MODIFICATION
13 -- FMU-164/B Bomb Fuze
- Notice Date
- 7/9/2009
- Notice Type
- Modification/Amendment
- NAICS
- 332995
— Other Ordnance and Accessories Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, NAVAIR HQ, Building 2272, 47123 Buse Road Unit IPT, Patuxent River, Maryland, 20670, United States
- ZIP Code
- 20670
- Solicitation Number
- N00019-09-R-0215
- Response Due
- 3/31/2010
- Point of Contact
- Christopher T. Kovack, Phone: 301-757-5949, Christine F Marshall, Phone: (301) 757-7052
- E-Mail Address
-
christopher.kovack@navy.mil, christine.marshall@navy.mil
(christopher.kovack@navy.mil, christine.marshall@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- Naval Air Systems Command has approved the released of the DRAFT Serial Data Interface Control Document (SDICD) for solicitation N00019-09-R-0215 (FMU-164/B Bomb Fuze). This document is designated “Distribution D” and will not be posted to this website. Request for the Draft SDICD must be completed according to the instructions below and processed through this office. Upon verification of your status as a current and approved Department of Defense (DoD) contractor and acknowledgement of your responsibilities under U.S. export control laws and regulations, the requested documents will be provided. RELEASE OF TECHNICAL DATA PACKAGE INFORMATION: This program includes information that has been designated “Distribution D” and is only releasable to current and approved Department of Defense (DoD) contractors. Some documents are under Federal export control for “sensitive” or “controlled” technologies regulated by the U.S. Department of State’s International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. As such, the documents contain data whose export/transfer/disclosure is restricted by U.S. law and dissemination to non-U.S. persons whether in the United States or abroad requires an export license or other authorization. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclose of technical data by U.S. persons to foreign persons as defined under the U.S. Department of State website, http://pmdtc.org/licenses.htm. To participate in this program, all firms must acknowledge their responsibility under the Arms Export Control Act. A foreign firm may be required to team with a U.S. firm that possesses a current and valid U.S. facility clearance with technologies/data safeguarding capabilities, inclusive of the authority to receive critical technology and/or data required to execute this program. Any resultant contractor teaming or license agreements between U.S. firms and foreign firms, to include employment of foreign nationals by U.S. firms, shall be in accordance with current U.S. export laws, security requirements, and National Disclosure Policy and shall require the prior approval of the contracting officer and foreign disclosure officer. It is the contractor’s responsibility to provide evidence of any such agreement and/or license to this office for review and this shall be verified prior to release of any controlled documents. Prior to release of any control document, the contractor must acknowledge its responsibilities under U.S. export control laws and regulations (including the obligation, under certain circumstances, to obtain an export license prior to the release of technical data within or outside the United States) and agree that it will not disseminate any export-controlled technical data subject to this requirement in a manner that would violate applicable export control laws and regulations. It is the responsibility of the contractor to provide this certification and/or proof of a current approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. INSTRUCTIONS FOR REQUEST: Interested firms shall submit a written request for the Draft Serial Data Interface Control Document to both LCDR Chris Kovack at christopher.kovack@navy.mil and Ms. Christine Marshall at: christine.marshall@navy.mil. Companies must officially request the controlled documents in writing. To validate the controlled document release, this request must include the potential offeror’s company name, mailing address, email address (if available), point of contact, phone number, current CAGE number, Central Contractor Registration number/DUNS and proof of current security authorization. In addition, the written request must include acknowledgement of the contractor’s responsibility under the U.S. export contract laws and regulations. For any foreign firm, the request must include proof of a current and applicable approval, authorization, or license under E.O. 12470 or the Arms Export Control Act, if applicable. Upon verification of your status and acknowledgement, the requested documents will be provided via the mail on a CD. All requests for the Draft SDICD must be submitted to the abovementioned points of contact by 5:00 pm EST, 24 July 2009. Any questions about this announcement shall be submitted to LCDR Chris Kovack at christopher.kovack@navy.mil or Naval Air Systems Command, Building 2272, Room 256, 47123 Buse Road, Unit IPT, Attn: LCDR Chris Kovack, AIR-2.4.4.3.8, Patuxent River, MD 20670-1547.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N00019/N00019-09-R-0215/listing.html)
- Place of Performance
- Address: Naval Air Systems Command (NAVAIR), NAS Patuxent River, NAS Patuxent River, Maryland, 20653, United States
- Zip Code: 20653
- Zip Code: 20653
- Record
- SN01870376-W 20090711/090710000107-d6337a36dab7e656f30859bebdb271a9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |