MODIFICATION
34 -- Vertical Machining Centers
- Notice Date
- 8/27/2007
- Notice Type
- Modification
- NAICS
- 333298
— All Other Industrial Machinery Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AAC - Air Armament Center, AAC/PK 205 West D Avenue, Suite 433, Eglin AFB, FL, 32542-6864, UNITED STATES
- ZIP Code
- 32542-6864
- Solicitation Number
- FA9200-07-M-0286
- Response Due
- 9/4/2007
- Archive Date
- 9/19/2007
- Point of Contact
- Elesha Gentry, Contract Specialist , Phone (505)679-3305, Fax (505)679-3378,
- E-Mail Address
-
Elesha.Gentry@46tg.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The Air Armament Center, Eglin AFB FL, intends to solicit and award firm-fixed price contract for two (2) machining centers. This requirement is as follows: CLIN 0001 (1 EA) Mazak Nexus 510C #50 Vertical Machining Center (specifications attached) with Mazatrol Fusion 640M Control and Installation CLIN 0002 (1 EA) Mazak V-655/80R (specifications attached) with Mazatrol Fusion 640M Control and Installation These items must be delivered to: 846TH Test Group, 1521 Test Track Road, Holloman AFB NM 88330 no later than 16 weeks after receipt of order on an FOB Destination basis. The North American Industry Classification System (NAICS) for this acquisition is 333298 ? All Other Industrial Machinery Manufacturing, small business size standard: 500 employees. This is a combined synopsis/solicitation for commercial items prepared in accordance with the Federal Acquisition Regulation (FAR) Subpart 12.6 and Subpart 13.5, as supplemented with additional information included in this notice. This solicitation is a request for competitive proposals/quotes. This acquisition is a small business set-aside. Please identify your business size in your response based upon this standard. Questions shall be submitted electronically to elesha.gentry@46tg.af.mil. Numbered Note 1 applies. Notice to Offerors: Funds are not presently available for this project. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-19. The following clauses are incorporated by reference: FAR 52-212-1, Instructions to Offerors-Commercial Item and any addenda to the provisions; 52.212-2, Evaluation-Commercial Items; Technical Capability is more important than price; 52-212-3, Offeror Representations and Certifications-Commercial Items (Offerors must submit a complete copy with their offers); 52.212-4 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, incorporating the following: 52.204-7, Central Contractor Registration 52.211-6, Brand Name 52.222-3, Convict Labor 52.222-19, Child Labor ? Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Special Disable Veterans, Veterans for the Vietnam Era, and Other Eligible Veterans 52.222-36, Affirmative Action for Workers with Disabilities 52.222-37, Employment Reports on Special Disable Veterans, Veterans for the Vietnam Era, and Other Eligible Veterans 52.225-3, Buy American Act, Free Trade Agreements, Israeli Trade Act 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer, Central Contractor Registration 52.223-11, Ozone-Depleting Substances 52.232-18, Availability of Funds 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.247-34, F.O.B. Destination 52.252-2 Clauses Incorporated by Reference (FEB 98); This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil. 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items 252.204-7004 Alternate A 252.225-7001, Buy American Act and Balance of Payment Program 252.225-7036, Buy American Act; Free Trade Agreements; Balance of Payment Program 252.232-7003, Electronic Submission of Payment Report 252.247-7023, Transportation of Supplies by Sea, with Alt III 252.225-7002, Qualifying Country Sources as Subcontractors Vendors must be registered in Central Contractor Registration (www.ccr.gov) before award can be made. All responses must be received no later than 2:00 PM Mountain Time, 31 August 2007. The quote is at the discretion of the offeror. Send all packages to 46th Test Group, AAC/PKZB, Attn: Elesha Gentry, 872 DeZonia Road, (Bldg 1085) Holloman AFB NM 88330 or email to elesha.gentry@46tg.af.mil. Point of Contact: Elesha Gentry, Contract Specialist, Phone 505-679-3305, Fax 505-679-3378, email: elesha.gentry@46tg.af.mil or Barbara Minto, Contracting Officer, Phone 505-572-1245, Email: barbara.minto@46tg.af.mil. SPECIFICATIONS: SPECIFICATIONS FOR MAZAK MTV-655/80NR w/MAZATROL FUSION 640M CONTROL STANDARD MACHINE EQUIPMENT: 30 Tool Chain Magazine Synchronized Tapping Complete Cooling System One Set of Manuals (Programming, Operating, Tooling, Maintenance and Electrical) One Set of Adjusting Tools Work Light Foundation Kit (Anchor Bolts & Plates) Installation MAZATROL FUSION 649 SPECIFICATIONS FEATURES: Mazatrol Fusion 640M Control with the following: 10.4 Inch Color TFT I C Memory Card Interface RS-232 C 3.5? Floppy Disc Drive PCMCIA Type II Slots Machining Navigation ? Prediction Machining Navigation ? Monitor Machining Navigation ? Results Inch/Metric Conversion Adaptive Feed Rate Control (Mazatrol) Tool Life Monitoring (Mazatrol) Tool Breakage Recovery (Mazatrol) Tool Length Measurement (Mazatrol) Mazak Tapping/Boring Tornado (Mazatrol and EIA/ISO) Synchronized Tapping Background Tool Path Check 48 Letter Program Name Machining Navi-Monitor and Navigation Mazacc 2-D High Speed Programming Software (G61.1) Programming Enhancements: G00 Slope Constant Thread Cutting Function User Macro Spiral Interpolation Additional Variables (600 Pairs) 3D Compensation G93 Inverse Time Feed Shape Rotation (M98) G37 Automatic Tool Length Measurement Geometric Command Sequence Number Comp. Stop Function Program Scaling (G50, G51) G54.1~ Add. Workpiece Coordinate Workpiece Coord. Shift STANDARD SPECIFICATIONS: Pallet Size 88? x 25.6? Floor Space Required 218.3? x 139.3? Machine Height from Bottom Base 115.9? Total Power Required (Machine Only) 45.5 KVA Machine Weight 26,460 lbs Travels: X-Axis Travels 78.7? Y-Axis Travels 25.59? Z-Axis Travels 25.59? Distance from Spindle Center to Top of Pallet: 7.87? ? 33.46? Workpiece Size: Maximum Table Load 5,500 lbs Maximum Workpiece Height 30.31? Spindle Spindle Nose #50 Spindle Horsepower (30 Min/Cont) 25 HP/20 HP Obtains Full HP @ (30 Min) 22-223 RPM / 1500 4500 RPM Constant Torque Range 529 Ft ? Lbs Spindle RPM 25 ? 6000 RPM Spindle Speed Increment 1 RPM Number of Ranges 2 Tool Clamping Force 3.960 lbs Spindle Bearings Front Ang.Cont.Ball Bgs (5.91 OD/3.94 ID) Spindle Bearings Rear Ang.Cont.Ball Bgs (5.91 OD/294 ID) Automatic Tool Changer: Magazine Capacity 30 Tool-to-Tool Time 2.4 sec. Chip-to-Chip Time (approx) 6.0 sec Maximum Tool Diameter 4.92? Max. Tool Dis.w/Adj. Pockets Empty 10.23? Maximum Tool Length 15.74? Maximum Tool Weight 44 lbs Servo/Axis Drives: Type of Servo Drives AC Servo Rapid Traverse Rate (X&Y Axis) 1024 IPM Rapid Traverse Rate (Z- Axis) 787 IPM Max Programmable Feedrate (X&Y Axis) 315 IPM Max Programmable Feedrate (Z Axis) 315 IPM X-Axis Thrust (Cont) 2112 lbs Y-Axis Thrust (Cont) 2050 lbs Z-Axis Thrust (Cont/30% Duty) 1808/2699 dn lbs Static Machine Accuracies Unidirectional Positioning Accuracy Full Travel +/- 0.0002? Unidirectional Repeatability Full Travel +/- 0.00006? Based on ISO Standards ADDITIONAL OPTIONS/OPTIONAL EQUIPMENT: Hi-Pressure Coolant Thru Sys (15KGF, 213PSI) Prep Coolant Thru Spindle (15KG, 213 PSI) Workpiece Air Blast Flood Coolant 4.5KG (64PSI), 30L (8GAL) Cover Coolant TBR & MMS IN EIA/ISO Program Macro Manual Pulse Generator (1 PCE) Palm Size Manual Pulse Generator 3 (Detachable) Monitoring System B Inductive Type MP3 Chip Conveory Rear Disp (Hinge/for Iron) Mazak Micro Disk (Incl One Floppy Disk) Auto Pecking Cycle with Load Detection High-Precision Boring Tornado Cycle High Smoothing Control Cylindrical Interpolation Protocol B RS-232C K6MAZ-640-45 Fine Spline Interpolation (EIA) K6MAZ-640M-26 Optimizer (2 CD-ROMS) Technical Library SPECIFICATIONS FOR MAZAK VCN-510C #50 WITH MAZATROL FUSION 640 CONTROL STANDARD EQUIPMENT: MAZATROL PC-Fusion-CNC 640MN Nexus Control (10.4 Color LCD) Includes: Mazak Tapping/Boring Tornado (Mazatrol), RS 232C Interface, EIA/ISO, Background Tool Path Check, Floppy Disk Unit, 48 Letter Program Names, and Machining Navi-Monitor 24 Tool Servo Driven Magazine Multi-tap Transformer which accommodates from 190-500 volts Spindle Cooler Complete Coolant System (Coolant Tank Capacity 66 Gal) Chip & Coolant Guards Manual Tool Length Measurement Foundation Kit that includes leveling plates only DOCUMENTATION: Manuals: One (1) Each: Programming, Operating, Tooling, Maintenance, Parts List and Electrical Circuit Diagrams; DETAIL SPECIFICATIONS: Table Size 51.2? x 21.6? X-Axis Stroke 41.3? Y-Axis Stroke 20.0? Z-Axis Stroke 23.0? Spindle Face to Table Surface 26.0? Column Face to Spindle Center 22.6? Maximum Table Weight Capacity 2,646 lbs Spindle Speed 6,000 RPM Spindle Motor (30MIN/CONT) 30/25 HP Spindle Taper #50 Rapid Traverse (X,Y,Z) 1417.3 IPM Number of Tools 24 Maximum Tool Diameter 4.1? Maximum Tool Diameter (Adjacent Pockets) 8.26? Maximum Tool Length 13.78? Maximum Tool Weight 33 lbs Tool Select Method Random Tool Change Time (Chip to Chip) 5.2 sec Power Supply (15MIN/CONT) 47.6/39.9 kVA Machine Height 119.93? Floor Space 113.4? x 111.6? Machine Weight 14,770 lbs Mazatrol Fusion 640M Nexus Control 10.4? Color LCD Champion EIA/ISO Package (includes) Additional Variables (Total 600 Pairs) Mazak Tapping / Boring Tornado (EIA/ISO) EIA/ISO Code Input Function Additional EIA/ISO Functions: Spiral Interpolation (EIA) Pattern Rotation (EIA) 3 Dimensional Cutter Compensation (EIA) Geometric Command (EIA) Scaling (EIA) External Data Input/Output (EIA) Inverse Time Feed G37 Automatic Tool Length Measurement Sequence Comparison Stop Function Additional Workpiece Coordinate System (G54.1) Thread Cutting Function OTHER OPTIONS: Hi-Press Coolant Thru Sys (15KGF, 213PSI) (Includes Flood Coolant CS1645622C0) Workpiece Air Blast Chip Conveyor Left Disp (Hinge/For Steel) -Inverter type chip conveyors have automatic load sensors that can reverse automatically to clear obstructions -Selectable conveyor speeds eliminate excessive coolant discharge. -High tech operations through selectable menu keys. Auto Tool Length Measurement & Break. Detect. Renishaw TS27R Mazak Monitoring Sys. B Optical Type OMP40 Inspection plus EIA/ISO Meas. Sys. For Mazatrol Fusion 640Mn Auto Pecking Cycle with Load Detection High-Precision Boring Tornado Cycle Champion Mazatrol Optional Package Including the following software: Synchronized Tapping GOO Slope Constant MAZACC-2D Software (Shape Compensation) IC Memory Card Interface Cylindrical Interpolation PCMCIA Interface (2 ?Slot) Absolute Encoder Sys N/A with S/F-3AX IC Memory Card Operation Optimizer Technical Library Digital Documentation (2 CD-ROMS) NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (27-AUG-2007); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/AFMC/AAC/FA9200-07-M-0286/listing.html)
- Place of Performance
- Address: Address: 1521 Test Track Road Holloman AFB New Mexico Postal Code: 88330 Country: United States
- Zip Code: 88330
- Country: UNITED STATES
- Zip Code: 88330
- Record
- SN01387073-F 20070829/070827223310 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |