SOURCES SOUGHT
36 -- Wire Marking Machine
- Notice Date
- 9/4/2008
- Notice Type
- Sources Sought
- NAICS
- 339943
— Marking Device Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 96th Contracting Squadron (Eglin AFB), 96th Contracting Squadron, 205 West D Ave., Suite 541, Eglin AFB, Florida, 32542-6862
- ZIP Code
- 32542-6862
- Solicitation Number
- F1T0DD8204AG01
- Archive Date
- 9/24/2008
- Point of Contact
- Mary G. Gardner,, Phone: 850-882-0338, Manivanh S. Mundy,, Phone: 850-882-0335
- E-Mail Address
-
mary.gardner@eglin.af.mil, manivanh.mundy@eglin.af.mil
- Small Business Set-Aside
- N/A
- Description
- SOURCES are SOUGHT for one turnkey non-aggressive wire marking and processing system to ensure cable and wire are in compliance with SAE A550881, MIL-M27735, and MIL-STD-7080, Para 5.13. SPECIFICATIONS: The system shall have all the following specifications: Non-motorized de-reeler with knot detection capability to remove wire from its shipping or storage reel; Encoding capability to allow for bare wire detection, wire speed, and wire length; UV (Ultraviolet) laser print head with minimum character size of.030 inch and a maximum charter size of.125 inch; Integrated, powered wire pulling and cutting system; Powered wire coiling system for printed wire; Unit must be able to process (de-reel, print, cut, and coil) at least 10 feet of wire per minute; Process wire sizes from.35 inch to.250 inch in diameter; Length of wire that can be processed must be a minimum of 12" with maximum length of 125 feet; Unit must have a built in or attached controller, microprocessor, PC, keyboard, and screen; PC must have installed software to run vendor's system; Foot print of entire system must fit on a standard 3ft by 6ft. table or in the space occupied by same table. Electrical power requirement must not exceed 120/208 volt A/C, 3 phase, at 30 amps. Compressed air requirements shall not exceed 120 PSI at 20CFM. INSTALLATION, SETUP, OPERATION CHECKS, AND TRAINING: Vendor shall install, set up, and do operation checks to system before acceptance. In addition, vendor shall train up to 8 shop personnel on site and provide operation, maintenance, and troubleshooting manuals. WARRANTY: Entire system is to be warranted for at least one year from date of acceptance. TRADE-IN: If vendor takes trade-in of existing Tri-Star Technologies M100J Ink-jet Wire marker, vendor will be responsible for shipping of trade-in unit. Responses to this notice must be received within 5 days from date of notice publication. This notice is for information and planning purposes only; it does not constitute an IFB or RFP, and is not to be construed as a commitment by the Government. Firms responding to this notice should state whether they are, or are not, a small business concern, a service-disabled veteran owned small business, or a HUBZone business concern as defined in FAR 52.219-1 for NAICS Code 339943, small business size standard 500 employees. The Air Force reserves the right to consider a small business set-aside based on responses hereto. This requirement may be pursued sole source if the Air Force determines that only one source is capable of satisfying the requirement. The Government will neither award a contract solely on the basis of this Sources Sought Notice, nor will it reimburse the contractor for any costs associated with preparing or submitting a response to this notice. Any interested parties shall ensure that they are registered in Central Contractor Registration (CCR). To register in CCR, go to http://www.ccr.gov or call 1-888-227-2423 for assistance. Direct any questions about this requirement, by email only, to mary.gardner@eglin.af.mil or to manivanh.mundy@eglin.af.mil. To respond to this notice, contact Ms. Mary Gardner or Ms. Manivanh Mundy, Contract Specialists, 96 CONS/MSCBB, email mary.gardner@eglin.af.mil or timothy.estrada@eglin.af.mil.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=c5899da079c7bd66feff6c4bd3ca4bf1&tab=core&_cview=1)
- Place of Performance
- Address: Eglin Air Force Base, Florida, 32542, United States
- Zip Code: 32542
- Zip Code: 32542
- Record
- SN01659768-W 20080906/080904221811-c5899da079c7bd66feff6c4bd3ca4bf1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |