SOURCES SOUGHT
C -- Engineering, Technical, and Manufacturing Services
- Notice Date
- 12/9/2008
- Notice Type
- Sources Sought
- Contracting Office
- Department of the Army, U. S. Army Materiel Command, US Army, Army Contracting Command, Joint Munitions and Lethality (JM&L) Contracting Center, US Army, Army Contracting Command, Joint Munitions and Lethality (JM&L) Contracting Center, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-09-X-0287
- Response Due
- 12/24/2008
- Archive Date
- 1/23/2009
- Point of Contact
- Jeremy Phillips, Contract Specialist, (973)724-3050<br />
- Small Business Set-Aside
- N/A
- Description
- The US Army JM&L Contracting Center is conducting a Market Survey for effortsassociated with providing engineering, technical, and manufacturing services in support of The ARDEC Materials, Manufacturing and Prototype Technology Center. The contractor shall provide engineering services, technical assistance, and manufacturing services in support of the Munitions Engineering Technology Center and the Weapons and Software Engineering Center. Systems include, but are not limited to, the following: precision guided mortar munitions (PGMM), electromagnetic (EM) guns, 60mm mortar systems, 81mm mortar systems, 120mm mortar systems, extended range artillery (ERA), 105mm artillery systems, 155mm artillery systems and grenade systems. Period of performance is anticipated for 5 years. The contractor shall provide engineering services, technical assistance, and manufacturing services in support of Product Management offices. Such offices include but are not limited to: PM-TV, PM-LAV, PM-Stryker, PM-HBCT, PM-AMS, PM-Stryker, and PM-Crew Served Weapons. 1.Manufacturing Engineering support oTechnical reviews oIndependent design reviews oTechnical evaluations oAdvanced Composite Materials oExperimental Manufacturing Processes oLow Rate Initial Production oValue engineering change proposals (VECP) and engineering change proposals (ECPs) oFabrication and testing of prototype hardware oStructural analysis oThermal analysis oEngineering models and drawings2.Manufacturing Engineering oProduct Design for Manufacturing oProcess mapping oMaterial selection oTool/Die design oMaterial compatibility oProduction life cycle cost estimating oDevelopment of specialized production and test equipment oProducibility analysis oManufacturing Process Development oManufacturing Process Reliability analysis oFixture and Gauge Design3.Manufacturing Services (including but not limited to) oMachining oCasting oForging oWelding oPackaging oHeat Treating oPainting oPlating oRapid Prototyping (to include Laser Sintering and Stereo lithography) oFastener fabrication oLaser cutting oWaterjet cutting oPlasma cutting oElectro-Discharge Machining oElectro-Chemical Machining oStamping oBending oExtruding oGrinding oMolding plastics and composites oAssembly4.Testing support oDestructive testing oNon-Destructive testing oBallistic Testing5.Manufacturing Knowledge Management6.Development and Maintenance of Agile Manufacturing Network7.Lean Manufacturing and Value Stream Mapping8.Modeling and Simulation9.Project management10.Quality Control oInspection Process Development oPhysical Inspection oSix-Sigma techniques11.Cost analysis and cost estimating12.Manuals, Reports & Specifications Interested firms, who feel they are capable, are invited to indicate their interest by providing to the U.S. Army a brief summary of their companys capabilities including a brief description of training units and verification of existing prototype/commercially available units. These technical capabilities shall be submitted ELECTRONICALLY ONLY, and within fifteen (15) days from the date of this notice to jeremy.phillips6@us.army.mil. Information provided should be limited to 15 pages. Please also provide the companys name, address, and point of contact with telephone number and email address, size of business (small/large) and team members. This is a market survey for information only. It does not constitute a RFP and is not to be construed as a commitment by the Government. The submission of this information is for planning purposes only and should be submitted at no cost or obligation to the Government.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=e64bd5af936e828c45fdf7ef37fcae40&tab=core&_cview=1)
- Record
- SN01716007-W 20081211/081209220013-e64bd5af936e828c45fdf7ef37fcae40 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |