E-Mail Address
-
rhonda.coles@afncr.af.mil, sheila.miller@afncr.af.mil
(rhonda.coles@afncr.af.mil, sheila.miller@afncr.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- drawings Drawings 1. Question: Does the parapet style fascia need to be rated at UL Level 8? Answer: Yes, this is a unit safety requirement 2. Question: What are the dimensions for the doors and windows? Answer: Both doors are 36 inches wide and have a clearance of 6 feet 8 inches. The windows are 36 inches wide and 41 inches in height. 3. Question: Could you explain why the unit finish has to be "electrostaticaly" painted and whether an alternative application system is acceptable? Answer: They do not offer an alternative finish. This is a heavy duty finish that is incorporated with the UL Level 8 finish. 4. Question: Are there any drawings of the booth? Answer: Please see the attached drawing 5. Question: Can you please get me the appropriate specifications and drawings for this project? Answer: Please see the attached drawing 6. Question: What is the exterior and interior color specification, is there a particular FED STD 595C color that you are looking to match 2? Answer: No specific color has been picked as of yet 7. Question: The requirement for the parapet on the top of the building is it decorative or is it intended to meet the same ballistics requirement as the rest of the structure is required to meet? Answer: It does not have to meet the same ballistic requirement. The ballistic requirement is for the walls and windows from floor to ceiling. 8. Question: Do you have a door specification for the sliding door on the side of the building, how large? Answer: The door is 36 inches wide and 6 feet 8 inches in height. Not sure what you mean by forced entry protection but it does have to have a commercial mortise lock. 9. Question: Does it require forced entry protection? Answer: Must have a commercial mortise lock 10. Question: Do you have any further or more specific specifications as to the interior layout and the "bench" referred to in the solicitation? Answer: The bench is on the long wall across from the sliding door and is 12 feet long, 18 inches deep and, 18 inches from the floor. The bench also has dividers under the bench to provide 6 cubby holes for gear storage. The sketch also specifies were power outlets and LAN/phone drops are to be. The counter is to be Z shaped mounted on the 11'10" end wall. The counter will have a flip top in the middle section of the Z. The counter will be 24" deep and mounted 34" above the finished floor. 2 parts of the counter will be 4' long and the longer section mounted along the wall will be 7' 10".
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFDW/AFDW11CONS/FA7012-09-T-0054/listing.html)
- Place of Performance
- Address: 11 WG/SFS, 421 BROOKLEY AVE, BOLLING AFB DC 20032, TEL: 202-767-8950 FAX: 202-404-2497, Bolling AFB, District of Columbia, 20032, United States
- Zip Code: 20032
- Zip Code: 20032
- Record
- SN01879735-W 20090719/090718000845-394915e90d052094ac7b4b77d436bc9a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |