SOLICITATION NOTICE
K -- K- Notice of Intent to Single Source Award of Purchase Order for Turnkey Setup of Law Enforcement Vehicles
- Notice Date
- 4/7/2008
- Notice Type
- Presolicitation
- Contracting Office
- Division of Contracting and General Services U.S. Fish & Wildlife Service911 NE 11th Avenue Portland OR 97232
- ZIP Code
- 97232
- Solicitation Number
- 101818Q355
- Response Due
- 4/18/2008 5:00:00 PM
- Archive Date
- 4/7/2009
- Point of Contact
- Linda Askew Contracting Officer 5037364498 Linda_Askew@fws.gov;
- Small Business Set-Aside
- Total Small Business
- Description
- 1. GENERAL: The vendor must provide all specialized supplies, materials, equipment, and installation to completely outfit four turnkey Government-furnished law enforcement vehicles. The vendor must provide and install all specified equipment to set up a fully functional turnkey police vehicle in accordance with current industry standards for professional police vehicles. 2. SCOPE: The vendor will provide both the required equipment and specialized installation to set up four turnkey police vehicles. The vendor must be a master distributor for the major manufacturers of specialized equipment and fully demonstrate set up of police vehicles on a regular and recurring basis for a variety of law enforcement agencies. The vendor shall show an average installation not to exceed two weeks time to complete each police vehicle, following receipt of all required equipment. All work must be completed within 90-days of receipt of Government furnished equipment. This is a very specialized service and the vendor must demonstrate the ability to provide and properly install specialized police equipment and emergency vehicle identification including: visual warning devices (a variety of LED lights, strobe lights, headlight and tail light flashers, spotlights, etc.), audible warning devices (siren and public address system), communications equipment (radios, cellular phones, communications console), computer equipment, traffic radar systems, dash cam video and audio recording systems, specialized electronics systems (custom modular wiring harness, fuse panel, electrical management system), firearms security mounts with electronic locks for shotguns and rifles, aluminum security storage containers, prisoner transport cages and restraint equipment, and bureau law enforcement identification stripes and emblems. All installation work will be performed by qualified technicians who specialize in setting up police vehicles. Technicians must have demonstrated the ability to safely adapt police equipment installation criteria to fit the requirements of each specific vehicle make, model, and application; demonstrate professional ability in specialized vehicle electronics, police equipment installation, and custom design and fabrication of metal work; and the ability to professionally modify original factory equipment and systems to accommodate the installation of the additional police equipment. All installed electronic equipment must be wired into a specialized custom modular wiring harness and auxiliary fuse panel with labeled wires. Technicians are expected to professionally design and fabricate custom hardware, brackets, mounting systems, communications consoles, and firearms locking mounting systems to fit each specific vehicle and application. Technicians must insure that all vehicle systems are fully compatible in order to provide for the safety of law enforcement officers, and prevent damage to the vehicle electrical and electronic systems. Added specialized equipment must be fully integrated with original vehicle equipment, and all emergency equipment must be installed to operate as a completed turnkey system. 3. INSPECTION AND ACCEPTANCE: All equipment, installation locations, and installation methods must be approved in advance by the Technical Coordinator. All work to be performed shall be according to current industry standards for professional police vehicles. 4. GOVERNMENT FURNISHED EQUIPMENT/INFORMATION: The Government will provide the unequipped vehicles, police radios, and hands-free cellular telephone kit only. The contractor shall furnish all other labor, equipment, materials, supplies, parts, tools, facilities, and services to perform the requirements of this contract. The contractor shall take special care to protect Government furnished equipment during the performance of the work.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=cc4d57997d1bdf4cfad8d746070b47ea&tab=core&_cview=1)
- Place of Performance
- Address: PORTLAND, OR
- Zip Code: 972324181
- Zip Code: 972324181
- Record
- SN01548786-W 20080409/080407220501-cc4d57997d1bdf4cfad8d746070b47ea (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |