SOURCES SOUGHT
93 -- The Contractor shall supply 64 STS Fish Screen Panels per specifications.
- Notice Date
- 2/13/2009
- Notice Type
- Sources Sought
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, U.S. Army Engineer District, Walla Walla, US Army Engineer District, Walla Walla, 201 N. Third Avenue, Walla Walla, WA 99362-1876
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF09Q0045
- Response Due
- 2/23/2009
- Archive Date
- 4/24/2009
- Point of Contact
- Stephen Yoder, 509 527-7205<br />
- Small Business Set-Aside
- Total Small Business
- Description
- SPECIFICATIONS STS MESH POLYESTER PANELS The Contractor shall supply 64 STS Fish Screen Panels per specifications. GENERAL The STS panels shall be of a 5.8 mesh construction woven entirely from 0.039 diameter monofilament. The monofilament, which shall be a chemically enhanced derivative of polyester family of fibers, must be clear in appearance, and not be pigmented white in color, and is to be free from TIO2 (titanium dioxide) the monofilament must be produced with an additive to prevent any occurrences of metal activated degradation. The monofilament also must possess the characteristics of high molecular weight along with generally superior abrasion, hydrolysis and chemical resistance. The STS panels shall be Madison filter part# 7 3360 59 PBT and woven with Syndura type PBT (Poly Butylene Terephthalate) monofilament, # SFNAL, manufactured by Synstrand Inc. of Summerville, SC, or an approved equal. The STS panels shall be sized at 7 feet 10-3/4 inches wd. X 11 feet 2 inches lg. (+or 1/8) The finished STS panels shall have distinct crimp of equal size in both the warp and fill directions and the fabric must be flat, free from pucker or blister. The monofilaments shall be free from abrasion or other damage. The panels shall not have selvage edges. All strands shall run the full length and full width of the panel without splicing. A 12 square sample complete with edging shall be submitted for testing and approval after fabric weaving but prior to delivery. STRENGTH Each monofilament shall have a minimum tensile strength of 80 pounds and minimum elongation at break of 30 percent. The material shall be suitable for use in cold water and shall be heat set at a minimum of 360 degrees Fahrenheit so that it will be dimensionally stable when subject to temperatures of 200 degrees Fahrenheit. It shall also be heat set at an adequate tension to provide dimensional stability at ambient temperatures. SCREEN EDGE PROTECTION The entire edged perimeter of the STS panels shall be protected with polyurethane or another approved equal material. The protective edging shall have a useable temperature range of 10 to + 200 degrees Fahrenheit. The selected edging shall be completely bonded through the mesh to offer equal protection on both sides of the STS panel. The perimeter of the protective edging must not be subject to peeling, flaking, delimitation or separation by any means.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=c078da11cf4b94694e3cc133a11f53b2&tab=core&_cview=1)
- Place of Performance
- Address: US Army Engineer District, Walla Walla 201 N. Third Avenue, Walla Walla WA<br />
- Zip Code: 99362-1876<br />
- Zip Code: 99362-1876<br />
- Record
- SN01750278-W 20090215/090213215410-c078da11cf4b94694e3cc133a11f53b2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |