FILE | 34 | Horizontal Boring Machine - Draft Specification

FBO DAILY ISSUE OF FEBRUARY 20, 2009 FBO #2643
DOCUMENT

34 -- Horizontal Boring Machine - Draft Specification

Notice Date: 2/18/2009
Notice Type: Draft Specification
NAICS: 333512 — Machine Tool (Metal Cutting Types) Manufacturing
Contracting Office: Department of the Navy, Naval Air Systems Command, FLEET READINESS CENTER-EAST, PSC BOX 8021, Cherry Point, North Carolina, 28533-0021, United States
ZIP Code: 28533-0021
Solicitation Number: N00421-09-R-0019
Archive Date: 9/30/2009
Point of Contact: Sherry L Kelly,, Phone: (252) 464-7031, Rodney D Ange,, Phone: (252) 464-7032
E-Mail Address: sherry.l.kelly@navy.mil, rodney.ange@navy.mil
Small Business Set-Aside: N/A
Description: DRAFT SPECIFICATION: The draft specification for this requirement is being provided as an attachment to this notice. The complete solicitation, including the final specification, is expected to be released on or around 10 March 2009 and will posted at the Naval Air Systems Command (NAVAIR) home page at: http://www.navair.navy.mil/doing_business/open_solicitations/. Interested vendors are advised that proposals submitted in response to this requirement must be prepared in accordance with the requirements of the final specification and solicitation. SITE VISIT: Offerors are invited to inspect the site at the Fleet Readiness Center (FRC) East where the existing equipment is located. 1. The Site Visit relating to this requirement is scheduled to be conducted on Wednesday, March 4, 2009 at 9:00 a.m. at the FRC East, Marine Corps Air Station (MCAS), Cherry Point, NC. Interested contractors are to assemble in the FRC East main lobby (Building 137) at least 15 minutes prior to the start of the conference/site-visit where a Government representative will be available to escort attendees to the appropriate location(s). 2. Contractor representatives wishing to participate in the site visit must submit a visit request in accordance with FRC East Visit Requests instructions, which are provided as an attachment to this notice. The government point of contact and telephone number for the visit request is Sherry Kelly, 252-464-7031. Although a security clearance is not required for the site visit, all contractor representatives must be U.S. citizens and will be required to furnish a valid driver’s license or other generally acceptable form of picture identification for issuance of a visitors badge allowing for entrance into the facility. Substitution of personnel is not allowed. Photography, including cellular telephones with camera capability, and/or the use of recording devices within the facility is strictly prohibited Additional information regarding access to the Air Station and FRC East is available by phone at (252) 464-7397 or by accessing the FRC East web-site at http://www.nadepcp.navy.mil/FRC_visitors.htm. Failure to submit the proper visit request information will result in denial of access to the facility. Additional site visits will not be scheduled as a result of such failure. 3. Contractor representatives must notify Sherry Kelly via email to sherry.l.kelly@navy.mil of their intent to participate in the site visit concurrent with the submittal of the formal visit request in order to enable the Contracts Office to coordinate access with the FRC East Security Office. 4. The Marine Corps Air Station main gate is located off NC State Highway 101, Havelock, NC. Visitors are required to check-in at the visitor’s center adjacent to the main gate. Once through the Main Gate, contractor representatives should proceed to Building 137 (Main Lobby). Directions from the main gate to Building 137 are available upon request at the visitor’s center. Participants should allow at least one hour for check-in at the main gate and travel to the FRC East location. Participants will depart from Building 137 (Main Lobby) promptly at 9:00 AM EST. Participants arriving late will NOT be included in the Site Visit. 5. Individuals will be required to wear personal protective equipment (PPE) consisting of hearing protection, eye protection, and safety shoes. PPE will not be provided by the facility. Contractor representatives without the appropriate PPE will not be allowed access to the facility and additional site visits will not be scheduled as a result of such failure. 6. The purpose of the site visit is to allow offerors the opportunity to inspect the site where the equipment is to be installed in order to be better able to relate to the Specification requirements. The site visit, in conjunction with the work requirements identified in the final specification, should provide the offeror a detailed understanding of the requirement. 7. The site visit is not intended to be a pre-proposal conference and therefore will NOT be an open forum for questions. Offerors must submit questions concerning, or request clarification of, any aspect of this solicitation electronically via e-mail to sherry.l.kelly@navy.mil. A cut-off date for questions will be provided in the final solicitation. No questions will be accepted after the cutoff date/time specified. Comments and questions must reference Solicitation No. N00421-09-R-0019. Questions will be answered in writing and posted to the NAVAIR open solicitation web-page at http://www.navair.navy.mil/doing_business/open_solicitations/. 8. Failure of a prospective offeror to submit questions regarding this procurement or to attend the Site Visit will be construed to mean that the offeror fully understands all requirements of this solicitation. In no event will failure of the prospective offeror to submit questions or inspect the site constitute grounds for a claim after contract award. 9. At the conclusion of the site visit, unless amended in writing, the terms and condition of this solicitation will remain unchanged. If an amendment is issued, normal procedures relating to the acknowledgement and receipt of any such amendment shall be applicable. ADDITIONAL INFORMATION: Interested parties should continue to monitor both the FBO and NAVAIR web sites for additional information and documents relating to this requirement. For additional information regarding this requirement, contact Sherry Kelly via e-mail at sherry.l.kelly@navy.mil.
Web Link: FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=10faa0ef8a93e735d6cdec8831237de7&tab=core&_cview=1)
Document(s): Draft Specification; File Name: The draft specification for this requirement is being provided as an attachment to this notice. The complete solicitation, including the final specification, is expected to be released on or around 10 March 2009 and will posted at the Naval Air Systems Command (NAVAIR) home page at: http://www.navair.navy.mil/doing_business/open_solicitations/. (N00421-09-R-0019 DRAFT SPECIFICATION.doc); Link: https://www.fbo.gov//utils/view?id=b01beb4b2261865a13732fc2031cb712; Bytes: 98.00 Kb; Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
Place of Performance: Address: Fleet Readiness Center (FRC) East, Cherry Point, North Carolina, 28533, United States; Zip Code: 28533
Record: SN01752391-W 20090220/090218215953-10faa0ef8a93e735d6cdec8831237de7 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

34 -- Horizontal Boring Machine - Draft Specification