SOLICITATION NOTICE
95 -- Metal Sheet Piling, ASTM A 572, Grade 50, Hot Rolled
- Notice Date
- 8/14/2007
- Notice Type
- Solicitation Notice
- NAICS
- 331111
— Iron and Steel Mills
- Contracting Office
- US Army Corps of Engineers, Pittsburgh District, 1000 Liberty Avenue, W.S. Moorhead Federal Building, 21st Floor, Pittsburgh, PA 15222-4186
- ZIP Code
- 15222-4186
- Solicitation Number
- W911WN07R0012
- Response Due
- 8/28/2007
- Archive Date
- 10/27/2007
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR, Subpart 12.6, as supplemented with additional information included in this notice. This notice constitutes the only Request for Proposal (RF P); proposals are being requested, and a written solicitation will not be issued. The RFP document and contract incorporated provisions and clauses are in effect through Federal Acquisition Circular (FAC) 2005-18, Effective 30 Jun 2007 & Class Deviation 2 005-o0001. 1. The following sheet piling is requested: Item 1: Sheet Piling, PS 31, 69 ft. long, painted as specified 360 Sheets Item 2: Sheet Piling, PS 27.5, 69 ft. long, uncoated. 705 Sheets Item 3: Sheet Piling, FY 3100 Std. Fab. Wye, 69 ft. long, uncoated. 2 Each Item 4: Sheet Piling, FY 3101 Std. Fab. Wye, 69 ft. long, uncoated. 2 Each Item 5: Sheet Piling, FY 3102 Std. Fab. Wye, 69 ft. long, uncoated. 1 Each Item 6: Sheet Piling, FY 3103 Std. Fab. Wye, 69 ft. long, uncoated. 2 Each Item 7: Sheet Piling, PS 31, 69 ft. long, uncoated 6 Sheets Item 8: Unloading, Storage and Handling 1 Lump Sum 2. SUBMITTALS: Each shipment shall be accompanied by certified test reports. Reports shall show that sheet piling meet the specified requirements. Material test reports shall meet the requirements of ASTM A 6/A 6M. Identification data to include piling type, dimensions, chemical composition, mechanical properties, section properties, heat number, and mill identification mark. 3. INSPECTION: The Contracting Officers Representative may inspect the piling prior to shipment from the mill to verify compliance with the contract requirements, including straightness and conditions of interlocks. Piling specified to be painted will be inspected prior to shipment from the coating facility for condition of the paint coating. All piling will be inspected upon arrival at the specified storage site. 4. MATERIALS: 4.1. Metal Sheet Piling: ASTM A 572, Grade 50, hot-rolled. The materials shall be new and undamaged. All sheets full length. The manufacturer's logo and mill identification mark shall be provided on the sheet piling as required by the referenced specifi cations. 4.2. Bolts: ASTM A 325, Type 1 4.3. Nuts: ASTM A 563. 5. PAINTING: Surface preparation SSPC SP10. Primer SSPC Paint 22, surface tolerant epoxy primer, high-build surface epoxy mastic similar to Devoe BAR RUST 235 or Carboline CARBOMASTIC 90 or 801 or approved equal, min 2 mils DFT. Intermediate and topcoats epoxy paint suitable for protection of surfaces subject to unusual abrasive and wear conditions, similar to Devoe DEVGRIP 238, or an approved equal. Two coats, min. 10 mils DFT each. Top coat black. 6. FABRICATION: Workmanship and installation of bolts shall conform to the applicable provisions of ASTM A 325. 7. DELIVERY, UNLOADING, STORAGE AND HANDLING: Deliver to the Corps of Engineers Victory Hollow Off-loading Site, approx. RM 34.1 Monongahela River Mile 34.1, off of State Route 837, Carroll Twp., Washington Co., PA. Contact: Lower Mon Area Office, 1811 Schoonmaker Ave., Monessen, PA 15062, Kirk McWilliams, Resident Engineer, (724)-684-7462. Provide all equipment, labor, materials and supplies to unload and stack the piling. Unload, handle and store as recommended by the manufacturer. Do not exceed sta ck height and weight as shipped from the mill. Use blocking to maintain piling in a level position. Located directly over any blocking placed below and space no more than 10 feet apart and no more than 2 feet from the ends 9 SAFETY REQUIREMENTS: Performed work at delivery site in accordance with EM 385-1-1, Corps of Engineers Safety and Health Requirements Manual and applicable Federal, state, and local laws, ordinances, criteria, rules and regulations. The offeror shall provide a proposed delivery schedule with their quote. Offeror shall include completed copies of th e provisions at 52.212-3, Alt I, and 252.212-7000, Offerors Representations and Certifications-Commercial Items, with its quote. Offers are due to U.S. Army Engineer District, Pittsburgh, Contracting Branch, W. S. Moorehead Federal Building, 1000 Liberty Avenue,21st Floor, Pittsburgh, PA 15222-4186, or by fax 412-644-5109, no later than 11:00 a.m. EDST on 28 August 2007. Clauses applicable to this acquisition are as follows. The full text of a clause may be accessed electronically at http://farsite.hill .af.mil/VFFARa.htm and http://www.hq.usace.army.mil/cepr/asp/library/efar.asp. 52.203-3, Gratuities (APR 1984); 52.203-11, Certification And Disclosure Regarding Payments To Influence Certain Federal Transactions, (SEP 2005); 52.212-1, Instructions to Off erors--Commercial Items (SEP 2006); 52.212-4, Contract Terms and ConditionsCommercial Items (FEB 2007); 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (FEB 2007); 52.219-8, Utilization of Small Business Concerns (May 2004); 52.222-3, Convict Labor (June 2003); 52.222-19, Child LaborCooperation with Authorities and Remedies (JAN 2006); 52.222-21, Prohibition of Segregated Facilities (FEB 1999); 52.222-26, Equal Opportunity (MAR 2007); 52.222-35 , Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006); 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998); 52.222-37, Employment Reports on Special Disabled Veterans, Vete rans of the Vietnam Era, and Other Eligible Veterans (SEP 2006); 52.232-33, Payment by Electronic Funds TransferCentral Contractor Registration (OCT 2003); 52.242-13, Bankruptcy (JUL 1995); 52.242-15, Stop-Work Order (AUG 1989); 52.247-34, F.O.B. Destina tion (NOV 1991); 252.204-7004 Alt A, Central Contractor Registration (52.204-7) Alternate A (NOV 2003); 252.204-7006, Billing Instructions (OCT 2005); 52.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist Country (JUN 2005); 252 .209-7004, Subcontracting With Firms That Are Owned or Controlled By The Government of a Terrorist Country (DEC 2006); 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Comm ercial Items (APR 2007); 252.225-7000, Buy American ActBalance of Payments Program Certificate (JUN 2005); 252.225-7001, Buy American Act and Balance of Payments Program (JUN 2005); 252.225-7002, Qualifying Country Sources As Subcontractors (APR 2003); 25 2,225-7012, Preference for Certain Domestic Commodities (JAN 2007); 252.225-7031, Secondary Arab Boycott Of Israel (JUN 2005); 252.243-7002, Requests for Equitable Adjustment (MAR 1998); 252.247-7023, Transportation of Supplies by Sea (May 2002).
- Place of Performance
- Address: US Army Corps of Engineers, Pittsburgh District 1000 Liberty Avenue, W.S. Moorhead Federal Building, 21st Floor Pittsburgh PA
- Zip Code: 15222-4186
- Country: US
- Zip Code: 15222-4186
- Record
- SN01372354-W 20070816/070814221909 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |