SOLICITATION NOTICE
71 -- Furniture
- Notice Date
- 5/7/2008
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337214
— Office Furniture (except Wood) Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department, Hwy. 547 Attn:B562-3C, Lakehurst, New Jersey, 08733-5083
- ZIP Code
- 08733-5083
- Solicitation Number
- N68335-08-T-0064
- Response Due
- 5/23/2008 4:00:00 PM
- Point of Contact
- Jillian J Kohler,, Phone: 732-323-4589
- E-Mail Address
-
jillian.kohler@navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION for Commercial Items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) This solicitation number N68335-08-T-0064 is issued as a competitive request for Quotation (RFQ). (iii)This solicitation will be 100% small business set aside in accordance with FAR 52.219-6. The NAICS is 337214. (iv)Contract Line Item Numbers (CLINS) are for the following listed items: Overall Requirements: -All products provided to meet the listed requirements must also be fully assembled and/or installed by the vendor. -Installation must be coordinated with NAVAIR public works department, and therefore may require the incremental delivery of certain parts. -Installation will be on top of a 4 raised computer access flooring -Unless otherwise stated, all worksurfaces provided must ESD protective. Electronic components will be openly handled, and static must be dissipated and neutralized for their protection. Workstations: -U-Shaped Work Area -Laboratory-grade cabinetry and casework -Epoxy-Resin work surface -30 deep workstations -U-shape dimensions: 240 back with two 151 sides. -104 of each side shall be 36 high worksurfaces. All other areas will be sitting height, 30 high surface, including corner units. -Overhead wall-mounted 36 high cabinets, 18 above all worksurfaces. -Worksurfaces to have a rounded bullnose front. -120V Xenon lights mounted under all cabinet units -Backsplashes and 125V power strips along all worksurfaces -Two sound dampening floor cabinets with dental-grade quiet air compressor installed. Compressor systems must include quick-disconnect tubing with attachments for both a compressed air nozzle and a compressor-powered bag vacuum system. -A 24 wardrobe unit must accompany one leg of the U-shape. -Sink Area -102 long, 36 high, 30 deep worksurface -24 of floor cabinet must be sound dampening to house pumps for a circuit card fabrication system. There will be no overhead wall-mounted cabinetry above this unit. -78 of wall-mounted cabinetry above worksurface -120V Xenon lights mounted under all cabinet units -Chemical resistant resin surface -Worksurfaces to have a rounded bullnose front. -19x25x12 stainless steel drop-in sink with rotating gooseneck faucet and laboratory hookup spout -Plumbing of sink and faucet to existing hot, cold, and drain lines. -Refrigerator/Freezer combo installed in a 24 wide open space under the 36 high worksurfaces. Must be appropriate for storage of chemicals. -All floor cabinets must be 22 deep, with 13 of pipe space left between the rear of the cabinet, and the adjacent wall. Mobile Workstations: -All workstations must include custom 1-3/4 thick maple wood tops -Metal base capable of holding a 1200 pound load. -Items #1&2 -Two 31x76 mobile worksurfaces. -36 standard height, with options for height adjustment. -Dogbone-style latching feature to perform a flush and level joining of both worksurfaces along the 76 edge -Carrymaster AC-600 leveling castor shall be installed on all four legs of each workstation. -One under-surface drawer, 4 high and 21 long, on each workstation -Item #3 -31x76 mobile worksurface. -36 standard height, with options for height adjustment. -Carrymaster AC-600 leveling castor shall be installed on all four legs of workstation. -Three under-surface drawers, 4 high and 21 long -Radiused corners on maple top -Item #4 -31x76 mobile worksurface. -36 standard height, with options for height adjustment. -Carrymaster AC-600 leveling castor shall be installed on all four legs of workstation. -Three under-surface drawers, 4 high and 21 long -Square corners on maple top -Item #5 -47 wide by 29 deep stainless steel cart. 36 height. -1Ύ maple wood top -Ό steel lip above maple top along edges -Must have locking castors Wall-hung Countertop: -98 wide by 36 deep corian countertop -Mounted on wall at 30 height. -Must coordinate with NAVAIR Public Works dept. to install on custom brackets to enable a 600 pound load along the outer edge of said countertop. Brackets will be provided by NAVAIR. -Does not require an ESD surface -Must have cutouts for cable pass-through along rear of countertop. Shelving: -Three sets of wall-mounted 1Ύ maple wood shelving -Maple wood shall be provided in 48 wide by 24 deep sections -Each section to sustain a 600 pound weight -Must have cutouts for cable pass-through along rear shelf. -Each row of shelving to have a metal endcap -Shelved must be mounted with an under-shelf bracket. All installation performed by the vendor. NAVAIR public works is available to add additional studs to wall upon request. -Item #1 -Three rows, each separated vertically by 36 of open space -Each row to consist of 3 sections of 48 wide maple, side-by-side -First row to begin 12 vertically from surface of floor -Items #2 (identical to previous item) -Three rows, each separated vertically by 36 of open space -Each row to consist of 3 sections of 48 wide maple, side-by-side -First row to begin 12 vertically from surface of floor -Item #3 -Three rows, each separated vertically by 36 of open space -Each row to consist of 2 sections of 48 wide maple, side-by-side -First row to begin 12 vertically from surface of floor Chairs: -Four fabric chairs with foot ring, casters, backrest & lumbar support. 23-28 adjusting height. Two chairs must have push-down locking castors that will prevent rolling whenever an individual is seated. The remaining two chairs do not require a locking castor. -Three fabric chairs with foot ring, casters, backrest & lumbar support. 17-22 adjusting height -6 fixed height (30) four-legged stools with round 13 diameter maple seat (v) Contract Terms and Conditions: Inspection and Acceptance Section E: DD 250. FOB Destination Deliveries or Performance Section F: All items shall be preserved, packaged, packed, and marked in accordance with best commercial practices. All items shall be shipped to: Lakehurst Naval Air Warfare Center, Attn: Matt Morgan, Highway 547, Bldg. 678, Lakehurst, NJ 08733. Contract Clauses Section I FAR 52.212-1 Instructions to Offerors-Commercial Items, is incorporated by reference 52.212-2, Evaluation-Commercial Items is incorporated by reference. Addendum Para (a): Award will be made to lowest price offeror. Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications- Commercial Items and DFARS 252.212.7000- Offeror Representations and Certifications- Commercial Items (SEP 1995) with its offer. 52.212-4 Contract Terms and Conditions - Commercial Items. The resulting contract will be firm fixed price (FFP) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items is incorporated in this contract by reference; the following provisions apply: 52.203-6, Restrictions on Subcontractor Sales to the Government with Alternate I; 52.219-14, Limitation on Subcontracting; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Disabled Veterans and Veterans of the Vietnam Era; 52.222-36, Affirmative Action for Handicapped Workers; 52.222-37, Employment Reports on Disabled Veterans and Veterans of the Vietnam Era; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.225-13, Restriction on Certain Foreign Purchases; 52.225-15, Sanctioned European Union Country End Products; 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels; 52.232-33 Payments by Electronic Funds TransferCentral Contractor registration; 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to the Defense Acquisitions of Commercial Items; 252.225-7001, Buy American Act and Balance of Payments Program; 252.204-7004 Alt A Central Contractor Registration Alt A; 252.232-7003 Electronic Submission of Payment Request (vii)Quotes are due by 12:00pm EST, 23 May 2008 at the Naval Air Warfare Center Aircraft Division Lakehurst, Attn: Code 25232 Jillian Kohler, Hwy 547, Bldg. 562, Lakehurst, NJ 08733-5082. The Government will not accept faxed quotes. You may e-mail your quote to jillian.kohler@navy.mil or mail it to her at the following address: Naval Air Warfare Center Aircraft Division, Contracts Dept. Bldg 562 Attn: Jillian Kohler, Highway 547, Lakehurst NJ 08733. (vii) Name and telephone number of individual to contact for information regarding the solicitation: Jillian Kohler, (732) 323-4586, e-mail: jillian.kohler@navy.mil. This Combined Synopsis/Solicitation will be posted on the NAVAIR homepage located at http://www.navair.navy.mil/doing_business/open_solicitation/. Hard copies of this Combined Synopsis/Solicitation and Amendments will NOT be mailed to contractors.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=ecdce8f0ab17473a3147c160f33f7872&tab=core&_cview=1)
- Record
- SN01568666-W 20080509/080507220605-ecdce8f0ab17473a3147c160f33f7872 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |