SOLICITATION NOTICE
95 -- FABRICATED ERECTOR SET
- Notice Date
- 5/20/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- NASA/Dryden Flight Research Center, Code A, P.O. Box 273, Edwards, CA 93523-0273
- ZIP Code
- 93523-0273
- Solicitation Number
- NND09294576Q
- Response Due
- 6/4/2009
- Archive Date
- 5/20/2010
- Point of Contact
- Brian G. Bowman, Contracting Officer, Phone 661-276-3329, Fax 661-276-2904, Email Brian.G.Bowman@nasa.gov - Christina M Day, Acquisition Support Contractor, Phone 661-276-7065, Fax 661-276-2243, Email christina.m.day@nasa.gov<br />
- E-Mail Address
-
Brian G. Bowman
(Brian.G.Bowman@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/DFRC has a requirement for: Quantity One (1) each Fabricated Erector sethardware, see attached drawing, to include:Item-1 Quantity Four (4) ASTM A-36 Steel 30.0 inches length x 12.0 inches depth Item-2 Quantity Two (2) ASTM A-36 Steel 48.0 inches length x 6.0 inches depthItem-3 Quantity Two (2) ASTM A-36 Steel 60.0 inches length x 6.0 inches depthItem-4 Quantity Two (2) ASTM A-36 Steel 72.0 inches length x 6.0 inches depthItem-5 Quantity Twenty-four (24) ASTM A-36 Steel 48.0 inches length x 10.0 inchesdepthItem-7 Quantity Four (4) ASTM A-36 Steel 120.0 inches length x 9.0 inches depthItem-8 Quantity One (1) ASTM A-36 Steel 144.0 inches length x 9.0 inches depthItem-12 Quantity Two (2) 6061 T6 AL (or equiv) 42.0 inches length x 6.0 inchesdepthItem-13 Quantity Four (4) 6061 T6 AL (or equiv) 48.0 inches length x 9.0 inchesdepthItem-15 Quantity Two (2) 6061 T6 AL (or equiv) 120.0 inches length x 9.0 inchesdepthItem-16 Quantity One (1) 6061 T6 AL (or equiv) 144.0 inches length x 9.0 inchesdepthItem-17 Quantity One (1) 6061 T6 AL (or equiv) 180.0 inches length x 9.0 inchesdepthItem-18 Quantity One (1) 6061 T6 AL (or equiv) 192.0 inches length x 9.0 inchesdepth*Typical Slot cutout every 12 inches*4 Holes every 6.0 inches with center to center spacing of 2.0 inches unless otherwisespecified*Prepare surfaces for outdoor storage*Powder Coat (med Gray)Needed to deliver by 06/15/2009This notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the onlysolicitation, which is issued as a Request for Quotation (RFQ); quotes are beingrequested and a written solicitation will not be issued. Offerors are required to usethe On-Line RFQ system to submit their quote. The On-line RFQ system is linked above orit may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=. Theinformation required by FAR Subpart 12.6 is included in the on-line RFQ.The Government intends to acquire a commercial item using FAR Part 12 and the SimplifiedAcquisition Procedures set forth in FAR Part 13.Questions regarding this acquisition must be submitted in writing (e-mail is preferred)no later than 5/26/2009. Quotes are due by 2:30pm on 6/4/2009. It is the quoter'sresponsibility to monitor this site for the release of amendments (if any). Potentialquoters will be responsible for downloading their own copy of this notice, the on-lineRFQ and amendments (if any).[OMBUDSMAN STATEMENT IS REQUIRED] An ombudsman has been appointed - See NASA SpecificNote "B".Any referenced notes may be viewed at the following URLs link below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/DFRC/OPDC20220/NND09294576Q/listing.html)
- Record
- SN01823108-W 20090522/090521001333-58e3dd395cafa528b718b5dd2d8da30e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |