Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JANUARY 10, 2008 FBO #2236
MODIFICATION

81 -- ACCESSORY POUCH

Notice Date
10/30/2007
 
Notice Type
Modification
 
NAICS
326111 — Plastics Bag and Pouch Manufacturing
 
Contracting Office
General Services Administration, Federal Supply Service (FSS), Office Supplies & Administrative Services Acquisition Center (2FY), 26 Federal Plaza, New York, NY, 10278, UNITED STATES
 
ZIP Code
10278
 
Solicitation Number
QSDABB-AD-1132
 
Response Due
12/10/2007
 
Point of Contact
Mitchell Jarvis, Contracting Officer, Phone (212) 264-3349, Fax (212) 264-1780, - Mitchell Jarvis, Contracting Officer, Phone (212) 264-3349, Fax (212) 264-1780
 
E-Mail Address
mitchell.jarvis@gsa.gov, mitchell.jarvis@gsa.gov
 
Description
This FBO has been modified to extend for 15 extra days due to the addition of a new Item Purchase Description. Also please note that diagrams and pictures of the pouch has also been added. However, please E:Mail or call for these copies. This is a request for quote/PART NUMBER OR EQUAL, for Accessory Pouch, NSN:8105-01-419-1132, Part#1412-7883-700 to fill three requisitions to the following locations: # QTY U/I Shipping Address M94430-7260-BOM1 1,015 EA. New Cumberland, PA MMX200-7271-0951 214 EA. " " MMX200-7257-3325 235 EA. " " TOTAL QTY 1,464 EA. All interested in submitting a quote should respond. Please contact Mitchell Jarvis at 212-264-3349 or E:Mail him at mitchell.jarvis@gsa.gov no later than the Closing Date of Monday December 10, 2007, at 4:30 P.M. 8105-01-419-1132 UI: EA 8105-01-419-1132 UI: EA POUCH, ACCESSORY DESCRIPTION I.A.W. BELOW DESCRIPTION AND APPLICABLE DRAWINGS FIG.1, FIG.2, FIG.3., & FIG.4. GENERAL DESCRIPTION: POUCH IS DESIGNED TO HOLD CERTAIN ACCESSORIES BY THE MEANS OF ELASTIC STRIPS THAT ARE PERMANENTLY ATTACHED TO THE POUCH. POUCH CAN BE FOLDED AND SECURED BY THE MEANS OF HOOK & LOOP VELCRO STRIPS. WHEN NECESSARY, POUCH CAN BE ATTACHED TO THE WALL OR OTHER FLAT SURFACE BY THE MEANS OF SELF ADHESIVE STRIPS LOCATED ON THE BACK. NOMINAL DIMENSIONS: 14.8 WIDE X 14.0 LONG OVERALL (UNFOLDED) COLOR: BLACK OVERALL (ALL PARTS) MATERIAL: TRIPLE LAMINATED VINYL OVERALL SHEET THICKNESS: 0.020 ELASTIC STRAPS (8 TOTAL): POUCH SHALL CONTAIN EIGHT ELASTIC STRAPS DESIGNED TO HOLD ACCESSORIES. EASH STRAP SHALL BE MADE OF ELASTIC NYLON AND SHALL BE ABLE TO STRETCH NOT LESS THAN 200% OF THE ORIGINAL LENGTH WITHOUT BRAKING, TEARING OR CRACKING. STRAPS SHALL BE ATTACHED TO THE POUCH BY BLACK STITCHES IN ACCORDANCE WITH INDUSTRY STANDARDS. EACH ELASTIC STRAP SHALL BE RAISED TO PROVIDE A HALF ( ) CIRLE CIRCUMFERENCE TO ACCOMMODATE ROUND SHAPED ACCESSORIES. (SEE FIG.3 FOR GENERAL ILLUSTRATION) LONG VELCRO STRAPS (2 TOTAL): POUCH SHALL CONTAIN TWO LONG BACK TO BACK NYLON VELCRO FASTENERS OF THE HOOK & LOOP TYPE IN ACCORDANCE WITH INDUSTRY STANDARDS. THESE STRAPS ARE DESIGNED FOR CLOSURE OF THE POUCH WHEN POUCH IS FOLDED FOR BACK TO BACK FASTENING. SHORT VELCRO STRAPS & ADHESIVE: POUCH SHALL CONTAIN TWO SETS OF NYLON VELCRO HOOK & LOOP FASTENERS WITH PRESSURE SENSITIVE ADHESIVE BACKING AND LINER FOR ATTACHING THE POUCH TO THE WALL OR OTHER SURFACE. THE TWO HOOK TYPE VELCROS SHALL BE PERMANENTLY ATTACHED TO THE POUCH. THE OTHER TWO LOOP TYPE VELCROS SHALL BE LOCKED WITH THE HOOK TYPE VELCROS, AND SHALL CONTAIN AN ADHESIVE ON THE OTHER SIDE WITH THE LINERS PROTECTORS. WORKMANSHIP: Each pouch shall be uniformly fabricated in accordance with good commercial practice, and be free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter. FIRST ARTICLE INSPECTION: First article inspection is required once in the beginning of the contract. It is also required during the contract, if there is a change in the manufacturing process, materials, or both. No other inspections are necessary for the duration of the contract, unless otherwise specified by the Contracting officer. Certificates of conformance are acceptable, unless otherwise specified by the Contracting officer. The Government reserves the right to inspect the product at any time, and to verify the validity of the certification. PACKAGING/PACKING PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight. MARKING For civilian destinations - In accordance with FED-STD-123G, dated June 6, 1997. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 3, dated October 29, 2004. Bar code marking shall be included for both civilian and military destinations. PALLETIZATION IN ACCORDANCE WITH PALLETIZATION REQUIREMENT, DATED 8/15/2004, UNLESS OTHERWISE INDICATED IN THE CONTRACT OR PURCHASE ORDER. PCM Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR). Please be advised for diagrams and pictures of the bag, please contact Mitchell Jarvis at 212-264-3349, or E:Mail him at mitchell.jarvis@gsa.gov. NOTE: THIS NOTICE MAY HAVE POSTED ON FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (30-OCT-2007). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 08-JAN-2008, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 
Web Link
Link to FedBizOpps document.
(http://www.fbo.gov/spg/GSA/FSS/2FY/QSDABB-AD-1132/listing.html)
 
Place of Performance
Address: General Services Adminstration, Products Acquisition Branch (QSDABB), 26 Federal Plaza, Room 19-116, New York, N.Y.
Zip Code: 10278
Country: UNITED STATES
 
Record
SN01481236-F 20080110/080108224848 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.