MODIFICATION
13 -- Silenced Stud Driver
- Notice Date
- 3/17/2008
- Notice Type
- Modification
- Contracting Office
- US Army ARDEC, AMSTA-AR-PC, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-08-X-0530
- Response Due
- 4/7/2008
- Archive Date
- 5/7/2008
- Point of Contact
- Carmen Lindstrom, Contract Specialist, (973)724-3146
- E-Mail Address
-
Email your questions to Carmen Lindstrom
(carmen.lindstrom1@us.army.mil)
- Description
- The U.S. Army, Joint Munitions and Lethality Life Cycle Management Command Acquisition Center (JM&L LCMC Acq Ctr), in support of the U.S. Army Research Development Engineering Command Armament Research Development and Engineering Center (RDECOM-ARDEC), is conducting a Market Survey to identify potential sources and vendors capable of providing a Silenced Stud Driver. The stud driver shall be similar in function to a commercial stud driver used in standard construction applications; however, the stud driver is required to emit no sound signature when operated. The stud driver shall operate through the discharge of a commercial off the shelf (COTS) caliber blank cartridge. Once discharged, the blank cartridge shall successfully drive a metallic rod into the target materials detailed below. Requirements are as follows: Length of Emplacement: 24 Hours Hang Weight Capability: Threshold: 50 lbs. Objective: 200 lbs Target: Threshold: Reinforced Concrete of 2.0 KSI Strength Objectives: Reinforced Concrete of 4.5 KSI Strength, Cinder Block, Wood, Metal, Adobe Probability of Successful Attachment per Mission: Threshold: 0.9 Attachment: Horizontally, stud will be parallel to the ground when attached to the target. The information must be submitted within 30 days from the date of this publication to: US Army JM&L LCMC Acquisition Center Bldg. 322, Carmen Lindstrom Picatinny Arsenal, NJ 07806-5000 carmen.lindstrom1@us.army.mil (W) 973-724-3146 (F) 973-724-8464 This market survey is for information and planning purposes only and does not constitute a Request for Proposal (RFP). This is not to be construed as a commitment by the U.S. Government. If a formal solicitation is generated at a later date, a solicitation notice will be published. No award will be made as a result of this market survey. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any private sector input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this survey. The information you provide will only be used by the U.S. Army in developing its acquisition approach for the Silenced Stud Driver Program.
- Web Link
-
US ARMY TACOM-Picatinny Procurement Network
(http://procnet.pica.army.mil/dbi/Download/GoGetSourcesSought.cfm?SolNum=W15QKN-08-X-0530)
- Record
- SN01534259-W 20080319/080317224017 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |