SOLICITATION NOTICE
20 -- REPOWER THE M/V MUDDY WATER ALUMINUM HULL CREWBOAT
- Notice Date
- 12/17/2008
- Notice Type
- Presolicitation
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, U.S. Army Corps of Engineers, Vicksburg District, US Army Corps of Engineers, Vicksburg District, ATTN: CEMVK-CT, 4155 Clay Street, Vicksburg, MS 39183-3435
- ZIP Code
- 39183-3435
- Solicitation Number
- W912EE-09-T-0004
- Response Due
- 1/15/2009
- Archive Date
- 3/16/2009
- Point of Contact
- Demetric Erwin, 601-631-5951<br />
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. Solicitation Number W912EE-09-T-0004 is being issued as a request for quotation (RFQ) with the intent to award as a simplified acquisition. The solicitation document and incorporated provision and clauses are those in effect through Federal Acquisition Circular 2005-28. THIS PROCUREMENT IS 100% SMALL BUSINESS SET-ASIDE AND ISSUED UNDER NAICS CODE 811310(SIC 7699) WITH A SIZE STANDARD OF $7.0 MILLION FOR A FIRM FIXED PRICE CONTRACT. This procurement may be quoted as follows: Line Item 0001 Supplies/Services: Repower of the Motor Vessel Muddy Water. Quantity: 1 Unit: Lump Sum, Unit Price $ ___________; Total amount for Line Item 0001 $____________. The U. S. Army Corps of Engineers, Vicksburg District has a requirement to repower the M/V MUDDY WATER aluminum hull crewboat to include engine, reduction gear, shafts, propellers, throttle controls, electronic engine gauge panel and all installation, setup and start up. The existing twin screw vessel has CAT 3208 engines with Twin Disc gears installed. Dimensions and particulars of the vessel are: Length 36' 6 inch; Breadth 12' 7 inch; Draft 2' 6 inch; Weight 12.5 tons; Twin Screw. The work to be performed consists of furnishing all materials, equipment, supplies, labor and performing all work as required for installation of two (2) new propulsion systems to manufacturers recommendations and specifications. All work shall be in place in the vessel which will be located at 2577 Haining Road, Vicksburg, MS 39183. All work shall be completed within 6 months of the award of the contract and notice to proceed. Main engines shall be Caterpillar C7 ACERT, E rating or equal with a minimum of 454 bhp at 2800 rpm, turbocharged and aftercooled, in-line, 6 cylinder, 4 stroke. Engines shall come complete with electronic throttle controls, electronic engine gauge panel, wiring harness and all other components for proper installation and operation. Also the engine must be electronically fuel injected with electronic governor. One engine shall be for left hand service and the other for right hand service. Due to space constraints in the vessel the following dimensions cannot be exceeded in addition to the other requirements noted. Length overall: 56.75 inch; Width overall: 36.75 inch ; Height overall: 36.25 inch; Minimum Torque at full load: 852 ft-lbs; Maximum Fuel Rate at full load: 25 Gal/hour; Maximum weight (dry): 1760 lbs; Must meet EPA MAR-T2R 2006 Emissions requirements; The weight to HP (weight/HP) ratio shall not exceed 3.88. Engines shall be manufactured by an American owned company. Reductions gears shall be Twin Disc manufactured or equal and be suitable for operation with the main engines. Gear ratio shall be determined by the contractor for optimum performance. The present shafting in the vessel is stainless steel, 2 diameter with a stuffing box and strut bearing for that diameter. Should the repower require a larger shaft it will be the contractors responsibility to determine the new shaft diameter and provide and install suitable sterntube, stuffing box and strut bearings to accommodate the new diameter. Propellers shall be stainless steel, 4 blade with a tapered and keyed bore and threaded aft of the taper to accommodate the wheel keeper nut. Blade diameter and pitch shall be determined by the contractor to optimize performance. Warranty on all equipment shall be for a minimum of 12 months from the date the vessel is put back into service. FAR Provision 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. Offerors must include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items with this offer. The Clause 52.212-4, Contract Terms and Conditions, applies to this acquisition. The following FAR clause in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items, will apply: 52.219-6, Notice of Total Small Business Set-Aside (JUNE 2003); 52.219-8, Utilization of Small Business Concerns (MAY 2004); 52.219-14, Limitations on Subcontracting (DEC 1996); 52.219-28, Post Award Small Business Program Rerepresentation (JUNE 2007); 52.222-3, Convict Labor (JUNE 2003); 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2008); 52.222-21, Prohibition of Segregated Facilities (FEB 1999); 52.222-26, Equal Opportunity (MAR 2007); 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of Vietnam Era, and Other Eligible Veterans (SEP 2006); 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998); 52.222-37, Employment Reports on Special Disabled Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006); 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (DEC 2004); 52.222-50, Combating Trafficking in Persons (AUG 2007); 52.225-1, Buy American Act--Supplies (JUNE 2003); and 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003). The full text of a FAR clause may be assessed electronically at http://www.acqnet.gov/far. If you are not registered in the CCR, an award CANNOT be made to your company. You may register electronically at http://www.ccr.gov. Registering electronically will expedite the registration process acquisition. Quotes are due 15 Jan 2009 not later than 4:30 p.m. (CST) at the Vicksburg Contracting Office, ATTN: Demetric T. Erwin, 4155 Clay Street, Vicksburg, Mississippi 39183-3435, at (601)631-5951 or e-mail at Demetric.Erwin@usace.army.mil. Offerors should check the FedBizOpps Web Page often for new solicitations and/or changes (AMENDMENTS) to existing ones. All technical inquiries and questions relating to W912EE-09-T-0004 are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continue. From this page you may view all bidder inquiries or add inquiry. Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. The Solicitation Number is: W912EE-09-T-0004 The Bidder Inquiry Key is: 86ZXP2-FYA71R Bidders are encouraged to submit questions at least 5 days prior to the closing/response date of the solicitation in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Bidders/Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. For Help with the ProjNet System; the call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=a07f3a989ec77322b68a171edf8550ef&tab=core&_cview=1)
- Place of Performance
- Address: US Army Corps of Engineers, Vicksburg District ATTN: CEMVK-CT, 4155 Clay Street Vicksburg MS<br />
- Zip Code: 39183-3435<br />
- Zip Code: 39183-3435<br />
- Record
- SN01720623-W 20081219/081217220438-a07f3a989ec77322b68a171edf8550ef (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |