SOLICITATION NOTICE
51 -- Computer Tools
- Notice Date
- 8/8/2008
- Notice Type
- Presolicitation
- Contracting Office
- Department of the Army, Army Contracting Agency, North Region, ACA, Fort Carson, Speicher ave, FT Carson , CO 80913
- ZIP Code
- 80913
- Solicitation Number
- W911RZ-08-T-0239
- Response Due
- 8/14/2008
- Archive Date
- 2/10/2009
- Point of Contact
- Name: George Nasif, Title: Contracting Specialist, Phone: 7195263649, Fax: 7195265333
- E-Mail Address
-
george.nasif@conus.army.mil;
- Small Business Set-Aside
- Service-Disabled Veteran-Owned
- Description
- Bids are being solicited under solicitation number W911RZ-08-T-0239. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein. If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 79700. GSA Schedule Bids Preferred, But Not Required: Sellers may either provide a GSA Schedule or an Open Market bid. If bidding with a GSA Schedule, the requested items must be on that Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified sellers may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-08-14 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FT Carson, CO 80913 The USA ACA Fort Carson requires the following items, Meet or Exceed, to the following: LI 001, 1.Heavy duty multi function stripper: Specifications: Insulated terminals 22-10AWGNon-insulated terminals 22-10AWGAuto ignition terminalsBuilt in cutterAdjustable stopperMicro adjustmentStrips AWG 24-10, 5, EA; LI 002, 2.Computer networking installation tool kit Includes: Die setsRG-58, 59, 62.5RG-58, 59, 62.5, 174 Fiber OpticRG-174, 179, Belden 8218, Fiber OpticRG-8, 11, 174, 179, 2136.5 cable cutterCable stripper with cutter6.5 cable cutterCable stripper with cutterCoaxial cable stripperPunch down tool with 66/88/110 bladesCoaxial stripper2 screw drivers251452 Enhance Network cable testerHard plastic case with inner foam padding (375x253x38mm)Features: This kit provides the necessary tools for termination and testing of all the different types of network cables., 2, EA; LI 003, 3.Computer maintenance tool kit: Includes: (1) 5" cutters (1) 5" Needle-nosed pliers (1) 5" Micro cutters (1) 6" Adjustable wrench (1) Wire stripper/cutter (1)Quick heat ceramic solder iron (1) Desoldering braid (1) PLCC Extractor (1) Anti static IC Extractor (1) Precision tweezer (1) Spring hook (1)Blowing Brush (1) Inspection Mirror (1) 7 Piece folding hex key set (1) Field service ESD kit (matt and straps) (1) Mini Flashlight (1) Ratcheted screwdriver handle with 6pc nutdriver blades-3/32" to 1/4" and 12pc scredriver blades-Phillips #0,#1,#2,Flat Blade 1/8",3/16",1/4"-Star Tip T6, T7, T8, T9, T10 and T15 (2) piece removable tool pallets (1) Zippered carry case, 2, EA; LI 004, 4.Communications maintenance tool kitIncludes:(1) 6" adjustable wrench (150mm) (1) Amplifier probe and tone generator (1) D-SUB insertion/extraction tool (1) 8Pc screwdriver blades (1) Extension Blade (175mm) (1) Precision wire stripper (1) 3PC anti static alignment tool (1) 4" micro cutting plier (1) 7 pc Folding type Hex wrench (1) 5" Electrician's Scissor (1) 7pc Nut Driver Blades (1) 5" Straight forceps (1) 6" Long Nose Plier (1) 6" Stainless steel rule (1) Inspection Mirror (1) 5" Long Nose Plier (1) 8" Groove Joint Plier (1) Spring Hook (1) Probe-pic spudger (1) Reverse action tweezer (1) 3M/10ft measuring ruler (1) Electrician's Knife (1) Dual Telephone line tester (1) Butt set (1) Pocket clip (1) Mini flash light (1) Anti Static strap (1) 2pc Removable pallet (1) Deluxe carry tool bag, 2, EA; LI 005, 5.Deluxe telecom installation kitIncludes:o(1) All purpose snip o(1) Double end socket can wrench o(1) 8 Piece folding hex key set o(1) Electronics knife o(1) 6 Long nose plier o(1) Dual color diagonal cutter o(1) Micro cutting plier o(1) 6 Adjustable Wrench (1) Probe-Pic spudger o(1) Electrician scissors o(1) Pro-soft Flat Blade screwdriver (6.0 x 100mm) o(1) Pro-soft Phillips screwdriver (32 x 100mm) o(1) Pro-soft Flat Blade screwdriver (5.0 x 100mm) o(1) Pro-soft Phillips screwdriver (#1 x100mm) o(1) Double ended screwdriver o(1) Precision hand drill o(1) 23 Piece driver socket set o(1) All in one Toner & Probe kit o(1) In-line modular adapters 4/6/8 pin 3 in 1 o(1) Punch down tool with 66/110 blades o(1) HD curved claw hammer w/ fiberglass handle o(1) 50 foot fish tape o(1) Assorted 5 (15 pieces) Velcro cable ties o(1) 10 piece Electronic combination wrench (inch & metric) o(1) Utility compartment storage box o(1) Die set for 8P8C/RJ45 plug & cable o(1) Die set for RG58, 59,62,174 o(1) Die set for CATV F connectors RG 59, 6 o(1) Hi-rel Tape Measure 3M/10Ft o(1) 6 Straight Forceps o(1) Top & Bottom Tool Pallets for tool case o(1) Aluminum frame tool case, 2, EA; LI 006, 6.Wheeled electronics tool kitIncludes:o(1)Wheeled tool case w/ telescoping handle oTool case made from heavy duty ABS o(1) Tool Pallet o(1)22 piece 1/4" drive socket Set(1)Long nose plier 5 5/16" o(1)Diaganol Cutter 4 5/16" o(1)Linesman Plier 6 1/2" o(1)Side Cutting Plier 6 1/2" o(1)9 piece ball joint arm hex key set o(1)5 piece needle file set o(1)30 Watt Solder Iron o(1)Desoldering Wick o(1)Solder Core 63%, SN o(1)PVC Insulated Tape o(1)Utility Knife-3 blades self loading o(1)10 foot measuring tape o(1)Electricians Scissors o(1)Flux Bottle o(1)Blow Brush o(1)Telescopic magnetic pick up tool o(1)Inspection Mirror o(1)Digital Multimeter o(1)HD Hammer w/ fiberglass handle o(1)IC Extractor o(1)Slip Channel pump pliers-10" o(1)Utility component storage box o(1)6 piece electronic screwdriver set o(1)Slip joint plier 6 1/16" o(1)Set cushion grip screwdriv er 3.2 x 2, #0 x 2, 5.0 x 2, #1 x 2, 6.0 x 3, #2 x 3, #2 x 9, #1 x 3, 6.0 x 1 o(1) Super fine straight tip, 2, EA; LI 007, 7.Handheld OscilloscopeSpecifications:input impedance: 1 Mohm / 20pF bandwidth: 2 x 30MHz sampling: 240MS/s per channel step markers for voltage, time,... vertical resolution: 8 bit sensitivity: min. 30V volts per division: 1mV to 20V/div time base: from 25ns to 1 hr/div AC/DC input coupling selection RS232 communication with PC (PCUSB6 for USB connection in option) dimensions: 9.1" x 5.9" x 2.0" weight: 30oz. incl. battery Features: 2 input channels high contrast LCD with white backlight full auto set-up for volt/div and time/div recorder roll mode, up to 170h per screen trigger mode: run - normal - once - roll... adjustable trigger level and slope peak measurements: max, min. and pk to pk measurements: rms, dB(rel), dBV, dBm and dBG Direct Audio power measurements x1 and x10 probe calculation option several display modes StereoScope mode for audio measurement X and Y position shift battery pack included, fast charge possible, 3, EA; For this solicitation, USA ACA Fort Carson intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Fort Carson is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. Contact ClientServices@FedBid.com or call 1-877-9FEDBID to address any questions or comments New equipment ONLY, NO remanufactured products Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified Agencies may require registration with the Central Contractor Registry (CCR) or to receipt of order. Information can be found at www.ccr.gov Bid must include shipping to FT Carson CO 80913 Quoted item must be in compliance with the Buy Amerivan Act --- See attachment Successful bidder must certify this prior to award. All quotes will be evaluated on price, technical acceptability, and delivery
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=4c40d72534602000550c45c96f3fda98&tab=core&_cview=1)
- Place of Performance
- Address: FT Carson , CO 80913<br />
- Zip Code: 80913<br />
- Zip Code: 80913<br />
- Record
- SN01635501-W 20080810/080808223253-4c40d72534602000550c45c96f3fda98 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |