SOLICITATION NOTICE
95 -- Reproduction of Bronze Castings
- Notice Date
- 1/14/2009
- Notice Type
- Presolicitation
- NAICS
- 331528
— Other Nonferrous Foundries (except Die-Casting)
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, U.S. Army Engineer District, Jacksonville, US Army Engineer District, Jacksonville, P.O. Box 4970, Jacksonville, FL 32232-0019
- ZIP Code
- 32232-0019
- Solicitation Number
- W912EP-09-R-0012
- Response Due
- 2/19/2009
- Archive Date
- 4/20/2009
- Point of Contact
- Edgardo Carrasquillo, 904-232-1792<br />
- Small Business Set-Aside
- Total Small Business
- Description
- SYNOPSIS W912EP-09-R-0012 Reproduction of Bronze Castings for S-77 Moore Haven Lock, Florida US Army Corps of Engineers, Jacksonville District, intends to procure services to provide all labor, equipment, physical facilities, materials, supervision and any other resources necessary to produce castings of bronze bushings and liners for the S-77 Moore Haven Lock upper gates 1 and 3. The Contractor shall use existing casting molds (molds) to cast the bronze parts, except as provide in paragraph 1.5.3. The Contractor shall arrange for pick up of the molds from government facilities, for delivery to the foundry; and for their return along with the castings back to the government warehouse. Description and Identification of Molds. Only molds for the LINER and PN3 are available. They are made out of wood, and packed in crates. Although all efforts have been made to locate and properly identify molds for the lower hinge (LH-1) bushings and upper hinge bushings (UH-1), those could not be found. It is considered, however, that due to simplicity of parts LH-1 and UH-1, a new mold could be used to cast both parts. New Mold(s). If the mold for any part is not available, or if it is damaged beyond repairs, the Contractor must fabricate a new mold based on provided drawings. The mold shall be oversized to allow for waste material according to customary practice within the foundry industry. Material for the mold shall be durable, and easy to storage and transport. The Contractor must provide, in writing, a cost estimate, which shall include time required to produce the mold(s). Castings. The Contractor shall produce two castings each of the lower bushing LH-1, the upper bushing UH-1, LINER, PN3 and PN4 based on attached sketches. Prior to fabrication of the molds, the Contractor shall obtain approval from the COR. Repairs must be performed by the Contractor as soon as possible after receiving the notice to proceed. Material. Material for the aluminum bronze castings shall conform to ASTM B148 Copper Alloy UNS No. C95400. Material for the chromium steel shall conform to ASTM A743. Site visit for interested parties will be scheduled on or about 29 January 2009 to inspect molds. Award will be for a Firm Fix-Price contract with performance upon contract award. RFP W912EP-09-R-0012 will be issued on or about 22 January 2009 with proposals due on or about 19 February 2009. RFP will be issued in electronic format only. Interested offerors must register electronically. The registration forms are located at the Army Single Face to Industry, ASFI@conus.army.mil / select (Contracting Opportunities Search). This acquisition is being solicited as a 100% Small Business Set-Aside, therefore only small businesses are invited to respond. The SIC code is 3366, the NAICS code is 331528, and the size standard is 500 employees. DFARS 252.204-7004 Required Central Contractor Registration (CCR) applies to this procurement. You must be registered in the Central Contractor Registration in order to be eligible to receive an award from this solicitation. Information on CCR registration and annual confirmation requirements may be obtained by calling 1-888-227-2423 or via the Internet at http://www.ccr.gov. Prospective contractors must be registered in the Department of Defense CCR database prior to award. Lack of registration in the CCR database will make an offeror ineligible for award. Point of Contacts: Edgardo Carrasquillo, Contract Specialist, US Army Corps of Engineers, Jacksonville District, CESAJ-CT-S, 701 San Marco Blvd, Jacksonville, FL 32207-8175. Telephone number: 904-232-1792, Fax numbers 904-232-2748/2749. Via email: edgardo.carrasquillo@usace.army.mil; Charles Connelly, Contracting Officer, Telephone number 904-232-1198. Via email: charles.c.connelly@usace.army.mil
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=6746994a7cdebec02cb510b5c2a86785&tab=core&_cview=1)
- Place of Performance
- Address: US Army Corps of Engineer Clewiston Office Warehosue 525 Ridgelawn Road Clewiston FL<br />
- Zip Code: 34440-5399<br />
- Zip Code: 34440-5399<br />
- Record
- SN01732178-W 20090116/090114215521-6746994a7cdebec02cb510b5c2a86785 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |