SOLICITATION NOTICE
65 -- Medical Supplies
- Notice Date
- 4/6/2009
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Department of Homeland Security, Customs and Border Protection, Procurement Directorate - DC, 1331 Pennslyvania, Washington , DC 20229
- ZIP Code
- 20229
- Solicitation Number
- HSBP1009Q2380
- Response Due
- 4/10/2009
- Archive Date
- 10/7/2009
- Point of Contact
- Name: Courtney Knight, Title: Contract Specialist, Phone: 202-344-3943, Fax: 2023443322
- E-Mail Address
-
courtney.knight@dhs.gov;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is HSBP1009Q2380 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-31. The associated North American Industrial Classification System (NAICS) code for this procurement is 334510 with a small business size standard of 500 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-04-10 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Multiple shipping information. The DHS-Customs and Border Protection requires the following items, Exact Match Only, to the following: LI 001, SCOTT 642 Series Multi-Contaminant/P100 Filter Cartridge, Pkg. of 6The SCOTT 642 Series Multi-Contaminant/P100 Filter Cartridge is approved for organic vapors, chlorine dioxide, hydrogen chloride, hydrogen fluoride, hydrogen silfide (escape only), sulfur dioxide, ammonia, methylamine and formaldehyde; 99.97% efficient against solid or liquid particles including oil-base particles.Note: Do not exceed maximum-use concentrations established by regulatory standards., 3, EA; LI 002, DUPONT Tychem TK Coveralls and Level A Suit SIZE XL Coverall with Hood features elastic face hood, elastic wrists and elastic ankles. Sewn and heat-sealed seams. Coverall with Hood and Booties provides an elastic face hood, elastic wrists and sock booties with splash guards. Sewn and heat-sealed seams. Level A Suit includes a front-entry, gas-tight zipper with storm flap, double-taped seams, three-layer composite face shield (40-mil PVC, 5-mil Teflon FEP, 20-mil PVC), SilverShield internal gloves with butyl outer gloves, two exhalation valves, internal adjustable belt and sock boots with splash shields., 2, EA; LI 003, ONGUARD Hazmax EZ-Fit Boots SIZE M Steel toe and steel shank protect your feet. Nonslip EZ-decon outsole provides excellent slip resistance. Boots were designed as an over-the-sock / over-the-suit product--therefore, sizing is reflective of the wearer using a chemical suit in conjunction with the boots., 1, EA; LI 004, ONGUARD Hazmax EZ-Fit Boots SIZE L Steel toe and steel shank protect your feet. Nonslip EZ-decon outsole provides excellent slip resistance. Boots were designed as an over-the-sock / over-the-suit product--therefore, sizing is reflective of the wearer using a chemical suit in conjunction with the boots., 1, EA; LI 005, DUPONT Tychem System CPF Protective Garments SIZE XL Specifications: Coverall with Collar gives you the comfort of an open-collar design. Or choose Hooded Coverall--includes an elastic face hood for additional head-and-neck coverage. Won't interfere with your respiratory protection. Both versions have zipper front with storm fly and elastic wrists and ankles for extra chemical holdout. Coverall with Hood and Booties offers an elastic-face hood and attached booties., 2, EA; LI 006, SCOTT Replacement V-Bar Adaptor Assembly for Full-Face Respirator, 3, EA; LI 007, SUNRISE SunSoft Boot Covers SIZE XL Covers are 18"H with elastic at the top and ankle to hold them in place. White. Dispenser box of 25 pair., 2, EA; LI 008, Kappler Tychem Chem-Tape 2 (yellow)Chemical Resistant Tape for Protective Apparel ApplicationsSpecifications: Use Chem-Tape 2 (which is similar to CPF 4, Responder and Reflector material) for liquid chemical splash protection., 20, EA; LI 009, LAB SAFETY SUPPLY Tyvek Deluxe Coveralls with Elastic Face Hood SIZE XXXXL Offers Less Restriction than Standard Designs Keep more areas of your body covered and protected against harmful particulates. User-friendly design gives you more room with less binding while you're working.Specifications: Hood with elastic gathers covers your head and allows plenty of room for full-face respiratory protection. Coverall with Hood, Elastic Wrists and Booties has attached slip-resistant booties to give you sure footing, 2, EA; LI 010, Kappler Zytron 500 Level A SuitsSIZE XXXXL Top of the Line for Tough ProtectionThe classic responder choice, Zytron 500 is tough and built for mobility. It tackles ultra-demanding Level A and Level B jobs. Superior chemical protection and physical properties make this Zytron 500 Level A Suit second to none. Extra-large view window increases your visibility and helps reduce the effects of a confined space. Suit features expanded back, two exhaust ports, a 48"L gastight PVC zipper, double storm flap with hook-and-loop closure, attached sock boots with boot flaps and field-replaceable butyl gloves. Level A Suit does not have an expiration date that requires the suit to be removed from service., 1, EA; LI 011, SCOTT High Pressure 60-min. Carbon Cylinder for Air-Pak SCBAs The lightweight SCOTT High Pressure 60-min. Carbon Cylinder allows more mobilitySCOTT High Pressure 60-min. Carbon Cylinder is made of a lightweight, composite Cylinder consisting of an aluminum alloy inner shell, with a total overwrap of carbon fiber, fiberglass and an epoxy resin. Built around the DOT specifications and it has a working pressure of 4500 psig.This Cylinder is rated for 60 minutes in duration., 6, EA; LI 012, SCOTT AirPak75 and NxG7 SCBAsSIZE L Reliable Protection Meets Updated NFPA StandardsTime-tested Scott features plus innovations-integrated carrying handles, buddy indicator light, drag rescue loop, angled mechanical gauge with edge lighting, and simplified central power management system with a single battery module-help you comply with new NFPA standards. Both models have a streamlined back frame that provides a lower profile and allows greater freedom of movement with less fatigue and better hose management. The single-piece frame is made from lightweight aluminum alloy. Weight is carried on the hips where padded wrap-around wings provide comfortable support, and distributed over shoulders and hips with wide-bodied pads. Reflective front patches enhance night visibility. Cam-over center slide accommodates 30-, 45- and 60-min. cylinders. An enhanced latching system with durable para-aramid fabric band makes changes quick and efficient. Parachute-style harness fasteners adjust smoothly but keep straps secure. The oversized fasteners are easy to work, even with gloved hands. A one-finger release disengages belt buckle. With two interconnected pressure reducers, any reduction in primary pressure triggers an automatic transfer to the secondary circuit while a vibrating alarm alerts the user, allowing a timely exit the hazardous area. A simplified central battery module holds six standard AA batteries in the housing., 1, EA; LI 013, SCOTT AirPak75 and NxG7 SCBAsSIZE M Reliable Protection Meets Updated NFPA StandardsTime-tested Scott features plus innovations-integrated carrying handles, buddy indicator light, drag rescue loop, angled mechanical gauge with edge lighting, and simplified central power management system with a single battery module-help you comply with new NFPA standards. Both models have a streamlined back frame that provides a lower profile and allows greater freedom of movement with less fatigue and better hose management. The single-piece frame is made from lightweight aluminum alloy. Weight is carried on the hips where padded wrap-around wings provide comfortable support, and distributed over shoulders and hips with wide-bodied pads. Reflective front patches enhance night visibility. Cam-over center slide accommodates 30-, 45- and 60-min. cylinders. An enhanced latching system with durable para-aramid fabric band makes changes quick and efficient. Parachute-style harness fasteners adjust smoothly but keep straps secure. The oversized fasteners are easy to work, even with gloved hands. A one-finger release disengages belt buckle. With two interconnected pressure reducers, any reduction in primary pressure triggers an automatic transfer to the secondary circuit while a vibrating alarm alerts the user, allowing a timely exit the hazardous area. A simplified central battery module holds six standard AA batteries in the housing., 2, EA; LI 014, SCOTT Air-Pak 75 SCBA Backpack, Standard, High Pressure 4500 SCOTT Air-Pak 75 SCBA Backpack Goes Beyond the Standard with Innovative FeaturesThe Air-Pak 75 SCBA Backpack has time-tested Scott features plus innovationsintegrated carrying handles, buddy indicator light, drag rescue loop, angled mechanical gauge with edge lighting, and simplified central power management system with a single battery modulehelp you comply with new NFPA standards.Air-Pak 75 SCBA Backpack has a streamlined back frame that provides a lower profile and allows greater freedom of movement. Weight distribution provides comfortable support. Reflective front patches enhance night visibility. Cam-over center slide accommodates 30-, 45- and 60-min. cylinders. An enhanced latching system allows quick cylinder changes. Parachute-style harness fasteners adjust smoothly but keep straps secure. The oversized fasteners are easy to work, even with gloved hands. A one-finger release disengages belt buckle. The Air-Pak 75 SCBA Backpack provides two interconnected pressure reducers. Any reduction in primary pressure triggers an automatic transfer to the secondary circuit while a vibrating alarm alerts the user, allowing a timely exit from the hazardous area. A simplified central battery module holds six standard AA batteries in the housing. The control console contains a constant-on edge-lit light for the pressure gauge that comes on when the cylinder valve is opened. A photo-sensitive diode automatically dims and brightens the heads-up display as light conditions change. Made in the USA., 3, EA; LI 015, INDUSTRIAL SCIENTIFIC M40 Confined Space Kit for LEL, O2, CO, H2S INDUSTRIAL SCIENTIFIC M40 Confined Space Kit for LEL, O2, CO, H2S has a compact, light rugged ABS case Ultra-bright LED visual alarm, 90dB audible alarm and vibrating alarm sound when dangerous levels of gas are detectedM40 Confined Space Kit for LEL, O2, CO, H2S receives continuous and simultaneous gas concentration readouts of up to four gases on a large, backlit LCD. Monitor features simple operation and calibration peak/hold readings, 50-hour datalogging, high/low, STEL, TWA and low battery alarms. Rechargeable lithium-ion battery lasts up to 18 hours. Dimensions: 4.3"H x 2.45"W x 1.37"D, weighs: 8.6 oz.M40 Confined Space Kit for LEL, O2, CO, H2S include the monitor, motorized sampling pump, compact charger, calibration cup, tubing, belt clip, maintenance tool, instruction manual, combo monitor/pump nylon carrying case, gas cylinder, regulator valve, water barrier assembly and filter., 1, EA; LI 016, Kappler Zytron 300 Coveralls SIZE XXXXL Unique Composite Fabric Has Undergone Stringent TestingAfter being subjected to a wide array of very stringent testing, Zytron 300 fabric proved its effectiveness in environmental extremes. Desert, arctic and jungle conditions were tested, so you know this material will hold up to your hot and cold storage areas as well as high-humidity environments. Developed for the military, this fabric meets chemical and physical performance criteria, even after exposure to extreme environments. Desert tan garments offer broad chemical holdout for superior protection on the job. Encapsulated Level B Suit is a rear-entry style with an expanded back and side air inlet. Features a large PVC face shield for better visibility, one exhaust port, elastic wrists, attached sock boots with boot flaps and a double storm flap with hook-and-loop closure. Single-taped seams., 1, EA; LI 017, Kappler Zytron 400 CoverallsSIZE XXXXL Tough, Thin, Flexible and Economically PricedZytron 400 is one of the toughest Zytron fabrics. You'd expect it to be thick and bulky, but it isn't. In fact, the thickness of the fabric has actually been reduced to increase its flexibility without sacrificing any of its performance. This thinner fabric keeps you more comfortable while you work. Dark green material offers a broad range of chemical protection and excellent physical properties. See below for sizing. Encapsulated Level B Suit is a rear-entry style with an expanded back. A large PVC face shield provides good visibility. Features one exhaust port, elastic wrists, attached sock boots with boot flaps and, 1, EA; For this solicitation, DHS-Customs and Border Protection intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DHS-Customs and Border Protection is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. An award will be made to a responsive offor (who submits all required submissions on time), whose past performance does not pose a risk to the Government, and whose offer is the best overall value to the Government. Award will be to lowest price technically acceptable. US Customs And Border Protection6601 NW 25th StreetMiami, FL 33122
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=cbc223f9c9dbd91cf688477f621fc132&tab=core&_cview=1)
- Place of Performance
- Address: Multiple shipping information.<br />
- Zip Code: Multiple<br />
- Zip Code: Multiple<br />
- Record
- SN01786758-W 20090408/090406220840-cbc223f9c9dbd91cf688477f621fc132 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |