Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 18, 2008 FBO #2457
SOLICITATION NOTICE

41 -- Replacement of Air Handling Unit Dampers at the SSA Facility in Queens, NY

Notice Date
8/16/2008
 
Notice Type
Presolicitation
 
NAICS
238220 — Plumbing, Heating, and Air-Conditioning Contractors
 
Contracting Office
Social Security Administration, Office of Budget, Finance, and Management, SSA Region 2, 26 Federal Plaza, Room 4010, New York, New York, 10278
 
ZIP Code
10278
 
Solicitation Number
SSA-RFQ-02-08-1002
 
Point of Contact
Andrew Argiro, Phone: 212-264-2766
 
E-Mail Address
andrew.argiro@ssa.gov
 
Small Business Set-Aside
Total Small Business
 
Description
The Social Security Administration, Region II, seeks a contractor to replace damaged Air Handling Unit system dampers (fresh air supply, minimum, return and spill) at the following facility: Joseph P. Addabbo Federal Building (Northeast Program Service Center), 155-10 Jamaica Ave., Jamaica, NY 11432. In each location identified by SSA, the contractor shall remove existing dampers on Air Handling Units. Included are spill air dampers, return fan dampers, minimum fresh air dampers, fresh air dampers and insuring that the manufacture and installation of the dampers meet or exceed the standards set forth by SMACNA (Sheet Metal and Air Conditioning Contractors’ National Association). Replacement dampers shall be manufactured of anodized aluminum. Replacement dampers shall be of opposed blade design (rather than parallel). Linkages must be manufactured of a non-corrosive material. Linkages must be concealed within the frame. Linkages must be made of five-eighth inch x one eighth inch aluminum bar. Frames must be made of extruded aluminum, minimum thickness of.050”. Blades must be manufactured of extruded aluminum, minimum thickness of.050 inches. Blade seals on fresh air and minimum air dampers must be made with compression jamb seals of stainless steel. Control shaft is to be factory installed, one-half inch x six inches with outboard support bearings. Each section of the damper is to be supplied with a bronze iolite bearing. The Request for Quotation containing the full Statement of Work and all provisions is expected to be issued on approximately August 18, 2008 and may be downloaded at http://www.fedbizopps.gov. Prospective quoters will be afforded a site visit, the date for which will be contained in the solicitation. This is a total small business set aside, conducted under FAR Part 12, Acquisition of Commercial Items. The NAICS code is 238220 with a size standard of $13 million.
 
Web Link
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=59aa00823bc10bef9bc3edc048605b67&tab=core&_cview=1)
 
Place of Performance
Address: 155-10 Jamaica Avenue, Jamaica, New York, 11432, United States
Zip Code: 11432
 
Record
SN01642564-W 20080818/080816214850-59aa00823bc10bef9bc3edc048605b67 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.